From: Bjorn Andersson <andersson@kernel.org>
To: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>,
Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>,
Yu Zhang <yu.zhang@oss.qualcomm.com>,
devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 0/5] arm64: dts: qcom: nord: Add PCIe and WLAN support
Date: Sun, 27 Sep 2026 20:56:17 -0500 [thread overview]
Message-ID: <arnJDVmtFk3JoT87@zenbook> (raw)
In-Reply-To: <20260915015632.283642-1-shengchao.guo@oss.qualcomm.com>
On Tue, Sep 15, 2026 at 09:56:27AM +0800, Shawn Guo wrote:
> This series enables PCIe on the Qualcomm Nord SoC and brings up the WLAN
> modules on the two reference boards.
>
> Nord has four PCIe controllers fed by a single quadfurcated Gen5 QMP
> multi-PHY. The link topology (x16, x8+x8, x8+x4+x4 or x8+x4+x2+x2) is
> selected by firmware through a TCSR register that the PHY driver reads at
> probe time, so the DT only describes the PHY ports and hands the driver
> the TCSR handle. Patch 1 adds the PHY, the four controllers and the PCIe
> SMMU; patches 2 and 3 enable them on the IQ10 Robotics Reference Design
> and the Ride Embedded board respectively, along with the per-port PERST#
> and WAKE# lines.
>
> Patches 4 and 5 add the WCN7850 WLAN module sitting on PCIe2 on both
> boards. The two boards power the module differently: the Ride Embedded
> connectivity adapter card derives the core rails from the module DBUs
> gated by PWR_CORE and PWR_CTRL1, whereas the RRD generates them with
> discrete on-board bucks behind a single core power enable. Both are
> described as they are wired.
>
> This depends on the Nord Gen5x16 multi-PHY driver support [1], without
> which the PHY does not probe.
>
> Dependencies:
> - PCIe and PHY: https://lore.kernel.org/all/20260909-nord-v3-0-b0a82721c547@oss.qualcomm.com/
This doesn't look like it will be merged, please retest and resubmit
once the dependencies has been accepted.
Thanks,
Bjorn
> - DTS prerequisite: https://lore.kernel.org/all/20260904081619.593602-1-shengchao.guo@oss.qualcomm.com/
>
> Changes for v2:
> - Add missing leading zero for pcie_smmu reg property
> - Link to v1: https://lore.kernel.org/all/20260914071944.164217-1-shengchao.guo@oss.qualcomm.com/
>
> Krishna Chaitanya Chundru (3):
> arm64: dts: qcom: nord: Add PCIe PHY and controller nodes
> arm64: dts: qcom: nord-rrd: Enable PCIe controllers and PHY
> arm64: dts: qcom: nord-ride-embedded: Enable PCIe controllers and PHY
>
> Shawn Guo (1):
> arm64: dts: qcom: nord-rrd: Add WCN7850 WLAN support
>
> Yu Zhang(Yuriy) (1):
> arm64: dts: qcom: nord-ride-embedded: Add WCN7850 WLAN support
>
> arch/arm64/boot/dts/qcom/nord-embedded.dtsi | 926 +++++++++++++++++-
> .../boot/dts/qcom/nord-ride-embedded.dts | 151 +++
> arch/arm64/boot/dts/qcom/nord-rrd.dts | 158 +++
> arch/arm64/boot/dts/qcom/nord.dtsi | 297 ++++++
> 4 files changed, 1528 insertions(+), 4 deletions(-)
>
> --
> 2.43.0
>
prev parent reply other threads:[~2026-09-28 1:56 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-15 1:56 Shawn Guo
2026-09-15 1:56 ` [PATCH v2 1/5] arm64: dts: qcom: nord: Add PCIe PHY and controller nodes Shawn Guo
2026-09-15 1:56 ` [PATCH v2 2/5] arm64: dts: qcom: nord-rrd: Enable PCIe controllers and PHY Shawn Guo
2026-09-15 1:56 ` [PATCH v2 3/5] arm64: dts: qcom: nord-ride-embedded: " Shawn Guo
2026-09-15 1:56 ` [PATCH v2 4/5] arm64: dts: qcom: nord-ride-embedded: Add WCN7850 WLAN support Shawn Guo
2026-09-15 1:56 ` [PATCH v2 5/5] arm64: dts: qcom: nord-rrd: " Shawn Guo
2026-09-28 1:56 ` Bjorn Andersson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=arnJDVmtFk3JoT87@zenbook \
--to=andersson@kernel.org \
--cc=brgl@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krishna.chundru@oss.qualcomm.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=shengchao.guo@oss.qualcomm.com \
--cc=yu.zhang@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®