Re: [PATCH v1 0/2] serial: 8250_pci: Split Pericom driver

[Jay Dolan <jay.dolan@accesio.com>]

On 11/17/21 6:57 AM, Andy Shevchenko wrote:
> Split Pericom driver to a separate module.
> While at it, re-enable high baud rates.
> 
> Jay, can you, please, test this on as many hardware as you have?
> 
> The series depends on the fix-series: https://lore.kernel.org/linux-serial/20211117145502.43645-1-andriy.shevchenko@linux.intel.com/T/#u
> 
> Andy Shevchenko (1):
>    serial: 8250_pci: Split out Pericom driver
> 
> Jay Dolan (1):
>    serial: 8250_pericom: Re-enable higher baud rates
> 
>   drivers/tty/serial/8250/8250_pci.c     | 405 +------------------------
>   drivers/tty/serial/8250/8250_pericom.c | 217 +++++++++++++
>   drivers/tty/serial/8250/Kconfig        |   8 +
>   drivers/tty/serial/8250/Makefile       |   1 +
>   4 files changed, 231 insertions(+), 400 deletions(-)
>   create mode 100644 drivers/tty/serial/8250/8250_pericom.c
> 

I have my current state here: 
https://github.com/accesio/linux/blob/split-pericom-driver/drivers/tty/serial/8250/8250_pericom.c

* Change port type to UPIO_PORT
* Add in pericom_do_startup() because the UPF_MAGIC_MULTIPLIER doesn't 
stick.

When I'm testing baud rates greater than baud_base I'm seeing strange 
things on the scope. Maybe I'm just tired, and it's human error. I 
should be able to get back to it and get it done on Saturday.