[PATCH v10 0/4] arm64: dts: imx8mp-skov: add new 7" variant

[PATCH v10 0/4] arm64: dts: imx8mp-skov: add new 7" variant

[Steffen Trumtrar]

Add a new board variant for the Skov i.MX8MP based family of boards.

This variant uses a different 7" panel than the existing ones.
As the already upstream boards and this new one are almost identical,
convert the other device trees to a base devicetree and apply the touch
controllers and panels via overlays.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
Changes in v10:
- rebase onto imx-dt64-7.4
- rearrange binding and code patches
- Link to v9: https://patch.msgid.link/20261008-v7-0-topic-imx8mp-skov-dts-jutouch-7inch-v9-0-11fa90f531fc@pengutronix.de

Changes in v9:
- fix dtbscheck error
- squash new compatible into 7" devicetree patch
- Link to v8: https://patch.msgid.link/20260831-v7-0-topic-imx8mp-skov-dts-jutouch-7inch-v8-0-e2e635452ba9@pengutronix.de

Changes in v8:
- add #address-cells and #size-cells to i2c2
- fix touchscreen resolution
- add missing binding includes
- Link to v7: https://patch.msgid.link/20260727-v7-0-topic-imx8mp-skov-dts-jutouch-7inch-v7-0-ca8a0446166a@pengutronix.de

Changes in v7:
- address more of sashikos rightful feedback
- Link to v6: https://patch.msgid.link/20260727-v7-0-topic-imx8mp-skov-dts-jutouch-7inch-v6-0-fa8f71dfc56f@pengutronix.de

Changes in v6:
- address sashikos rightful feedback
- Link to v5: https://patch.msgid.link/20260727-v7-0-topic-imx8mp-skov-dts-jutouch-7inch-v5-0-67faa5ee0bf6@pengutronix.de

Changes in v5:
- convert to overlays
- Link to v4: https://patch.msgid.link/20260706-v7-0-topic-imx8mp-skov-dts-jutouch-7inch-v4-0-dfc0c8827c02@pengutronix.de

Changes in v4:
- fix Makefile sort order
- add touchscreen fallback compatible
- fix lvds_bridge comment
- Link to v3: https://patch.msgid.link/20260701-v7-0-topic-imx8mp-skov-dts-jutouch-7inch-v3-0-d74f7e3f8293@pengutronix.de

Changes in v3:
- rebase to v7.2-rc1
- Link to v2: https://patch.msgid.link/20260427-v7-0-topic-imx8mp-skov-dts-jutouch-7inch-v2-0-e2b79fc24391@pengutronix.de

Changes in v2:
- rebase to v7.1-rc1
- Link to v1: https://patch.msgid.link/20260325-v7-0-topic-imx8mp-skov-dts-jutouch-7inch-v1-0-10255d236439@pengutronix.de

To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Frank Li <Frank.Li@nxp.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
To: Pengutronix Kernel Team <kernel@pengutronix.de>
To: Fabio Estevam <festevam@gmail.com>
To: Shawn Guo <shawnguo@kernel.org>
Cc: Søren Andersen <san@skov.dk>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: imx@lists.linux.dev
Cc: linux-arm-kernel@lists.infradead.org

---
Steffen Trumtrar (4):
      arm64: dts: freescale: imx8mp: skov: fix sort order
      dt-bindings: arm: fsl: add compatibles for Skov i.MX8MP boards
      arm64: dts: imx8mp-skov-revc: convert to overlays
      arm64: dts: imx8mp-skov: support new 7inch panel board

 Documentation/devicetree/bindings/arm/fsl.yaml     |  2 +
 arch/arm64/boot/dts/freescale/Makefile             | 10 ++-
 .../imx8mp-skov-revc-jutouch-jt070tm041.dtso       | 38 ++++++++++
 .../imx8mp-skov-revc-jutouch-jt101tm023.dtso       | 38 ++++++++++
 .../dts/freescale/imx8mp-skov-revc-tian-g07017.dts | 81 ----------------------
 .../freescale/imx8mp-skov-revc-tian-g07017.dtso    | 40 +++++++++++
 ...h-jt101tm023.dts => imx8mp-skov-revc-touch.dts} | 26 +++----
 7 files changed, 135 insertions(+), 100 deletions(-)
---
base-commit: 7f47e8eafbf55a2ad0697e5d28f5e6cff2fa42f9
change-id: 20260325-v7-0-topic-imx8mp-skov-dts-jutouch-7inch-3dbcb450a39c

Best regards,
--  
Steffen Trumtrar <s.trumtrar@pengutronix.de>

[PATCH v10 1/4] arm64: dts: freescale: imx8mp: skov: fix sort order

[Steffen Trumtrar]

The imx8mp-skov-revc-jutouch should be alphabetically before the
imx8mp-skov-revc-tian variant.

Sort the entries in the correct order.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 arch/arm64/boot/dts/freescale/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index a80cccf34eb56..475e1ad9116e1 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -707,8 +707,8 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-bd500.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-hdmi.dtb
-dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-tian-g07017.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-jutouch-jt101tm023.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-tian-g07017.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-toradex-smarc-dev.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314.dtb

-- 
2.51.0

[PATCH v10 2/4] dt-bindings: arm: fsl: add compatibles for Skov i.MX8MP boards

[Steffen Trumtrar]

Add a compatible for all revC-based Skov boards with a touch panel.

Also, in preparation for adding a new device tree variant with a
different 7" panel than the already mainline ones, also describe that DT
compatible in the binding.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index cb99fb74805bc..3ff8cd69b0830 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1153,8 +1153,10 @@ properties:
               - skov,imx8mp-skov-revb-mi1010ait-1cp1 # SKOV i.MX8MP climate control with 10.1" panel
               - skov,imx8mp-skov-revc-hdmi # SKOV i.MX8MP climate control without panel
               - skov,imx8mp-skov-revc-bd500 # SKOV i.MX8MP climate control with LED frontplate
+              - skov,imx8mp-skov-revc-jutouch-jt070tm041 # SKOV i.MX8MP climate control with 7" JuTouch panel
               - skov,imx8mp-skov-revc-jutouch-jt101tm023 # SKOV i.MX8MP climate control with 10" JuTouch panel
               - skov,imx8mp-skov-revc-tian-g07017 # SKOV i.MX8MP climate control with 7" panel
+              - skov,imx8mp-skov-revc-touch # SKOV i.MX8MP climate control revision C with touch panel
               - ultratronik,imx8mp-ultra-mach-sbc # Ultratronik SBC i.MX8MP based board
               - ysoft,imx8mp-iota2-lumpy  # Y Soft i.MX8MP IOTA2 Lumpy Board
           - const: fsl,imx8mp

-- 
2.51.0

[PATCH v10 3/4] arm64: dts: imx8mp-skov-revc: convert to overlays

[Steffen Trumtrar]

The i.MX8MP Skov RevC jutouch 10" and Tian 7" variants are pretty
similar, apart from the Display and touch controller.

Move the common bindings to imx8mp-skov-revc-touch.dts and convert both
variants to use overlays applied on this base version.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
 arch/arm64/boot/dts/freescale/Makefile             |  5 ++
 .../imx8mp-skov-revc-jutouch-jt101tm023.dtso       | 38 ++++++++++
 .../dts/freescale/imx8mp-skov-revc-tian-g07017.dts | 81 ----------------------
 .../freescale/imx8mp-skov-revc-tian-g07017.dtso    | 40 +++++++++++
 ...h-jt101tm023.dts => imx8mp-skov-revc-touch.dts} | 26 +++----
 5 files changed, 91 insertions(+), 99 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 475e1ad9116e1..7c1b61249778e 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -707,6 +707,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-bd500.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-hdmi.dtb
+
+imx8mp-skov-revc-jutouch-jt101tm023-dtbs += imx8mp-skov-revc-touch.dtb \
+	imx8mp-skov-revc-jutouch-jt101tm023.dtbo
+imx8mp-skov-revc-tian-g07017-dtbs += imx8mp-skov-revc-touch.dtb \
+	imx8mp-skov-revc-tian-g07017.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-jutouch-jt101tm023.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-tian-g07017.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-toradex-smarc-dev.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-jutouch-jt101tm023.dtso b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-jutouch-jt101tm023.dtso
new file mode 100644
index 0000000000000..33ddd08a7adb5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-jutouch-jt101tm023.dtso
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&{/} {
+	model = "SKOV IMX8MP CPU revC - JuTouch JT101TM023";
+	compatible = "skov,imx8mp-skov-revc-jutouch-jt101tm023", "fsl,imx8mp";
+};
+
+&{/panel} {
+	compatible = "jutouch,jt101tm023";
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@2a {
+		compatible = "eeti,exc81w32", "eeti,exc80h84";
+		reg = <0x2a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupts-extended = <&gpio4 28 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+		vdd-supply = <&reg_vdd_3v3>;
+	};
+};
+
+&lvds_bridge {
+	/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 7 */
+	assigned-clock-rates = <0>, <506800000>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-tian-g07017.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-tian-g07017.dts
deleted file mode 100644
index 9a562c011f2c2..0000000000000
--- a/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-tian-g07017.dts
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-
-/dts-v1/;
-
-#include "imx8mp-skov-reva.dtsi"
-
-/ {
-	model = "SKOV IMX8MP CPU revC - TIAN G07017";
-	compatible = "skov,imx8mp-skov-revc-tian-g07017", "fsl,imx8mp";
-
-	panel {
-		compatible = "topland,tian-g07017-01";
-		backlight = <&backlight>;
-		power-supply = <&reg_tft_vcom>;
-
-		port {
-			in_lvds0: endpoint {
-				remote-endpoint = <&ldb_lvds_ch0>;
-			};
-		};
-	};
-};
-
-&backlight {
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5506";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touchscreen>;
-		interrupts-extended = <&gpio4 28 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
-		touchscreen-size-x = <1024>;
-		touchscreen-size-y = <600>;
-		vcc-supply = <&reg_vdd_3v3>;
-		iovcc-supply = <&reg_vdd_3v3>;
-		wakeup-source;
-	};
-};
-
-&lcdif2 {
-	status = "okay";
-};
-
-&lvds_bridge {
-	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
-				 <&clk IMX8MP_VIDEO_PLL1>;
-	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
-	/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 2 * 7 */
-	assigned-clock-rates = <0>, <358400000>;
-	status = "okay";
-
-	ports {
-		port@1 {
-			ldb_lvds_ch0: endpoint {
-				remote-endpoint = <&in_lvds0>;
-			};
-		};
-	};
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&reg_tft_vcom {
-	regulator-min-microvolt = <3160000>;
-	regulator-max-microvolt = <3160000>;
-	voltage-table = <3160000 73>;
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-tian-g07017.dtso b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-tian-g07017.dtso
new file mode 100644
index 0000000000000..b9781a418e4d5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-tian-g07017.dtso
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&{/} {
+	model = "SKOV IMX8MP CPU revC - TIAN G07017";
+	compatible = "skov,imx8mp-skov-revc-tian-g07017", "fsl,imx8mp";
+};
+
+&{/panel} {
+	compatible = "topland,tian-g07017-01";
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5506";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupts-extended = <&gpio4 28 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+		vcc-supply = <&reg_vdd_3v3>;
+		iovcc-supply = <&reg_vdd_3v3>;
+		wakeup-source;
+	};
+};
+
+&lvds_bridge {
+	/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 2 * 7 */
+	assigned-clock-rates = <0>, <358400000>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-jutouch-jt101tm023.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-touch.dts
similarity index 56%
rename from arch/arm64/boot/dts/freescale/imx8mp-skov-revc-jutouch-jt101tm023.dts
rename to arch/arm64/boot/dts/freescale/imx8mp-skov-revc-touch.dts
index 3e320d6dea3a2..c830f3ca8cb45 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-jutouch-jt101tm023.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-touch.dts
@@ -5,11 +5,10 @@
 #include "imx8mp-skov-reva.dtsi"
 
 / {
-	model = "SKOV IMX8MP CPU revC - JuTouch JT101TM023";
-	compatible = "skov,imx8mp-skov-revc-jutouch-jt101tm023", "fsl,imx8mp";
+	model = "SKOV IMX8MP CPU revC";
+	compatible = "skov,imx8mp-skov-revc-touch", "fsl,imx8mp";
 
 	panel {
-		compatible = "jutouch,jt101tm023";
 		backlight = <&backlight>;
 		power-supply = <&reg_tft_vcom>;
 
@@ -28,18 +27,6 @@ &backlight {
 &i2c2 {
 	clock-frequency = <100000>;
 	status = "okay";
-
-	touchscreen@2a {
-		compatible = "eeti,exc81w32", "eeti,exc80h84";
-		reg = <0x2a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touchscreen>;
-		interrupts-extended = <&gpio4 28 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
-		touchscreen-size-x = <1280>;
-		touchscreen-size-y = <800>;
-		vdd-supply = <&reg_vdd_3v3>;
-	};
 };
 
 &lcdif2 {
@@ -48,14 +35,17 @@ &lcdif2 {
 
 &lvds_bridge {
 	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
-				 <&clk IMX8MP_VIDEO_PLL1>;
+			  <&clk IMX8MP_VIDEO_PLL1>;
 	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
-	/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 7 */
-	assigned-clock-rates = <0>, <506800000>;
 	status = "okay";
 
 	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		port@1 {
+			reg = <1>;
+
 			ldb_lvds_ch0: endpoint {
 				remote-endpoint = <&in_lvds0>;
 			};

-- 
2.51.0

[PATCH v10 4/4] arm64: dts: imx8mp-skov: support new 7inch panel board

[Steffen Trumtrar]

This board is similar to the already upstream
imx8mp-skov-revc-jutouch-jt101tm023 but uses a different 7" panel.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
 arch/arm64/boot/dts/freescale/Makefile             |  3 ++
 .../imx8mp-skov-revc-jutouch-jt070tm041.dtso       | 38 ++++++++++++++++++++++
 2 files changed, 41 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 7c1b61249778e..d06f50bfc2043 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -708,10 +708,13 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-bd500.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-hdmi.dtb
 
+imx8mp-skov-revc-jutouch-jt070tm041-dtbs += imx8mp-skov-revc-touch.dtb \
+	imx8mp-skov-revc-jutouch-jt070tm041.dtbo
 imx8mp-skov-revc-jutouch-jt101tm023-dtbs += imx8mp-skov-revc-touch.dtb \
 	imx8mp-skov-revc-jutouch-jt101tm023.dtbo
 imx8mp-skov-revc-tian-g07017-dtbs += imx8mp-skov-revc-touch.dtb \
 	imx8mp-skov-revc-tian-g07017.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-jutouch-jt070tm041.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-jutouch-jt101tm023.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-tian-g07017.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-toradex-smarc-dev.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-jutouch-jt070tm041.dtso b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-jutouch-jt070tm041.dtso
new file mode 100644
index 0000000000000..7b3535f47f3ed
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-jutouch-jt070tm041.dtso
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	model = "SKOV IMX8MP CPU revC - JuTouch JT070TM041";
+	compatible = "skov,imx8mp-skov-revc-jutouch-jt070tm041", "fsl,imx8mp";
+};
+
+&{/panel} {
+	compatible = "jutouch,jt070tm041";
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@2a {
+		compatible = "eeti,exc81w32", "eeti,exc80h84";
+		reg = <0x2a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupts-extended = <&gpio4 28 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+		vdd-supply = <&reg_vdd_3v3>;
+	};
+};
+
+&lvds_bridge {
+	/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 7 */
+	assigned-clock-rates = <0>, <358400000>;
+};

-- 
2.51.0

Re: [PATCH v10 3/4] arm64: dts: imx8mp-skov-revc: convert to overlays

[Frank Li]

On Mon, Oct 12, 2026 at 08:30:32AM +0200, Steffen Trumtrar wrote:

subject:

arm64: dts: imx8mp-skov-revc: convert jutouch and tian to overlays

or something,  convert "what" to overlays.

> The i.MX8MP Skov RevC jutouch 10" and Tian 7" variants are pretty
> similar, apart from the Display and touch controller.
>
> Move the common bindings to imx8mp-skov-revc-touch.dts and convert both
> variants to use overlays applied on this base version.
>
> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> ---
...

>
>  &lcdif2 {
> @@ -48,14 +35,17 @@ &lcdif2 {
>
>  &lvds_bridge {
>  	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
> -				 <&clk IMX8MP_VIDEO_PLL1>;
> +			  <&clk IMX8MP_VIDEO_PLL1>;

don't mix code style change in this patch.

Frnak
>  	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
> -	/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 7 */
> -	assigned-clock-rates = <0>, <506800000>;
>  	status = "okay";
>
>  	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
>  		port@1 {
> +			reg = <1>;
> +
>  			ldb_lvds_ch0: endpoint {
>  				remote-endpoint = <&in_lvds0>;
>  			};
>
> --
> 2.51.0
>
>