From: Andrea Righi <arighi@nvidia.com>
To: Tejun Heo <tj@kernel.org>
Cc: Kuba Piecuch <jpiecuch@google.com>,
David Vernet <void@manifault.com>,
Changwoo Min <changwoo@igalia.com>,
Emil Tsalapatis <emil@etsalapatis.com>,
sched-ext@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCHSET sched_ext/for-7.3-fixes] sched_ext: Fix missing ops.dequeue() on remote local DSQ moves
Date: Tue, 29 Sep 2026 20:30:32 +0200 [thread overview]
Message-ID: <arwDyGUX7Uq_oeHg@gpd4> (raw)
In-Reply-To: <46f4b66249f016b675fa16446b2f2f99@kernel.org>
On Tue, Sep 29, 2026 at 07:13:07AM -1000, Tejun Heo wrote:
> Hello,
>
> On Tue, Sep 29, 2026 at 04:17:23PM +0000, Kuba Piecuch wrote:
> > Since ebf1ccff79c4 ("sched_ext: Fix ops.dequeue() semantics"), every task
> > entering the BPF scheduler's custody gets exactly one ops.dequeue() when
> > it leaves it. A dispatch to a terminal DSQ ends custody with a flag-less
> > ops.dequeue() at insertion time.
>
> The fix looks good to me. It effectively reverts the enqueue_task_scx()
> half of b75aaea24c9f ("sched_ext: Properly mark SCX-internal migrations
> via sticky_cpu"), which as far as I can see only ever suppressed this
> ops.dequeue(). Andrea, can you confirm?
Yes, I confirm. The source-side sticky_cpu assignment remains in place across
deactivate_task(), so the internal migration doesn't trigger ops.dequeue().
Kuba, thanks for catching this!
>
> - dequeue_remote.c isn't built until 3/3, so 1/3 can't be built or run.
> Can you put the fix first, followed by the test with its Makefile entry?
>
> - 2/3: 7.1.y also needs 18d62044cda7 ("sched_ext: Preserve rq tracking
> across local DSQ dispatch"). Without it, the nested ops.dequeue() trips
> lockdep when ops.dispatch() uses scx_bpf_dsq_move() to another CPU's
> local DSQ. It's tagged for stable too, but maybe note it as a
> prerequisite?
Agreed. Please mention 18d62044cda7 as a prerequisite for 7.1.y.
Thanks,
-Andrea
>
> - 2/3: With sub-scheds, scx_resolve_local_dsq() can divert the task to the
> reject or rescue DSQ, so "inserted into the local DSQ" in the comments
> isn't always accurate. Maybe "destination DSQ"? The new comment in
> enqueue_task_scx() could be two lines, and the description could lead
> with the late SCX_DEQ_CORE_SCHED_EXEC and be a lot shorter.
>
> - 1/3: A task can only be picked straight out of custody through
> sched_core_find(), which only returns tasks with a core cookie. Checking
> p->core_cookie on SCX_DEQ_CORE_SCHED_EXEC would be exact and would
> remove core_sched_in_use() and the skip.
>
> - 1/3: _SC_NPROCESSORS_ONLN ignores affinity. With the runner confined to
> one CPU, the test fails instead of skipping. sched_getaffinity() and
> CPU_COUNT()?
>
> - 1/3: Nits. If the /proc scan stays, PR_SCHED_CORE_GET writes a u64, so
> the cookie should be u64. ops.dispatch() pops one entry per call, so a
> stale one idles the CPU until the next kick. Maybe loop a few times?
> missed_dequeue_cnt and core_sched_exec_dequeue_cnt aren't printed
> per-scenario like the other counters.
>
> - 1/3: The variants, error conditions and core-sched caveat are repeated
> across the cover, description, file header and comments. Can you say
> each once? Also, single-line comments are usually lowercase in
> sched_ext.
>
> Thanks.
>
> --
> tejun
>
prev parent reply other threads:[~2026-09-29 18:30 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-29 16:17 Kuba Piecuch
2026-09-29 16:17 ` [PATCH 1/3] selftests/sched_ext: Add a test for " Kuba Piecuch
2026-09-29 18:42 ` Andrea Righi
2026-09-29 16:17 ` [PATCH 2/3] sched_ext: Call ops.dequeue() when a task arrives on a remote local DSQ Kuba Piecuch
2026-09-29 18:33 ` Andrea Righi
2026-09-29 16:17 ` [PATCH 3/3] selftests/sched_ext: Enable the dequeue_remote test Kuba Piecuch
2026-09-29 17:13 ` [PATCHSET sched_ext/for-7.3-fixes] sched_ext: Fix missing ops.dequeue() on remote local DSQ moves Tejun Heo
2026-09-29 18:30 ` Andrea Righi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=arwDyGUX7Uq_oeHg@gpd4 \
--to=arighi@nvidia.com \
--cc=changwoo@igalia.com \
--cc=emil@etsalapatis.com \
--cc=jpiecuch@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sched-ext@lists.linux.dev \
--cc=tj@kernel.org \
--cc=void@manifault.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®