* [PATCH v2] signal: respect the blocked mask in dequeue_synchronous_signal()
@ 2026-10-22 6:10 Avi Weiss
2026-10-22 11:58 ` Oleg Nesterov
0 siblings, 1 reply; 2+ messages in thread
From: Avi Weiss @ 2026-10-22 6:10 UTC (permalink / raw)
To: Oleg Nesterov
Cc: Andrew Morton, Christian Brauner, Eric W . Biederman,
linux-kernel, Avi Weiss
dequeue_synchronous_signal() uses the signal number and a positive
si_code to identify synchronous signals. An ordinarily queued
signal can also match this heuristic.
The initial pending-mask check only establishes that an unblocked
signal in SYNCHRONOUS_MASK is pending. The queue scan can select a
different blocked signal matching the heuristic and deliver it
despite its mask.
For example, a thread can block SIGSEGV and queue it to itself with
a positive si_code using rt_tgsigqueueinfo(). An unblocked SIGTRAP
then allows the scan to select the blocked SIGSEGV.
Check each candidate against the blocked mask. Genuine forced faults
are unblocked by force_sig_info_to_task() when necessary.
Fixes: 7146db3317c6 ("signal: Better detection of synchronous signals")
Signed-off-by: Avi Weiss <thnkslprpt@gmail.com>
---
Reproduced by blocking SIGSEGV, queuing a positive-code SIGSEGV
with rt_tgsigqueueinfo(), then triggering an unblocked SIGTRAP.
Without the fix, SIGSEGV was delivered while still blocked.
Tested unpatched and patched kernels under QEMU on UP x86-64, with
test processes running as UID/GID 1000. The unpatched kernel passed
21/38 checks and the patched kernel passed 38/38.
These results are from the original patch base. The rebased v2 has
not been runtime-tested separately.
Changes in v2:
- Restore the original queue-scan comment following Eric's feedback.
- Clarify that ordinarily queued signals can match the
synchronous-signal heuristic.
- Rebase onto current mainline.
kernel/signal.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/kernel/signal.c b/kernel/signal.c
index cb6ec7054eee..7e690f4fb5bc 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -689,7 +689,8 @@ static int dequeue_synchronous_signal(kernel_siginfo_t *info)
list_for_each_entry(q, &pending->list, list) {
/* Synchronous signals have a positive si_code */
if ((q->info.si_code > SI_USER) &&
- (sigmask(q->info.si_signo) & SYNCHRONOUS_MASK)) {
+ (sigmask(q->info.si_signo) & SYNCHRONOUS_MASK) &&
+ !sigismember(&tsk->blocked, q->info.si_signo)) {
sync = q;
goto next;
}
base-commit: 4403278e4ea2f654f8130a5c03eb8b4516a0f201
--
2.43.0
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [PATCH v2] signal: respect the blocked mask in dequeue_synchronous_signal()
2026-10-22 6:10 [PATCH v2] signal: respect the blocked mask in dequeue_synchronous_signal() Avi Weiss
@ 2026-10-22 11:58 ` Oleg Nesterov
0 siblings, 0 replies; 2+ messages in thread
From: Oleg Nesterov @ 2026-10-22 11:58 UTC (permalink / raw)
To: Avi Weiss
Cc: Andrew Morton, Christian Brauner, Eric W . Biederman, linux-kernel
On 10/22, Avi Weiss wrote:
>
> Changes in v2:
> - Restore the original queue-scan comment following Eric's feedback.
> - Clarify that ordinarily queued signals can match the
> synchronous-signal heuristic.
> - Rebase onto current mainline.
>
> kernel/signal.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/kernel/signal.c b/kernel/signal.c
> index cb6ec7054eee..7e690f4fb5bc 100644
> --- a/kernel/signal.c
> +++ b/kernel/signal.c
> @@ -689,7 +689,8 @@ static int dequeue_synchronous_signal(kernel_siginfo_t *info)
> list_for_each_entry(q, &pending->list, list) {
> /* Synchronous signals have a positive si_code */
> if ((q->info.si_code > SI_USER) &&
> - (sigmask(q->info.si_signo) & SYNCHRONOUS_MASK)) {
> + (sigmask(q->info.si_signo) & SYNCHRONOUS_MASK) &&
> + !sigismember(&tsk->blocked, q->info.si_signo)) {
Still:
CC: stable@vger.kernel.org
Acked-by: Oleg Nesterov <oleg@redhat.com>
I was going to send another cleanup on top of this fix. Can't do this today,
but let me explain... It is a bit ugly to check si_signo twice. And afaics we
have another problem. sys_rt_sigqueueinfo() allows to send a SI_FROMKERNEL RT
signal to itself. In this case sigmask(q->info.si_signo) leads to UB on 32-bit.
I'll recheck, write the changelog, and send something like below tomorrow.
perhaps rt_sigmask() makes more sense than sigset_t...
Oleg.
From 6f7441ff08d7b88b96ac6787b40634e8c173003c Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@redhat.com>
Date: Thu, 22 Oct 2026 13:43:01 +0200
Subject: [PATCH] signal: cleanup the .si_signo checks in dequeue_synchronous_signal()
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
---
kernel/signal.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/kernel/signal.c b/kernel/signal.c
index 7386b9552dc3..9cfd4d03cad4 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -676,21 +676,24 @@ static int dequeue_synchronous_signal(kernel_siginfo_t *info)
struct task_struct *tsk = current;
struct sigpending *pending = &tsk->pending;
struct sigqueue *q, *sync = NULL;
+ unsigned long mask;
+ sigset_t xxx;
/*
* Might a synchronous signal be in the queue?
*/
- if (!((pending->signal.sig[0] & ~tsk->blocked.sig[0]) & SYNCHRONOUS_MASK))
+ mask = (pending->signal.sig[0] & ~tsk->blocked.sig[0]) & SYNCHRONOUS_MASK;
+ if (!mask)
return 0;
+ siginitset(&xxx, mask);
/*
* Return the first synchronous signal in the queue.
*/
list_for_each_entry(q, &pending->list, list) {
/* Synchronous signals have a positive si_code */
- if ((q->info.si_code > SI_USER) &&
- (sigmask(q->info.si_signo) & SYNCHRONOUS_MASK) &&
- !sigismember(&tsk->blocked, q->info.si_signo)) {
+ if (SI_FROMKERNEL(&q->info) &&
+ sigismember(&xxx, q->info.si_signo)) {
sync = q;
goto next;
}
--
2.55.0
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-10-22 11:58 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-10-22 6:10 [PATCH v2] signal: respect the blocked mask in dequeue_synchronous_signal() Avi Weiss
2026-10-22 11:58 ` Oleg Nesterov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®