From: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: <will@kernel.org>, <robin.murphy@arm.com>, <joro@8bytes.org>,
<konrad.dybcio@linaro.org>, <jsnitsel@redhat.com>,
<quic_bjorande@quicinc.com>, <mani@kernel.org>,
<quic_eberman@quicinc.com>, <robdclark@chromium.org>,
<u.kleine-koenig@pengutronix.de>, <robh@kernel.org>,
<vladimir.oltean@nxp.com>, <quic_pkondeti@quicinc.com>,
<quic_molvera@quicinc.com>, <linux-arm-msm@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <iommu@lists.linux.dev>,
<linux-kernel@vger.kernel.org>,
<qipl.kernel.upstream@quicinc.com>
Subject: Re: [PATCH v4 3/5] iommu/arm-smmu: add ACTLR data and support for SM8550
Date: Fri, 15 Dec 2023 17:50:52 +0530 [thread overview]
Message-ID: <c9493c5f-ccf8-4e21-b00c-5fbc2a5f2edb@quicinc.com> (raw)
In-Reply-To: <CAA8EJppcsr1sbeD1fK0nZ+rASABNcetBK3yMvaP7OiA4JPwskw@mail.gmail.com>
On 12/15/2023 4:14 PM, Dmitry Baryshkov wrote:
> On Fri, 15 Dec 2023 at 12:19, Bibek Kumar Patro
> <quic_bibekkum@quicinc.com> wrote:
>>
>> Add ACTLR data table for SM8550 along with support for
>> same including SM8550 specific implementation operations.
>>
>> Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
>> ---
>> drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 89 ++++++++++++++++++++++
>> 1 file changed, 89 insertions(+)
>>
>> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
>> index cb49291f5233..d2006f610243 100644
>> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
>> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
>> @@ -20,6 +20,85 @@ struct actlr_config {
>> u32 actlr;
>> };
>>
>> +/*
>> + * SMMU-500 TRM defines BIT(0) as CMTLB (Enable context caching in the
>> + * macro TLB) and BIT(1) as CPRE (Enable context caching in the prefetch
>> + * buffer). The remaining bits are implementation defined and vary across
>> + * SoCs.
>> + */
>> +
>> +#define PREFETCH_DEFAULT 0
>> +#define PREFETCH_SHALLOW BIT(8)
>> +#define PREFETCH_MODERATE BIT(9)
>> +#define PREFETCH_DEEP (BIT(9) | BIT(8))
>
> I thin the following might be more correct:
>
> #include <linux/bitfield.h>
>
> #define PREFETCH_MASK GENMASK(9, 8)
> #define PREFETCH_DEFAULT FIELD_PREP(PREFETCH_MASK, 0)
> #define PREFETCH_SHALLOW FIELD_PREP(PREFETCH_MASK, 1)
> #define PREFETCH_MODERATE FIELD_PREP(PREFETCH_MASK, 2)
> #define PREFETCH_DEEP FIELD_PREP(PREFETCH_MASK, 3)
>
Ack, thanks for this suggestion. Let me try this out using
GENMASK. Once tested, will take care of this in next version.
Thanks,
Bibek
>> +#define PREFETCH_SWITCH_GFX (BIT(5) | BIT(3))
>> +#define CPRE BIT(1)
>> +#define CMTLB BIT(0)
>> +
>> +static const struct actlr_config sm8550_apps_actlr_cfg[] = {
>> + { 0x18a0, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
>> + { 0x18e0, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
>> + { 0x0800, 0x0020, PREFETCH_DEFAULT | CMTLB },
>> + { 0x1800, 0x00c0, PREFETCH_DEFAULT | CMTLB },
>> + { 0x1820, 0x0000, PREFETCH_DEFAULT | CMTLB },
>> + { 0x1860, 0x0000, PREFETCH_DEFAULT | CMTLB },
>> + { 0x0c01, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x0c02, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x0c03, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x0c04, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x0c05, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x0c06, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x0c07, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x0c08, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x0c09, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x0c0c, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x0c0d, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x0c0e, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x0c0f, 0x0020, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x1961, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x1962, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x1963, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x1964, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x1965, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x1966, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x1967, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x1968, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x1969, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x196c, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x196d, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x196e, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x196f, 0x0000, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x19c1, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x19c2, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x19c3, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x19c4, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x19c5, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x19c6, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x19c7, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x19c8, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x19c9, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x19cc, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x19cd, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x19ce, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x19cf, 0x0010, PREFETCH_DEEP | CPRE | CMTLB },
>> + { 0x1c00, 0x0002, PREFETCH_SHALLOW | CPRE | CMTLB },
>> + { 0x1c01, 0x0000, PREFETCH_DEFAULT | CMTLB },
>> + { 0x1920, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
>> + { 0x1923, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
>> + { 0x1924, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
>> + { 0x1940, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
>> + { 0x1941, 0x0004, PREFETCH_SHALLOW | CPRE | CMTLB },
>> + { 0x1943, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
>> + { 0x1944, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
>> + { 0x1947, 0x0000, PREFETCH_SHALLOW | CPRE | CMTLB },
>> + {},
>> +};
>> +
>> +static const struct actlr_config sm8550_gfx_actlr_cfg[] = {
>> + { 0x0000, 0x03ff, PREFETCH_SWITCH_GFX | PREFETCH_DEEP | CPRE | CMTLB },
>> + {},
>> +};
>> +
>> static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
>> {
>> return container_of(smmu, struct qcom_smmu, smmu);
>> @@ -549,6 +628,15 @@ static const struct qcom_smmu_match_data sdm845_smmu_500_data = {
>> /* Also no debug configuration. */
>> };
>>
>> +
>> +static const struct qcom_smmu_match_data sm8550_smmu_500_impl0_data = {
>> + .impl = &qcom_smmu_500_impl,
>> + .adreno_impl = &qcom_adreno_smmu_500_impl,
>> + .cfg = &qcom_smmu_impl0_cfg,
>> + .actlrcfg = sm8550_apps_actlr_cfg,
>> + .actlrcfg_gfx = sm8550_gfx_actlr_cfg,
>> +};
>> +
>> static const struct qcom_smmu_match_data qcom_smmu_500_impl0_data = {
>> .impl = &qcom_smmu_500_impl,
>> .adreno_impl = &qcom_adreno_smmu_500_impl,
>> @@ -583,6 +671,7 @@ static const struct of_device_id __maybe_unused qcom_smmu_impl_of_match[] = {
>> { .compatible = "qcom,sm8250-smmu-500", .data = &qcom_smmu_500_impl0_data },
>> { .compatible = "qcom,sm8350-smmu-500", .data = &qcom_smmu_500_impl0_data },
>> { .compatible = "qcom,sm8450-smmu-500", .data = &qcom_smmu_500_impl0_data },
>> + { .compatible = "qcom,sm8550-smmu-500", .data = &sm8550_smmu_500_impl0_data },
>> { .compatible = "qcom,smmu-500", .data = &qcom_smmu_500_impl0_data },
>> { }
>> };
>> --
>> 2.17.1
>>
>
>
next prev parent reply other threads:[~2023-12-15 12:21 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-15 10:18 [PATCH v4 0/5] iommu/arm-smmu: introduction of ACTLR implementation for Qualcomm SoCs Bibek Kumar Patro
2023-12-15 10:18 ` [PATCH v4 1/5] iommu/arm-smmu: refactor qcom_smmu structure to include single pointer Bibek Kumar Patro
2023-12-15 10:18 ` [PATCH v4 2/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings Bibek Kumar Patro
2023-12-15 10:18 ` [PATCH v4 3/5] iommu/arm-smmu: add ACTLR data and support for SM8550 Bibek Kumar Patro
2023-12-15 10:44 ` Dmitry Baryshkov
2023-12-15 12:20 ` Bibek Kumar Patro [this message]
2023-12-15 12:54 ` Robin Murphy
2023-12-16 0:03 ` Konrad Dybcio
2023-12-16 16:15 ` Dmitry Baryshkov
2023-12-18 6:13 ` Bibek Kumar Patro
2023-12-18 11:23 ` Bibek Kumar Patro
2023-12-18 14:21 ` Dmitry Baryshkov
2023-12-19 8:24 ` Bibek Kumar Patro
2023-12-19 10:21 ` Dmitry Baryshkov
2023-12-19 10:36 ` Bibek Kumar Patro
2023-12-19 10:44 ` Dmitry Baryshkov
2023-12-19 11:39 ` Bibek Kumar Patro
2023-12-18 6:17 ` Bibek Kumar Patro
2023-12-18 5:36 ` Bibek Kumar Patro
2023-12-15 23:35 ` Konrad Dybcio
2023-12-16 16:16 ` Dmitry Baryshkov
2023-12-18 11:40 ` Bibek Kumar Patro
2023-12-15 10:18 ` [PATCH v4 4/5] iommu/arm-smmu: add ACTLR data and support for SC7280 Bibek Kumar Patro
2023-12-15 10:18 ` [PATCH v4 5/5] iommu/arm-smmu: re-enable context caching in smmu reset operation Bibek Kumar Patro
2023-12-15 23:54 ` Konrad Dybcio
2023-12-18 6:37 ` Bibek Kumar Patro
2023-12-19 13:06 ` Bibek Kumar Patro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c9493c5f-ccf8-4e21-b00c-5fbc2a5f2edb@quicinc.com \
--to=quic_bibekkum@quicinc.com \
--cc=dmitry.baryshkov@linaro.org \
--cc=iommu@lists.linux.dev \
--cc=joro@8bytes.org \
--cc=jsnitsel@redhat.com \
--cc=konrad.dybcio@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mani@kernel.org \
--cc=qipl.kernel.upstream@quicinc.com \
--cc=quic_bjorande@quicinc.com \
--cc=quic_eberman@quicinc.com \
--cc=quic_molvera@quicinc.com \
--cc=quic_pkondeti@quicinc.com \
--cc=robdclark@chromium.org \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=u.kleine-koenig@pengutronix.de \
--cc=vladimir.oltean@nxp.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®