From: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
To: Arnd Bergmann <arnd@kernel.org>
Cc: linux-sh@vger.kernel.org, Rich Felker <dalias@libc.org>,
Yoshinori Sato <ysato@users.sourceforge.jp>,
Geert Uytterhoeven <geert+renesas@glider.be>,
linux-kernel@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>
Subject: Re: [PATCH 4/4] sh: machvec: remove custom ioport_{un,}map()
Date: Fri, 08 Sep 2023 12:23:23 +0200 [thread overview]
Message-ID: <b07d08b4c120ffdbadba6fd341aca5c63ff3275e.camel@physik.fu-berlin.de> (raw)
In-Reply-To: <20230802184849.1019466-4-arnd@kernel.org>
On Wed, 2023-08-02 at 20:48 +0200, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> These functions were only used on the microdev
> board that is now gone, so remove them to simplify
> the ioport handling.
>
> This could be further simplified to use the generic
> I/O port accessors now.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> arch/sh/include/asm/io.h | 4 ++--
> arch/sh/include/asm/machvec.h | 5 -----
> arch/sh/kernel/ioport.c | 13 +------------
> 3 files changed, 3 insertions(+), 19 deletions(-)
>
> diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
> index f2f38e9d489ac..ac521f287fa59 100644
> --- a/arch/sh/include/asm/io.h
> +++ b/arch/sh/include/asm/io.h
> @@ -181,7 +181,7 @@ static inline void pfx##out##bwlq##p(type val, unsigned long port) \
> { \
> volatile type *__addr; \
> \
> - __addr = __ioport_map(port, sizeof(type)); \
> + __addr = (void __iomem *)sh_io_port_base + port; \
> *__addr = val; \
> slow; \
> } \
> @@ -191,7 +191,7 @@ static inline type pfx##in##bwlq##p(unsigned long port) \
> volatile type *__addr; \
> type __val; \
> \
> - __addr = __ioport_map(port, sizeof(type)); \
> + __addr = (void __iomem *)sh_io_port_base + port; \
> __val = *__addr; \
> slow; \
> \
> diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h
> index 2b4b085e8f219..4e5314b921f19 100644
> --- a/arch/sh/include/asm/machvec.h
> +++ b/arch/sh/include/asm/machvec.h
> @@ -19,11 +19,6 @@ struct sh_machine_vector {
> int (*mv_irq_demux)(int irq);
> void (*mv_init_irq)(void);
>
> -#ifdef CONFIG_HAS_IOPORT_MAP
> - void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
> - void (*mv_ioport_unmap)(void __iomem *);
> -#endif
> -
> int (*mv_clk_init)(void);
> int (*mv_mode_pins)(void);
>
> diff --git a/arch/sh/kernel/ioport.c b/arch/sh/kernel/ioport.c
> index f39446a658bdb..c8aff8a20164d 100644
> --- a/arch/sh/kernel/ioport.c
> +++ b/arch/sh/kernel/ioport.c
> @@ -12,15 +12,6 @@
> unsigned long sh_io_port_base __read_mostly = -1;
> EXPORT_SYMBOL(sh_io_port_base);
>
> -void __iomem *__ioport_map(unsigned long addr, unsigned int size)
> -{
> - if (sh_mv.mv_ioport_map)
> - return sh_mv.mv_ioport_map(addr, size);
> -
> - return (void __iomem *)(addr + sh_io_port_base);
> -}
> -EXPORT_SYMBOL(__ioport_map);
> -
> void __iomem *ioport_map(unsigned long port, unsigned int nr)
> {
> void __iomem *ret;
> @@ -29,13 +20,11 @@ void __iomem *ioport_map(unsigned long port, unsigned int nr)
> if (ret)
> return ret;
>
> - return __ioport_map(port, nr);
> + return (void __iomem *)(port + sh_io_port_base);
> }
> EXPORT_SYMBOL(ioport_map);
>
> void ioport_unmap(void __iomem *addr)
> {
> - if (sh_mv.mv_ioport_unmap)
> - sh_mv.mv_ioport_unmap(addr);
> }
> EXPORT_SYMBOL(ioport_unmap);
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
next prev parent reply other threads:[~2023-09-08 10:33 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-02 18:48 [PATCH 1/4] sh: remove stale microdev board Arnd Bergmann
2023-08-02 18:48 ` [PATCH 2/4] sh: remove unused sh4-202 support Arnd Bergmann
2023-09-08 10:00 ` John Paul Adrian Glaubitz
2023-08-02 18:48 ` [PATCH 3/4] sh: remove superhyway bus support Arnd Bergmann
2023-08-03 7:58 ` D. Jeff Dionne
2023-08-03 8:44 ` John Paul Adrian Glaubitz
2023-08-03 9:19 ` Arnd Bergmann
2023-08-03 9:36 ` John Paul Adrian Glaubitz
2023-08-03 9:58 ` Arnd Bergmann
2023-09-08 10:02 ` John Paul Adrian Glaubitz
2023-08-02 18:48 ` [PATCH 4/4] sh: machvec: remove custom ioport_{un,}map() Arnd Bergmann
2023-09-08 10:10 ` John Paul Adrian Glaubitz
2023-09-08 10:20 ` Geert Uytterhoeven
2023-09-08 10:21 ` John Paul Adrian Glaubitz
2023-09-08 10:23 ` John Paul Adrian Glaubitz [this message]
2023-09-13 12:32 ` Geert Uytterhoeven
2023-09-13 14:08 ` Arnd Bergmann
2023-09-13 14:13 ` Geert Uytterhoeven
2023-09-13 14:30 ` Arnd Bergmann
2023-09-14 6:23 ` John Paul Adrian Glaubitz
2023-09-14 15:56 ` Arnd Bergmann
2023-09-15 15:41 ` Geert Uytterhoeven
2023-09-15 15:49 ` Arnd Bergmann
2023-09-21 7:45 ` John Paul Adrian Glaubitz
2023-09-21 8:52 ` Geert Uytterhoeven
2023-09-25 7:08 ` Yoshinori Sato
2023-09-25 7:36 ` Arnd Bergmann
2023-09-26 22:15 ` John Paul Adrian Glaubitz
2023-09-08 9:59 ` [PATCH 1/4] sh: remove stale microdev board John Paul Adrian Glaubitz
2023-09-09 22:06 ` John Paul Adrian Glaubitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b07d08b4c120ffdbadba6fd341aca5c63ff3275e.camel@physik.fu-berlin.de \
--to=glaubitz@physik.fu-berlin.de \
--cc=arnd@arndb.de \
--cc=arnd@kernel.org \
--cc=dalias@libc.org \
--cc=geert+renesas@glider.be \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=ysato@users.sourceforge.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®