[PATCH v4 0/2] Enable audio on lemans-evk board

[PATCH v4 0/2] Enable audio on lemans-evk board

[Mohammad Rafi Shaik]

Enable audio support on lemans-evk board.

Introduce HS (High-Speed) MI2S pin control support.
The I2S max98357a speaker amplifier is connected via HS0 and I2S
microphones utilize the HS2 interface.

DT-Binding link for sound compatible:
https://lore.kernel.org/linux-sound/20250519083244.4070689-3-mohammad.rafi.shaik@oss.qualcomm.com/

changes in [v4]:
	- Nodes sorted in the proper order reported by Konrad Dybcio.
	- Since the base SoC device tree Renamed from sa8775p.dtsi to lemans.dtsi, and
	  the board-specific device tree from qcs9075-iq-9075-evk.dts to lemans-evk.dts,
	  moved audio support device tree nodes to the new lemans device tree.
	  Renamed device tree reference Link: https://lore.kernel.org/all/20250803110113.401927-1-wasim.nazir@oss.qualcomm.com/
	- Link to V3 : https://lore.kernel.org/linux-arm-msm/20250724155632.236675-1-mohammad.rafi.shaik@oss.qualcomm.com/

changes in [v3]:
	- Updated link-name from HS0 MI2S to HS1 MI2S and sorted nodes in order.
	- Link to V2 : https://lore.kernel.org/linux-arm-msm/20250616070405.4113564-1-mohammad.rafi.shaik@oss.qualcomm.com/

changes in [v2]:
	- Updated commit message as suggested by Dmitry Baryshkov.
	- Link to V1 : https://lore.kernel.org/linux-arm-msm/20250525155356.2081362-1-mohammad.rafi.shaik@oss.qualcomm.com/

Mohammad Rafi Shaik (2):
  arm64: dts: qcom: lemans: Add gpr node
  arm64: dts: qcom: lemans-evk: Add sound card

 arch/arm64/boot/dts/qcom/lemans-evk.dts | 52 ++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/lemans.dtsi    | 54 +++++++++++++++++++++++++
 2 files changed, 106 insertions(+)


base-commit: 0f4c93f7eb861acab537dbe94441817a270537bf
-- 
2.34.1

[PATCH v4 1/2] arm64: dts: qcom: lemans: Add gpr node

[Mohammad Rafi Shaik]

Add GPR(Generic Pack router) node along with
APM(Audio Process Manager) and PRM(Proxy resource
Manager) audio services.

Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/lemans.dtsi | 40 ++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index 64f5378c6a47..7026f25877c8 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -18,6 +18,7 @@
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
 / {
@@ -6596,6 +6597,45 @@ compute-cb@5 {
 						dma-coherent;
 					};
 				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x3001 0x0>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
 			};
 		};
 	};
-- 
2.34.1

[PATCH v4 2/2] arm64: dts: qcom: lemans-evk: Add sound card

[Mohammad Rafi Shaik]

Add the sound card node with tested playback over max98357a
I2S speakers amplifier and I2S mic.

Introduce HS (High-Speed) MI2S pin control support.
The I2S max98357a speaker amplifier is connected via HS0 and I2S
microphones utilize the HS2 interface.

Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/lemans-evk.dts | 52 +++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/lemans.dtsi    | 14 +++++++
 2 files changed, 66 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
index 669ac52f4cf6..d67a9307cc75 100644
--- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
+++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "lemans.dtsi"
@@ -22,6 +23,57 @@ aliases {
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	dmic: audio-codec-0 {
+		compatible = "dmic-codec";
+		#sound-dai-cells = <0>;
+		num-channels = <1>;
+	};
+
+	max98357a: audio-codec-1 {
+		compatible = "maxim,max98357a";
+		#sound-dai-cells = <0>;
+	};
+
+	sound {
+		compatible = "qcom,qcs9100-sndcard";
+		model = "LEMANS-EVK";
+
+		pinctrl-0 = <&hs0_mi2s_active>, <&hs2_mi2s_active>;
+		pinctrl-names = "default";
+
+		hs0-mi2s-playback-dai-link {
+			link-name = "HS0 MI2S Playback";
+
+			codec {
+				sound-dai = <&max98357a>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		hs2-mi2s-capture-dai-link {
+			link-name = "HS2 MI2S Capture";
+
+			codec {
+				sound-dai = <&dmic>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai TERTIARY_MI2S_TX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index 7026f25877c8..d73037d6d97a 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -5005,6 +5005,20 @@ tlmm: pinctrl@f000000 {
 			gpio-ranges = <&tlmm 0 0 149>;
 			wakeup-parent = <&pdc>;
 
+			hs0_mi2s_active: hs0-mi2s-active-state {
+				pins = "gpio114", "gpio115", "gpio116", "gpio117";
+				function = "hs0_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			hs2_mi2s_active: hs2-mi2s-active-state {
+				pins = "gpio122", "gpio123", "gpio124", "gpio125";
+				function = "hs2_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
 			qup_i2c0_default: qup-i2c0-state {
 				pins = "gpio20", "gpio21";
 				function = "qup0_se0";
-- 
2.34.1

Re: [PATCH v4 2/2] arm64: dts: qcom: lemans-evk: Add sound card

[Konrad Dybcio]

On 8/22/25 3:19 PM, Mohammad Rafi Shaik wrote:
> Add the sound card node with tested playback over max98357a
> I2S speakers amplifier and I2S mic.
> 
> Introduce HS (High-Speed) MI2S pin control support.
> The I2S max98357a speaker amplifier is connected via HS0 and I2S
> microphones utilize the HS2 interface.
> 
> Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/lemans-evk.dts | 52 +++++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/lemans.dtsi    | 14 +++++++
>  2 files changed, 66 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
> index 669ac52f4cf6..d67a9307cc75 100644
> --- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
> +++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
> @@ -6,6 +6,7 @@
>  /dts-v1/;
>  
>  #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/sound/qcom,q6afe.h>
>  #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>  
>  #include "lemans.dtsi"
> @@ -22,6 +23,57 @@ aliases {
>  	chosen {
>  		stdout-path = "serial0:115200n8";
>  	};
> +
> +	dmic: audio-codec-0 {
> +		compatible = "dmic-codec";
> +		#sound-dai-cells = <0>;
> +		num-channels = <1>;
> +	};
> +
> +	max98357a: audio-codec-1 {
> +		compatible = "maxim,max98357a";

In case anyone's interested, this the SD_MODE pin is connected to the
power supply (i.e. it's always on)

Konrad

Re: [PATCH v4 2/2] arm64: dts: qcom: lemans-evk: Add sound card

[Konrad Dybcio]

On 8/22/25 3:19 PM, Mohammad Rafi Shaik wrote:
> Add the sound card node with tested playback over max98357a
> I2S speakers amplifier and I2S mic.
> 
> Introduce HS (High-Speed) MI2S pin control support.
> The I2S max98357a speaker amplifier is connected via HS0 and I2S
> microphones utilize the HS2 interface.
> 
> Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH v4 0/2] Enable audio on lemans-evk board

[Bjorn Andersson]

On Fri, 22 Aug 2025 18:49:00 +0530, Mohammad Rafi Shaik wrote:
> Enable audio support on lemans-evk board.
> 
> Introduce HS (High-Speed) MI2S pin control support.
> The I2S max98357a speaker amplifier is connected via HS0 and I2S
> microphones utilize the HS2 interface.
> 
> DT-Binding link for sound compatible:
> https://lore.kernel.org/linux-sound/20250519083244.4070689-3-mohammad.rafi.shaik@oss.qualcomm.com/
> 
> [...]

Applied, thanks!

[1/2] arm64: dts: qcom: lemans: Add gpr node
      commit: 3f2d6cbbf4c46fbb9e9aa6fa25a70b0003471b26
[2/2] arm64: dts: qcom: lemans-evk: Add sound card
      commit: 473a19211c4dc762e6ecab9c3e6583afd3200817

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>