Re: [PATCH 02/17] net: stmmac: Remove the bus_setup function pointer

[Giuseppe CAVALLARO <peppe.cavallaro@st.com>]

On 1/31/2017 10:11 AM, Corentin Labbe wrote:
> The bus_setup function pointer is not used at all, this patch remove it.

indeed this was used and documented on some previous kernels where some
ST40/SH4 platforms (w/o DT).

It's ok to remove it in the new MAC generation; I do not think that
ST will re-use it on new development.

Peppe

>
> Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> ---
>  drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 ----
>  include/linux/stmmac.h                            | 1 -
>  2 files changed, 5 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index e3f6389..bf2d8e6 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -1671,10 +1671,6 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
>  	/* Copy the MAC addr into the HW  */
>  	priv->hw->mac->set_umac_addr(priv->hw, dev->dev_addr, 0);
>
> -	/* If required, perform hw setup of the bus. */
> -	if (priv->plat->bus_setup)
> -		priv->plat->bus_setup(priv->ioaddr);
> -
>  	/* PS and related bits will be programmed according to the speed */
>  	if (priv->hw->pcs) {
>  		int speed = priv->plat->mac_port_sel_speed;
> diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
> index 266dab9..2d82df9 100644
> --- a/include/linux/stmmac.h
> +++ b/include/linux/stmmac.h
> @@ -135,7 +135,6 @@ struct plat_stmmacenet_data {
>  	int tx_fifo_size;
>  	int rx_fifo_size;
>  	void (*fix_mac_speed)(void *priv, unsigned int speed);
> -	void (*bus_setup)(void __iomem *ioaddr);
>  	int (*init)(struct platform_device *pdev, void *priv);
>  	void (*exit)(struct platform_device *pdev, void *priv);
>  	void *bsp_priv;
>