* [PATCH 1/7] dt-bindings: power: st: add STM32MP PM domain binding
2026-11-04 13:55 [PATCH 0/7] arm64: dts: st: add STM32MP2 power domains Patrick Delaunay
@ 2026-11-04 13:55 ` Patrick Delaunay
2026-11-04 13:55 ` [PATCH 2/7] pmdomain: st: add STM32MP power domain Patrick Delaunay
` (6 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Patrick Delaunay @ 2026-11-04 13:55 UTC (permalink / raw)
To: Patrick Delaunay, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Maxime Coquelin, Alexandre Torgue
Cc: Linux STM32, devicetree, linux-arm-kernel, linux-kernel
Add binding documentation for the power domains found on
STMicroelectronics STM32MP SoCs.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---
.../bindings/power/st,stm32mp-pm-domain.yaml | 46 +++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/st,stm32mp-pm-domain.yaml
diff --git a/Documentation/devicetree/bindings/power/st,stm32mp-pm-domain.yaml b/Documentation/devicetree/bindings/power/st,stm32mp-pm-domain.yaml
new file mode 100644
index 000000000000..4ab477fb4499
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/st,stm32mp-pm-domain.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/st,stm32mp-pm-domain.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32MP generic power domain
+
+maintainers:
+ - Patrick Delaunay <patrick.delaunay@foss.st.com>
+
+allOf:
+ - $ref: /schemas/power/power-domain.yaml#
+
+description: |
+ The STM32MP SoCs contain a D1 domain which defines the devices assigned to
+ Cortex A cluster, the devices in this domain are functional only when this
+ cluster is not in low power modes (Stop modes) with clock OFF.
+
+ This PM domain node represents this dependency, based on PM framework and
+ without wake-up path support.
+
+properties:
+ compatible:
+ const: st,stm32mp-pm-domain
+
+ '#power-domain-cells':
+ const: 0
+
+ power-domains:
+ maxItems: 1
+
+additionalProperties: false
+
+required:
+ - compatible
+ - '#power-domain-cells'
+ - power-domains
+
+examples:
+ - |
+ power-domain-d1 {
+ compatible = "st,stm32mp-pm-domain";
+ #power-domain-cells = <0>;
+ power-domains = <&cluster_pd>;
+ };
--
2.43.0
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH 2/7] pmdomain: st: add STM32MP power domain
2026-11-04 13:55 [PATCH 0/7] arm64: dts: st: add STM32MP2 power domains Patrick Delaunay
2026-11-04 13:55 ` [PATCH 1/7] dt-bindings: power: st: add STM32MP PM domain binding Patrick Delaunay
@ 2026-11-04 13:55 ` Patrick Delaunay
2026-11-14 10:40 ` Ulf Hansson
2026-11-04 13:55 ` [PATCH 3/7] MAINTAINERS: add entry for ST STM32 power domain driver Patrick Delaunay
` (5 subsequent siblings)
7 siblings, 1 reply; 12+ messages in thread
From: Patrick Delaunay @ 2026-11-04 13:55 UTC (permalink / raw)
To: Ulf Hansson, Patrick Delaunay, Maxime Coquelin, Alexandre Torgue
Cc: Linux STM32, linux-arm-kernel, linux-kernel, linux-pm
Add a generic PM domain for the STM32MP D1 domain, using the PM
framework to manage attached devices.
Make D1 a subdomain of the PSCI cluster domain, so active devices keep
the Cortex-A35 cluster in Run1. Do not set GENPD_FLAG_ACTIVE_WAKEUP on
D1: system wakeups are handled by EXTI1 through the RET_PD PSCI domain.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---
drivers/pmdomain/st/Kconfig | 14 +++
drivers/pmdomain/st/Makefile | 1 +
drivers/pmdomain/st/stm32mp-pm-domain.c | 128 ++++++++++++++++++++++++
3 files changed, 143 insertions(+)
create mode 100644 drivers/pmdomain/st/stm32mp-pm-domain.c
diff --git a/drivers/pmdomain/st/Kconfig b/drivers/pmdomain/st/Kconfig
index a77a70211f61..da8a54d44158 100644
--- a/drivers/pmdomain/st/Kconfig
+++ b/drivers/pmdomain/st/Kconfig
@@ -1,4 +1,18 @@
# SPDX-License-Identifier: GPL-2.0-only
+
+config STM32MP_PM_DOMAIN
+ tristate "STM32MP PM domain"
+ depends on ARCH_STM32 || COMPILE_TEST
+ select PM_GENERIC_DOMAINS
+ default y
+ help
+ Enable support for the STM32MP Power Management (PM) domain driver.
+ This driver implements a generic PM domain for STM32MP SoCs, allowing
+ the kernel to manage power domains for various hardware blocks using
+ the generic power management framework. It is typically used to
+ control the power state of devices and peripherals on STM32MP
+ platforms. If unsure, say Y.
+
config UX500_PM_DOMAIN
bool "ST-Ericsson ux500 Power Domain"
depends on ARCH_U8500 || COMPILE_TEST
diff --git a/drivers/pmdomain/st/Makefile b/drivers/pmdomain/st/Makefile
index 6d8b617eb834..0e8131b7fe9d 100644
--- a/drivers/pmdomain/st/Makefile
+++ b/drivers/pmdomain/st/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_STM32MP_PM_DOMAIN) += stm32mp-pm-domain.o
obj-$(CONFIG_UX500_PM_DOMAIN) += ste-ux500-pm-domain.o
diff --git a/drivers/pmdomain/st/stm32mp-pm-domain.c b/drivers/pmdomain/st/stm32mp-pm-domain.c
new file mode 100644
index 000000000000..1a6393840f56
--- /dev/null
+++ b/drivers/pmdomain/st/stm32mp-pm-domain.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Implements PM domain using the generic PM domain for STM32MP SoC.
+ *
+ * Copyright (C) STMicroelectronics 2026
+ * Author(s): Patrick Delaunay <patrick.delaunay@foss.st.com>
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+
+struct stm32mp_pm_subdomain_link {
+ struct generic_pm_domain *domain;
+ struct generic_pm_domain *subdomain;
+};
+
+static void stm32mp_pm_domain_genpd_remove(void *data)
+{
+ struct generic_pm_domain *genpd = data;
+
+ pm_genpd_remove(genpd);
+}
+
+static void stm32mp_pm_domain_release_subdomain(void *data)
+{
+ struct stm32mp_pm_subdomain_link *link = data;
+
+ pm_genpd_remove_subdomain(link->domain, link->subdomain);
+}
+
+static void stm32mp_pm_domain_release_genpd_provider(void *data)
+{
+ struct device_node *np = data;
+
+ of_genpd_del_provider(np);
+}
+
+static int stm32mp_pm_domain_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct generic_pm_domain *pd;
+ struct stm32mp_pm_subdomain_link *link;
+ int ret;
+
+ if (!np)
+ return -ENODEV;
+
+ /* The OF node must specify us as a power-domain provider. */
+ if (!of_property_present(np, "#power-domain-cells")) {
+ dev_warn(dev, "%pOF lacks #power-domain-cells\n", np);
+ return 0;
+ }
+
+ pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+ if (!pd)
+ return -ENOMEM;
+
+ pd->name = dev_name(dev);
+
+ /*
+ * Domain based only on PM clk framework, no GENPD_FLAG_ACTIVE_WAKEUP
+ * support, the wake-up path is handled by interrupt driver with its
+ * power domain. GENPD_FLAG_NO_STAY_ON as domain no required sync state,
+ * domain allow low power modes even if devices are not probed
+ */
+ pd->flags = GENPD_FLAG_PM_CLK | GENPD_FLAG_IRQ_SAFE | GENPD_FLAG_NO_STAY_ON;
+
+ ret = pm_genpd_init(pd, NULL, false);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to init power domain\n");
+
+ ret = devm_add_action_or_reset(dev, stm32mp_pm_domain_genpd_remove, pd);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to add action\n");
+
+ link = devm_kzalloc(dev, sizeof(*link), GFP_KERNEL);
+ if (!link)
+ return -ENOMEM;
+ link->domain = pd_to_genpd(dev->pm_domain);
+ link->subdomain = pd;
+
+ ret = pm_genpd_add_subdomain(link->domain, link->subdomain);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to add subdomain\n");
+
+ ret = devm_add_action_or_reset(dev, stm32mp_pm_domain_release_subdomain, link);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to add action\n");
+
+ ret = of_genpd_add_provider_simple(np, pd);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to add power domain provider\n");
+
+ ret = devm_add_action_or_reset(dev, stm32mp_pm_domain_release_genpd_provider, np);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to add action\n");
+
+ ret = devm_pm_runtime_enable(dev);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to enable pm-runtime\n");
+
+ return 0;
+}
+
+static const struct of_device_id stm32mp_pm_domain_matches[] = {
+ { .compatible = "st,stm32mp-pm-domain", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, stm32mp_pm_domain_matches);
+
+static struct platform_driver stm32mp_pm_domain_driver = {
+ .driver = {
+ .name = "stm32mp_pm_domain",
+ .of_match_table = stm32mp_pm_domain_matches,
+ },
+ .probe = stm32mp_pm_domain_probe,
+};
+
+module_platform_driver(stm32mp_pm_domain_driver);
+
+MODULE_AUTHOR("Patrick Delaunay <patrick.delaunay@foss.st.com>");
+MODULE_DESCRIPTION("ST STM32MP power domain driver");
+MODULE_LICENSE("GPL");
--
2.43.0
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH 2/7] pmdomain: st: add STM32MP power domain
2026-11-04 13:55 ` [PATCH 2/7] pmdomain: st: add STM32MP power domain Patrick Delaunay
@ 2026-11-14 10:40 ` Ulf Hansson
2026-11-16 15:10 ` Patrick DELAUNAY
0 siblings, 1 reply; 12+ messages in thread
From: Ulf Hansson @ 2026-11-14 10:40 UTC (permalink / raw)
To: Patrick Delaunay
Cc: Ulf Hansson, Maxime Coquelin, Alexandre Torgue, Linux STM32,
linux-arm-kernel, linux-kernel, linux-pm
On Wed, Nov 4, 2026 at 3:02 PM Patrick Delaunay
<patrick.delaunay@foss.st.com> wrote:
>
> Add a generic PM domain for the STM32MP D1 domain, using the PM
> framework to manage attached devices.
>
> Make D1 a subdomain of the PSCI cluster domain, so active devices keep
> the Cortex-A35 cluster in Run1. Do not set GENPD_FLAG_ACTIVE_WAKEUP on
> D1: system wakeups are handled by EXTI1 through the RET_PD PSCI domain.
Would you mind elaborating on the system wakeups a bit more?
The devices that get attached to the D1 PM domain do they have another
PM domain as well, to support the system wakeups?
Just trying to make sure this gets modeled correctly.
One comment in the code below.
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
> ---
>
> drivers/pmdomain/st/Kconfig | 14 +++
> drivers/pmdomain/st/Makefile | 1 +
> drivers/pmdomain/st/stm32mp-pm-domain.c | 128 ++++++++++++++++++++++++
> 3 files changed, 143 insertions(+)
> create mode 100644 drivers/pmdomain/st/stm32mp-pm-domain.c
>
> diff --git a/drivers/pmdomain/st/Kconfig b/drivers/pmdomain/st/Kconfig
> index a77a70211f61..da8a54d44158 100644
> --- a/drivers/pmdomain/st/Kconfig
> +++ b/drivers/pmdomain/st/Kconfig
> @@ -1,4 +1,18 @@
> # SPDX-License-Identifier: GPL-2.0-only
> +
> +config STM32MP_PM_DOMAIN
> + tristate "STM32MP PM domain"
> + depends on ARCH_STM32 || COMPILE_TEST
> + select PM_GENERIC_DOMAINS
> + default y
> + help
> + Enable support for the STM32MP Power Management (PM) domain driver.
> + This driver implements a generic PM domain for STM32MP SoCs, allowing
> + the kernel to manage power domains for various hardware blocks using
> + the generic power management framework. It is typically used to
> + control the power state of devices and peripherals on STM32MP
> + platforms. If unsure, say Y.
> +
> config UX500_PM_DOMAIN
> bool "ST-Ericsson ux500 Power Domain"
> depends on ARCH_U8500 || COMPILE_TEST
> diff --git a/drivers/pmdomain/st/Makefile b/drivers/pmdomain/st/Makefile
> index 6d8b617eb834..0e8131b7fe9d 100644
> --- a/drivers/pmdomain/st/Makefile
> +++ b/drivers/pmdomain/st/Makefile
> @@ -1,2 +1,3 @@
> # SPDX-License-Identifier: GPL-2.0-only
> +obj-$(CONFIG_STM32MP_PM_DOMAIN) += stm32mp-pm-domain.o
> obj-$(CONFIG_UX500_PM_DOMAIN) += ste-ux500-pm-domain.o
> diff --git a/drivers/pmdomain/st/stm32mp-pm-domain.c b/drivers/pmdomain/st/stm32mp-pm-domain.c
> new file mode 100644
> index 000000000000..1a6393840f56
> --- /dev/null
> +++ b/drivers/pmdomain/st/stm32mp-pm-domain.c
> @@ -0,0 +1,128 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Implements PM domain using the generic PM domain for STM32MP SoC.
> + *
> + * Copyright (C) STMicroelectronics 2026
> + * Author(s): Patrick Delaunay <patrick.delaunay@foss.st.com>
> + */
> +
> +#include <linux/device.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_domain.h>
> +#include <linux/pm_runtime.h>
> +
> +struct stm32mp_pm_subdomain_link {
> + struct generic_pm_domain *domain;
> + struct generic_pm_domain *subdomain;
> +};
> +
> +static void stm32mp_pm_domain_genpd_remove(void *data)
> +{
> + struct generic_pm_domain *genpd = data;
> +
> + pm_genpd_remove(genpd);
> +}
> +
> +static void stm32mp_pm_domain_release_subdomain(void *data)
> +{
> + struct stm32mp_pm_subdomain_link *link = data;
> +
> + pm_genpd_remove_subdomain(link->domain, link->subdomain);
> +}
> +
> +static void stm32mp_pm_domain_release_genpd_provider(void *data)
> +{
> + struct device_node *np = data;
> +
> + of_genpd_del_provider(np);
> +}
> +
> +static int stm32mp_pm_domain_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *np = dev->of_node;
> + struct generic_pm_domain *pd;
> + struct stm32mp_pm_subdomain_link *link;
> + int ret;
> +
> + if (!np)
> + return -ENODEV;
> +
> + /* The OF node must specify us as a power-domain provider. */
> + if (!of_property_present(np, "#power-domain-cells")) {
> + dev_warn(dev, "%pOF lacks #power-domain-cells\n", np);
> + return 0;
> + }
> +
> + pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
> + if (!pd)
> + return -ENOMEM;
> +
> + pd->name = dev_name(dev);
> +
> + /*
> + * Domain based only on PM clk framework, no GENPD_FLAG_ACTIVE_WAKEUP
> + * support, the wake-up path is handled by interrupt driver with its
> + * power domain. GENPD_FLAG_NO_STAY_ON as domain no required sync state,
> + * domain allow low power modes even if devices are not probed
> + */
> + pd->flags = GENPD_FLAG_PM_CLK | GENPD_FLAG_IRQ_SAFE | GENPD_FLAG_NO_STAY_ON;
> +
> + ret = pm_genpd_init(pd, NULL, false);
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to init power domain\n");
> +
> + ret = devm_add_action_or_reset(dev, stm32mp_pm_domain_genpd_remove, pd);
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to add action\n");
> +
> + link = devm_kzalloc(dev, sizeof(*link), GFP_KERNEL);
> + if (!link)
> + return -ENOMEM;
> + link->domain = pd_to_genpd(dev->pm_domain);
> + link->subdomain = pd;
> +
> + ret = pm_genpd_add_subdomain(link->domain, link->subdomain);
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to add subdomain\n");
> +
> + ret = devm_add_action_or_reset(dev, stm32mp_pm_domain_release_subdomain, link);
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to add action\n");
> +
> + ret = of_genpd_add_provider_simple(np, pd);
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to add power domain provider\n");
> +
> + ret = devm_add_action_or_reset(dev, stm32mp_pm_domain_release_genpd_provider, np);
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to add action\n");
> +
> + ret = devm_pm_runtime_enable(dev);
What is this used for?
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to enable pm-runtime\n");
> +
> + return 0;
> +}
> +
> +static const struct of_device_id stm32mp_pm_domain_matches[] = {
> + { .compatible = "st,stm32mp-pm-domain", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, stm32mp_pm_domain_matches);
> +
> +static struct platform_driver stm32mp_pm_domain_driver = {
> + .driver = {
> + .name = "stm32mp_pm_domain",
> + .of_match_table = stm32mp_pm_domain_matches,
> + },
> + .probe = stm32mp_pm_domain_probe,
> +};
> +
> +module_platform_driver(stm32mp_pm_domain_driver);
> +
> +MODULE_AUTHOR("Patrick Delaunay <patrick.delaunay@foss.st.com>");
> +MODULE_DESCRIPTION("ST STM32MP power domain driver");
> +MODULE_LICENSE("GPL");
> --
> 2.43.0
>
Kind regards
Uffe
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH 2/7] pmdomain: st: add STM32MP power domain
2026-11-14 10:40 ` Ulf Hansson
@ 2026-11-16 15:10 ` Patrick DELAUNAY
0 siblings, 0 replies; 12+ messages in thread
From: Patrick DELAUNAY @ 2026-11-16 15:10 UTC (permalink / raw)
To: Ulf Hansson, Antonio Borneo
Cc: Ulf Hansson, Maxime Coquelin, Alexandre Torgue, Linux STM32,
linux-arm-kernel, linux-kernel, linux-pm
Hi,
On 11/14/26 11:40, Ulf Hansson wrote:
> On Wed, Nov 4, 2026 at 3:02 PM Patrick Delaunay
> <patrick.delaunay@foss.st.com> wrote:
>> Add a generic PM domain for the STM32MP D1 domain, using the PM
>> framework to manage attached devices.
>>
>> Make D1 a subdomain of the PSCI cluster domain, so active devices keep
>> the Cortex-A35 cluster in Run1. Do not set GENPD_FLAG_ACTIVE_WAKEUP on
>> D1: system wakeups are handled by EXTI1 through the RET_PD PSCI domain.
> Would you mind elaborating on the system wakeups a bit more?
>
> The devices that get attached to the D1 PM domain do they have another
> PM domain as well, to support the system wakeups?
Each device in D1 domain use
- D1 domain to allow any low power mode (Stop1) when they are suspended
- EXTI1 interruption to manage wake-up patch
For example for UART:
usart2: serial@400e0000 {
compatible = "st,stm32h7-uart";
reg = <0x400e0000 0x400>;
- interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&exti1 27 IRQ_TYPE_LEVEL_HIGH>;
...
power-domains = <&d1_pd>;
+ wakeup-source;
status = "disabled";
};
Then the system wake up for S2Idle is managed by EXTI1 device wake-up state
when interruptions are activated.
Moreover LPLV-Stop1 is not allowed when EXTI is "active" for OSI, i.e
when at least
one interruption of Group2 activated.
To explain deeper, when OSI is fully activated [1], i.e with full
upstream for STM32MP25
- the PSCI power domain Cluster Domain allows "Stop1" and "LP-Stop1" low
power mode as CpuIdle mode
- D1 is part of Cluster => the device is D1 domain allow low power
mode when they are suspended
=> active Wake-Up for device
in D1 domain device is compatible with Stop1/LP-Stop1
the wake-up path is NOT
propagated to parent domain
- the PSCI Retention Domain allows "LPLV-Stop1"
EXTI is part of this domain (not yet upstreamed) [2] :
exti1: interrupt-controller@44220000 {
compatible = "st,stm32mp1-exti";
interrupt-controller;
#interrupt-cells = <2>;
+ power-domains = <&ret_pd>;
....
}
the Group2 wake up sources are handled by EXTI1 and but they are not
functional when the LPLV mode is performed.
We handled this restriction by EXTI patches no yet upstreamed [3]
- activating the wake-up path in EXTI1 device when at least one
interruption of group2 is activated for S2DIle mode
- with EXTI1 pm_runtime state for OSI mode
So the "ret_pd" domain can't be deactivated when EXTI1 interrupts are
activated for runtime (OSI) or
part of the wake-up patch for S2IDLE
[1]
https://wiki.st.com/stm32mpu/wiki/Power_overview#STM32MP2_series_power_domains
[2]
https://github.com/STMicroelectronics/linux/blob/v6.18-stm32mp/arch/arm64/boot/dts/st/stm32mp251.dtsi
https://github.com/STMicroelectronics/linux/commit/d216f8439d14e0a11475495cf5445e05cc4a9da9
[3]
https://github.com/STMicroelectronics/linux/blob/v6.18-stm32mp/drivers/irqchip/irq-stm32mp-exti.c
irqchip: stm32mp-exti: Add support of pm runtime
https://github.com/STMicroelectronics/linux/commit/4a4a20f5c5aae461a7a14c98efeddbc9cd08c672
irqchip: stm32mp-exti: Add support of wake-up path for S2Idle
https://github.com/STMicroelectronics/linux/commit/1d3b854e7b95318b67afd2dc16b8ff5fc060443a
>
> Just trying to make sure this gets modeled correctly.
I hope that follow the genPD model...
and if it is the case , do you need update in the commit message to
clarify it ?
>
> One comment in the code below.
>
>> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
>> ---
>>
>> drivers/pmdomain/st/Kconfig | 14 +++
>> drivers/pmdomain/st/Makefile | 1 +
>> drivers/pmdomain/st/stm32mp-pm-domain.c | 128 ++++++++++++++++++++++++
>> 3 files changed, 143 insertions(+)
>> create mode 100644 drivers/pmdomain/st/stm32mp-pm-domain.c
>>
>> diff --git a/drivers/pmdomain/st/Kconfig b/drivers/pmdomain/st/Kconfig
>> index a77a70211f61..da8a54d44158 100644
>> --- a/drivers/pmdomain/st/Kconfig
>> +++ b/drivers/pmdomain/st/Kconfig
>> @@ -1,4 +1,18 @@
>> # SPDX-License-Identifier: GPL-2.0-only
>> +
>> +config STM32MP_PM_DOMAIN
>> + tristate "STM32MP PM domain"
>> + depends on ARCH_STM32 || COMPILE_TEST
>> + select PM_GENERIC_DOMAINS
>> + default y
>> + help
>> + Enable support for the STM32MP Power Management (PM) domain driver.
>> + This driver implements a generic PM domain for STM32MP SoCs, allowing
>> + the kernel to manage power domains for various hardware blocks using
>> + the generic power management framework. It is typically used to
>> + control the power state of devices and peripherals on STM32MP
>> + platforms. If unsure, say Y.
>> +
>> config UX500_PM_DOMAIN
>> bool "ST-Ericsson ux500 Power Domain"
>> depends on ARCH_U8500 || COMPILE_TEST
>> diff --git a/drivers/pmdomain/st/Makefile b/drivers/pmdomain/st/Makefile
>> index 6d8b617eb834..0e8131b7fe9d 100644
>> --- a/drivers/pmdomain/st/Makefile
>> +++ b/drivers/pmdomain/st/Makefile
>> @@ -1,2 +1,3 @@
>> # SPDX-License-Identifier: GPL-2.0-only
>> +obj-$(CONFIG_STM32MP_PM_DOMAIN) += stm32mp-pm-domain.o
>> obj-$(CONFIG_UX500_PM_DOMAIN) += ste-ux500-pm-domain.o
>> diff --git a/drivers/pmdomain/st/stm32mp-pm-domain.c b/drivers/pmdomain/st/stm32mp-pm-domain.c
>> new file mode 100644
>> index 000000000000..1a6393840f56
>> --- /dev/null
>> +++ b/drivers/pmdomain/st/stm32mp-pm-domain.c
>> @@ -0,0 +1,128 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Implements PM domain using the generic PM domain for STM32MP SoC.
>> + *
>> + * Copyright (C) STMicroelectronics 2026
>> + * Author(s): Patrick Delaunay <patrick.delaunay@foss.st.com>
>> + */
>> +
>> +#include <linux/device.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pm_domain.h>
>> +#include <linux/pm_runtime.h>
>> +
>> +struct stm32mp_pm_subdomain_link {
>> + struct generic_pm_domain *domain;
>> + struct generic_pm_domain *subdomain;
>> +};
>> +
>> +static void stm32mp_pm_domain_genpd_remove(void *data)
>> +{
>> + struct generic_pm_domain *genpd = data;
>> +
>> + pm_genpd_remove(genpd);
>> +}
>> +
>> +static void stm32mp_pm_domain_release_subdomain(void *data)
>> +{
>> + struct stm32mp_pm_subdomain_link *link = data;
>> +
>> + pm_genpd_remove_subdomain(link->domain, link->subdomain);
>> +}
>> +
>> +static void stm32mp_pm_domain_release_genpd_provider(void *data)
>> +{
>> + struct device_node *np = data;
>> +
>> + of_genpd_del_provider(np);
>> +}
>> +
>> +static int stm32mp_pm_domain_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct device_node *np = dev->of_node;
>> + struct generic_pm_domain *pd;
>> + struct stm32mp_pm_subdomain_link *link;
>> + int ret;
>> +
>> + if (!np)
>> + return -ENODEV;
>> +
>> + /* The OF node must specify us as a power-domain provider. */
>> + if (!of_property_present(np, "#power-domain-cells")) {
>> + dev_warn(dev, "%pOF lacks #power-domain-cells\n", np);
>> + return 0;
>> + }
>> +
>> + pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
>> + if (!pd)
>> + return -ENOMEM;
>> +
>> + pd->name = dev_name(dev);
>> +
>> + /*
>> + * Domain based only on PM clk framework, no GENPD_FLAG_ACTIVE_WAKEUP
>> + * support, the wake-up path is handled by interrupt driver with its
>> + * power domain. GENPD_FLAG_NO_STAY_ON as domain no required sync state,
>> + * domain allow low power modes even if devices are not probed
>> + */
>> + pd->flags = GENPD_FLAG_PM_CLK | GENPD_FLAG_IRQ_SAFE | GENPD_FLAG_NO_STAY_ON;
>> +
>> + ret = pm_genpd_init(pd, NULL, false);
>> + if (ret)
>> + return dev_err_probe(dev, ret, "failed to init power domain\n");
>> +
>> + ret = devm_add_action_or_reset(dev, stm32mp_pm_domain_genpd_remove, pd);
>> + if (ret)
>> + return dev_err_probe(dev, ret, "failed to add action\n");
>> +
>> + link = devm_kzalloc(dev, sizeof(*link), GFP_KERNEL);
>> + if (!link)
>> + return -ENOMEM;
>> + link->domain = pd_to_genpd(dev->pm_domain);
>> + link->subdomain = pd;
>> +
>> + ret = pm_genpd_add_subdomain(link->domain, link->subdomain);
>> + if (ret)
>> + return dev_err_probe(dev, ret, "failed to add subdomain\n");
>> +
>> + ret = devm_add_action_or_reset(dev, stm32mp_pm_domain_release_subdomain, link);
>> + if (ret)
>> + return dev_err_probe(dev, ret, "failed to add action\n");
>> +
>> + ret = of_genpd_add_provider_simple(np, pd);
>> + if (ret)
>> + return dev_err_probe(dev, ret, "failed to add power domain provider\n");
>> +
>> + ret = devm_add_action_or_reset(dev, stm32mp_pm_domain_release_genpd_provider, np);
>> + if (ret)
>> + return dev_err_probe(dev, ret, "failed to add action\n");
>> +
>> + ret = devm_pm_runtime_enable(dev);
> What is this used for?
This pattfrom driver is part of power-domain-cluster because in device
tree a power domain is associated to it DT node
d1_pd: power-domain-d1 {
compatible = "st,stm32mp-pm-domain";
#power-domain-cells = <0>;
power-domains = <&cluster_pd>;
};
This power domain is used to create the GENPD sub domain "power-domain-d1"
but as side effect the associated platform device is also in this PSCI
domain
so it must manage correctly a PM state.
Without this line the runtime status is "unsupported" and the cluster
domain is not deactivated
$> cat /sys/kernel/debug/pm_genpd/pm_genpd_summary
domain status children performance
/device runtime status managed by
------------------------------------------------------------------------------
power-domain-d1 on 0
482c0000.ethernet active 0
SW
482d0000.ethernet active 0
SW
40130000.i2c suspended 0
SW
400e0000.serial active 0
SW
48220000.mmc suspended 0
SW
48030000.dcmipp suspended 0
SW
power-domain-cpu1 on 0
genpd:0:cpu1 active 0
SW
power-domain-retention on 0
power-domain-cluster
40400000.dma-controller suspended 0
SW
40410000.dma-controller suspended 0
SW
40420000.dma-controller suspended 0
SW
power-domain-cluster on 0
power-domain-cpu0,
power-domain-cpu1, power-domain-d1
power-domain-d1 unsupported 0
SW <<<< HERE
power-domain-cpu0 off-0 0
genpd:0:cpu0 suspended 0
SW
a other (better?) solution is to remove the linked create by framework
as it i done in drivers/pmdomain/apple/pmgr-pwrstate.c:288:
with:
+ pm_genpd_remove_device(dev);
I change if you confirm that it is better.
>
>> + if (ret)
>> + return dev_err_probe(dev, ret, "failed to enable pm-runtime\n");
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id stm32mp_pm_domain_matches[] = {
>> + { .compatible = "st,stm32mp-pm-domain", },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, stm32mp_pm_domain_matches);
>> +
>> +static struct platform_driver stm32mp_pm_domain_driver = {
>> + .driver = {
>> + .name = "stm32mp_pm_domain",
>> + .of_match_table = stm32mp_pm_domain_matches,
>> + },
>> + .probe = stm32mp_pm_domain_probe,
>> +};
>> +
>> +module_platform_driver(stm32mp_pm_domain_driver);
>> +
>> +MODULE_AUTHOR("Patrick Delaunay <patrick.delaunay@foss.st.com>");
>> +MODULE_DESCRIPTION("ST STM32MP power domain driver");
>> +MODULE_LICENSE("GPL");
>> --
>> 2.43.0
>>
> Kind regards
> Uffe
Regards
Patrick
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 3/7] MAINTAINERS: add entry for ST STM32 power domain driver
2026-11-04 13:55 [PATCH 0/7] arm64: dts: st: add STM32MP2 power domains Patrick Delaunay
2026-11-04 13:55 ` [PATCH 1/7] dt-bindings: power: st: add STM32MP PM domain binding Patrick Delaunay
2026-11-04 13:55 ` [PATCH 2/7] pmdomain: st: add STM32MP power domain Patrick Delaunay
@ 2026-11-04 13:55 ` Patrick Delaunay
2026-11-04 16:41 ` Patrick Delaunay
2026-11-04 13:55 ` [PATCH 4/7] arm64: dts: st: add D1 domain for STM32MP25 family Patrick Delaunay
` (4 subsequent siblings)
7 siblings, 1 reply; 12+ messages in thread
From: Patrick Delaunay @ 2026-11-04 13:55 UTC (permalink / raw)
To: nobody; +Cc: Linux STM32, Patrick Delaunay, linux-kernel
Add myself as maintainer of STM32MP power domain driver.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---
MAINTAINERS | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 93abbb315065..8644100ca909 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -26571,6 +26571,13 @@ F: drivers/pinctrl/stm32/
F: include/dt-bindings/pinctrl/stm32-pinfunc.h
X: drivers/pinctrl/stm32/pinctrl-stm32-hdp.c
+ST STM32 POWER DOMAIN DRIVER
+M: Patrick Delaunay <patrick.delaunay@foss.st.com>
+L: linux-stm32@st-md-mailman.stormreply.com (moderated for non-subscribers)
+S: Maintained
+F: Documentation/devicetree/bindings/power/st,stm32mp-pm-domain.yaml
+F: drivers/pmdomain/st/stm32mp-pm-domain.c
+
ST STM32 SPI DRIVER
M: Alain Volmat <alain.volmat@foss.st.com>
L: linux-spi@vger.kernel.org
--
2.43.0
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH 3/7] MAINTAINERS: add entry for ST STM32 power domain driver
2026-11-04 13:55 ` [PATCH 3/7] MAINTAINERS: add entry for ST STM32 power domain driver Patrick Delaunay
@ 2026-11-04 16:41 ` Patrick Delaunay
0 siblings, 0 replies; 12+ messages in thread
From: Patrick Delaunay @ 2026-11-04 16:41 UTC (permalink / raw)
To: Alexandre Torgue; +Cc: Linux STM32, Patrick Delaunay, linux-kernel
Add myself as maintainer of STM32MP power domain driver.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---
MAINTAINERS | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 93abbb315065..8644100ca909 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -26571,6 +26571,13 @@ F: drivers/pinctrl/stm32/
F: include/dt-bindings/pinctrl/stm32-pinfunc.h
X: drivers/pinctrl/stm32/pinctrl-stm32-hdp.c
+ST STM32 POWER DOMAIN DRIVER
+M: Patrick Delaunay <patrick.delaunay@foss.st.com>
+L: linux-stm32@st-md-mailman.stormreply.com (moderated for non-subscribers)
+S: Maintained
+F: Documentation/devicetree/bindings/power/st,stm32mp-pm-domain.yaml
+F: drivers/pmdomain/st/stm32mp-pm-domain.c
+
ST STM32 SPI DRIVER
M: Alain Volmat <alain.volmat@foss.st.com>
L: linux-spi@vger.kernel.org
--
2.43.0
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 4/7] arm64: dts: st: add D1 domain for STM32MP25 family
2026-11-04 13:55 [PATCH 0/7] arm64: dts: st: add STM32MP2 power domains Patrick Delaunay
` (2 preceding siblings ...)
2026-11-04 13:55 ` [PATCH 3/7] MAINTAINERS: add entry for ST STM32 power domain driver Patrick Delaunay
@ 2026-11-04 13:55 ` Patrick Delaunay
2026-11-04 13:55 ` [PATCH 5/7] arm64: dts: st: fix power-domain labels DT coding style in STM32MP25 Patrick Delaunay
` (3 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Patrick Delaunay @ 2026-11-04 13:55 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Maxime Coquelin,
Alexandre Torgue
Cc: Linux STM32, Patrick Delaunay, devicetree, linux-arm-kernel,
linux-kernel
Add the D1 power domain for devices that require the Cortex-A35
cluster to remain in Run1. Keep S2Idle wake-up handling on the
EXTI1/RET_PD path.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---
arch/arm64/boot/dts/st/stm32mp251.dtsi | 110 +++++++++++++++----------
arch/arm64/boot/dts/st/stm32mp253.dtsi | 3 +-
arch/arm64/boot/dts/st/stm32mp255.dtsi | 2 +-
3 files changed, 69 insertions(+), 46 deletions(-)
diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index bf1542818be2..d5204d88344f 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -152,6 +152,12 @@ v2m0: v2m@48090000 {
};
};
+ d1_pd: power-domain-d1 {
+ compatible = "st,stm32mp-pm-domain";
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
@@ -209,6 +215,7 @@ hpdma: dma-controller@40400000 {
<GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scmi_clk CK_SCMI_HPDMA1>;
+ power-domains = <&RET_PD>;
#dma-cells = <3>;
};
@@ -232,6 +239,7 @@ hpdma2: dma-controller@40410000 {
<GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scmi_clk CK_SCMI_HPDMA2>;
+ power-domains = <&RET_PD>;
#dma-cells = <3>;
};
@@ -255,6 +263,7 @@ hpdma3: dma-controller@40420000 {
<GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scmi_clk CK_SCMI_HPDMA3>;
+ power-domains = <&RET_PD>;
#dma-cells = <3>;
};
@@ -273,7 +282,7 @@ ommanager: ommanager@40500000 {
<&scmi_reset RST_SCMI_OSPI2>;
reset-names = "omm", "ospi1", "ospi2";
access-controllers = <&rifsc 111>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
#address-cells = <2>;
#size-cells = <1>;
st,syscfg-amcr = <&syscfg 0x2c00 0x7>;
@@ -290,7 +299,7 @@ ospi1: spi@0 {
resets = <&scmi_reset RST_SCMI_OSPI1>,
<&scmi_reset RST_SCMI_OSPI1DLL>;
access-controllers = <&rifsc 74>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
st,syscfg-dlyb = <&syscfg 0x1000>;
status = "disabled";
};
@@ -306,7 +315,7 @@ ospi2: spi@1 {
resets = <&scmi_reset RST_SCMI_OSPI2>,
<&scmi_reset RST_SCMI_OSPI2DLL>;
access-controllers = <&rifsc 75>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
st,syscfg-dlyb = <&syscfg 0x1400>;
status = "disabled";
};
@@ -330,7 +339,7 @@ timers2: timer@40000000 {
#address-cells = <1>;
#size-cells = <0>;
access-controllers = <&rifsc 1>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
counter {
@@ -361,7 +370,7 @@ timers3: timer@40010000 {
#address-cells = <1>;
#size-cells = <0>;
access-controllers = <&rifsc 2>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
counter {
@@ -392,7 +401,7 @@ timers4: timer@40020000 {
#address-cells = <1>;
#size-cells = <0>;
access-controllers = <&rifsc 3>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
counter {
@@ -423,7 +432,7 @@ timers5: timer@40030000 {
#address-cells = <1>;
#size-cells = <0>;
access-controllers = <&rifsc 4>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
counter {
@@ -454,7 +463,7 @@ timers6: timer@40040000 {
#address-cells = <1>;
#size-cells = <0>;
access-controllers = <&rifsc 5>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
counter {
@@ -479,7 +488,7 @@ timers7: timer@40050000 {
#address-cells = <1>;
#size-cells = <0>;
access-controllers = <&rifsc 6>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
counter {
@@ -504,7 +513,7 @@ timers12: timer@40060000 {
#address-cells = <1>;
#size-cells = <0>;
access-controllers = <&rifsc 10>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
counter {
@@ -535,7 +544,7 @@ timers13: timer@40070000 {
#address-cells = <1>;
#size-cells = <0>;
access-controllers = <&rifsc 11>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
counter {
@@ -566,7 +575,7 @@ timers14: timer@40080000 {
#address-cells = <1>;
#size-cells = <0>;
access-controllers = <&rifsc 12>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
counter {
@@ -686,7 +695,7 @@ spi2: spi@400b0000 {
<&hpdma 52 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 23>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -717,7 +726,7 @@ spi3: spi@400c0000 {
<&hpdma 54 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 24>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -744,6 +753,7 @@ usart2: serial@400e0000 {
<&hpdma 12 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 32>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -756,6 +766,7 @@ usart3: serial@400f0000 {
<&hpdma 14 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 33>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -768,6 +779,7 @@ uart4: serial@40100000 {
<&hpdma 16 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 34>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -780,6 +792,7 @@ uart5: serial@40110000 {
<&hpdma 18 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 35>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -796,7 +809,7 @@ i2c1: i2c@40120000 {
<&hpdma 28 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 41>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
i2c-analog-filter;
wakeup-source;
status = "disabled";
@@ -815,7 +828,7 @@ i2c2: i2c@40130000 {
<&hpdma 31 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 42>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
i2c-analog-filter;
wakeup-source;
status = "disabled";
@@ -834,7 +847,7 @@ i2c3: i2c@40140000 {
<&hpdma 34 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 43>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
i2c-analog-filter;
wakeup-source;
status = "disabled";
@@ -853,7 +866,7 @@ i2c4: i2c@40150000 {
<&hpdma 37 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 44>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
i2c-analog-filter;
wakeup-source;
status = "disabled";
@@ -872,7 +885,7 @@ i2c5: i2c@40160000 {
<&hpdma 40 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 45>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
i2c-analog-filter;
wakeup-source;
status = "disabled";
@@ -891,7 +904,7 @@ i2c6: i2c@40170000 {
<&hpdma 43 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 46>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
i2c-analog-filter;
wakeup-source;
status = "disabled";
@@ -910,7 +923,7 @@ i2c7: i2c@40180000 {
<&hpdma 46 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 47>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
i2c-analog-filter;
wakeup-source;
status = "disabled";
@@ -926,7 +939,7 @@ timers10: timer@401c0000 {
#address-cells = <1>;
#size-cells = <0>;
access-controllers = <&rifsc 8>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
counter {
@@ -957,7 +970,7 @@ timers11: timer@401d0000 {
#address-cells = <1>;
#size-cells = <0>;
access-controllers = <&rifsc 9>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
counter {
@@ -991,7 +1004,7 @@ timers1: timer@40200000 {
#address-cells = <1>;
#size-cells = <0>;
access-controllers = <&rifsc 0>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
counter {
@@ -1025,7 +1038,7 @@ timers8: timer@40210000 {
#address-cells = <1>;
#size-cells = <0>;
access-controllers = <&rifsc 7>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
counter {
@@ -1055,6 +1068,7 @@ usart6: serial@40220000 {
<&hpdma 20 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 36>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -1085,7 +1099,7 @@ spi1: spi@40230000 {
<&hpdma 50 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 22>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -1101,7 +1115,7 @@ spi4: spi@40240000 {
<&hpdma 56 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 25>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -1115,7 +1129,7 @@ timers15: timer@40250000 {
#address-cells = <1>;
#size-cells = <0>;
access-controllers = <&rifsc 13>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
counter {
@@ -1146,7 +1160,7 @@ timers16: timer@40260000 {
#address-cells = <1>;
#size-cells = <0>;
access-controllers = <&rifsc 14>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
counter {
@@ -1177,7 +1191,7 @@ timers17: timer@40270000 {
#address-cells = <1>;
#size-cells = <0>;
access-controllers = <&rifsc 15>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
counter {
@@ -1210,7 +1224,7 @@ spi5: spi@40280000 {
<&hpdma 58 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 26>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -1325,6 +1339,7 @@ uart9: serial@402c0000 {
<&hpdma 26 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 39>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -1341,7 +1356,7 @@ timers20: timer@40320000 {
#address-cells = <1>;
#size-cells = <0>;
access-controllers = <&rifsc 16>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
counter {
@@ -1371,6 +1386,7 @@ usart1: serial@40330000 {
<&hpdma 10 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 31>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -1420,7 +1436,7 @@ spi6: spi@40350000 {
<&hpdma 60 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 27>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -1436,7 +1452,7 @@ spi7: spi@40360000 {
<&hpdma 62 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 28>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -1449,6 +1465,7 @@ uart7: serial@40370000 {
<&hpdma 22 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 37>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -1461,6 +1478,7 @@ uart8: serial@40380000 {
<&hpdma 24 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 38>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -1474,7 +1492,7 @@ dcmi: dcmi@404a0000 {
dmas = <&hpdma 137 0x60 0x00003012>;
dma-names = "tx";
access-controllers = <&rifsc 88>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -1500,7 +1518,7 @@ spi8: spi@46020000 {
<&hpdma 172 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 29>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -1517,7 +1535,7 @@ i2c8: i2c@46040000 {
<&hpdma 169 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 48>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
i2c-analog-filter;
wakeup-source;
status = "disabled";
@@ -1649,7 +1667,7 @@ csi: csi@48020000 {
<&rcc CK_KER_CSIPHY>;
clock-names = "pclk", "txesc", "csi2phy";
access-controllers = <&rifsc 86>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -1661,7 +1679,7 @@ dcmipp: dcmipp@48030000 {
clocks = <&rcc CK_BUS_DCMIPP>, <&rcc CK_KER_CSI>;
clock-names = "kclk", "mclk";
access-controllers = <&rifsc 87>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -1674,7 +1692,7 @@ combophy: phy@480c0000 {
resets = <&rcc USB3PCIEPHY_R>;
reset-names = "phy";
access-controllers = <&rifsc 67>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
wakeup-source;
interrupts-extended = <&exti1 45 IRQ_TYPE_EDGE_FALLING>;
status = "disabled";
@@ -1692,7 +1710,7 @@ sdmmc1: mmc@48220000 {
cap-mmc-highspeed;
max-frequency = <120000000>;
access-controllers = <&rifsc 76>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -1708,7 +1726,7 @@ sdmmc2: mmc@48230000 {
cap-mmc-highspeed;
max-frequency = <166000000>;
access-controllers = <&rifsc 77>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -1724,6 +1742,7 @@ sdmmc3: mmc@48240000 {
cap-mmc-highspeed;
max-frequency = <166000000>;
access-controllers = <&rifsc 78>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -1753,6 +1772,7 @@ ethernet1: ethernet@482c0000 {
snps,tso;
st,syscon = <&syscfg 0x3000>;
access-controllers = <&rifsc 60>;
+ power-domains = <&d1_pd>;
status = "disabled";
mtl_rx_setup_1: rx-queues-config {
@@ -1784,6 +1804,7 @@ usbh_ohci: usb@482e0000 {
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb2_phy1>;
phy-names = "usb";
+ power-domains = <&d1_pd>;
resets = <&rcc USBH_R>;
status = "disabled";
};
@@ -1797,6 +1818,7 @@ usbh_ehci: usb@482f0000 {
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb2_phy1>;
phy-names = "usb";
+ power-domains = <&d1_pd>;
resets = <&rcc USBH_R>;
status = "disabled";
};
@@ -1828,7 +1850,7 @@ pcie_ep: pcie-ep@48400000 {
resets = <&rcc PCIE_R>;
phys = <&combophy PHY_TYPE_PCIE>;
access-controllers = <&rifsc 68>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -1854,7 +1876,7 @@ pcie_rc: pcie@48400000 {
resets = <&rcc PCIE_R>;
msi-parent = <&v2m0>;
access-controllers = <&rifsc 68>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
pcie@0,0 {
diff --git a/arch/arm64/boot/dts/st/stm32mp253.dtsi b/arch/arm64/boot/dts/st/stm32mp253.dtsi
index 19b3e55a4414..8562f13e5284 100644
--- a/arch/arm64/boot/dts/st/stm32mp253.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp253.dtsi
@@ -56,7 +56,7 @@ m_can1: can@402d0000 {
resets = <&rcc FDCAN_R>;
bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
access-controllers = <&rifsc 56>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -86,6 +86,7 @@ ethernet2: ethernet@482d0000 {
snps,tso;
st,syscon = <&syscfg 0x3400>;
access-controllers = <&rifsc 61>;
+ power-domains = <&d1_pd>;
status = "disabled";
mtl_rx_setup_2: rx-queues-config {
diff --git a/arch/arm64/boot/dts/st/stm32mp255.dtsi b/arch/arm64/boot/dts/st/stm32mp255.dtsi
index 7a598f53a2a0..003024eb2fc7 100644
--- a/arch/arm64/boot/dts/st/stm32mp255.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp255.dtsi
@@ -20,7 +20,7 @@ lvds: lvds@48060000 {
clock-names = "pclk", "ref";
resets = <&rcc LVDS_R>;
access-controllers = <&rifsc 84>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
--
2.43.0
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH 5/7] arm64: dts: st: fix power-domain labels DT coding style in STM32MP25
2026-11-04 13:55 [PATCH 0/7] arm64: dts: st: add STM32MP2 power domains Patrick Delaunay
` (3 preceding siblings ...)
2026-11-04 13:55 ` [PATCH 4/7] arm64: dts: st: add D1 domain for STM32MP25 family Patrick Delaunay
@ 2026-11-04 13:55 ` Patrick Delaunay
2026-11-04 13:55 ` [PATCH 6/7] arm64: dts: st: add D1 domain for STM32MP23 family Patrick Delaunay
` (2 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Patrick Delaunay @ 2026-11-04 13:55 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Maxime Coquelin,
Alexandre Torgue
Cc: Linux STM32, Patrick Delaunay, devicetree, linux-arm-kernel,
linux-kernel
Update STM32MP25 power domain labels to comply with the Device Tree
coding style requirement that labels use only lowercase letters,
digits and underscore.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---
arch/arm64/boot/dts/st/stm32mp251.dtsi | 24 ++++++++++++------------
arch/arm64/boot/dts/st/stm32mp253.dtsi | 6 +++---
2 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index d5204d88344f..43b4edfa07fc 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -22,7 +22,7 @@ cpu0: cpu@0 {
device_type = "cpu";
reg = <0>;
enable-method = "psci";
- power-domains = <&CPU_PD0>;
+ power-domains = <&cpu0_pd>;
power-domain-names = "psci";
};
@@ -155,25 +155,25 @@ v2m0: v2m@48090000 {
d1_pd: power-domain-d1 {
compatible = "st,stm32mp-pm-domain";
#power-domain-cells = <0>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&cluster_pd>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
- CPU_PD0: power-domain-cpu0 {
+ cpu0_pd: power-domain-cpu0 {
#power-domain-cells = <0>;
domain-idle-states = <&cpu_sleep>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&cluster_pd>;
};
- CLUSTER_PD: power-domain-cluster {
+ cluster_pd: power-domain-cluster {
#power-domain-cells = <0>;
- power-domains = <&RET_PD>;
+ power-domains = <&ret_pd>;
};
- RET_PD: power-domain-retention {
+ ret_pd: power-domain-retention {
#power-domain-cells = <0>;
};
};
@@ -215,7 +215,7 @@ hpdma: dma-controller@40400000 {
<GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scmi_clk CK_SCMI_HPDMA1>;
- power-domains = <&RET_PD>;
+ power-domains = <&ret_pd>;
#dma-cells = <3>;
};
@@ -239,7 +239,7 @@ hpdma2: dma-controller@40410000 {
<GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scmi_clk CK_SCMI_HPDMA2>;
- power-domains = <&RET_PD>;
+ power-domains = <&ret_pd>;
#dma-cells = <3>;
};
@@ -263,7 +263,7 @@ hpdma3: dma-controller@40420000 {
<GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scmi_clk CK_SCMI_HPDMA3>;
- power-domains = <&RET_PD>;
+ power-domains = <&ret_pd>;
#dma-cells = <3>;
};
@@ -605,7 +605,7 @@ lptimer1: timer@40090000 {
#address-cells = <1>;
#size-cells = <0>;
access-controllers = <&rifsc 17>;
- power-domains = <&RET_PD>;
+ power-domains = <&ret_pd>;
wakeup-source;
status = "disabled";
@@ -641,7 +641,7 @@ lptimer2: timer@400a0000 {
#address-cells = <1>;
#size-cells = <0>;
access-controllers = <&rifsc 18>;
- power-domains = <&RET_PD>;
+ power-domains = <&ret_pd>;
wakeup-source;
status = "disabled";
diff --git a/arch/arm64/boot/dts/st/stm32mp253.dtsi b/arch/arm64/boot/dts/st/stm32mp253.dtsi
index 8562f13e5284..7df1031b7e91 100644
--- a/arch/arm64/boot/dts/st/stm32mp253.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp253.dtsi
@@ -12,7 +12,7 @@ cpu1: cpu@1 {
device_type = "cpu";
reg = <1>;
enable-method = "psci";
- power-domains = <&CPU_PD1>;
+ power-domains = <&cpu1_pd>;
power-domain-names = "psci";
};
};
@@ -24,10 +24,10 @@ arm-pmu {
};
psci {
- CPU_PD1: power-domain-cpu1 {
+ cpu1_pd: power-domain-cpu1 {
#power-domain-cells = <0>;
domain-idle-states = <&cpu_sleep>;
- power-domains = <&CLUSTER_PD>;
+ power-domains = <&cluster_pd>;
};
};
--
2.43.0
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH 6/7] arm64: dts: st: add D1 domain for STM32MP23 family
2026-11-04 13:55 [PATCH 0/7] arm64: dts: st: add STM32MP2 power domains Patrick Delaunay
` (4 preceding siblings ...)
2026-11-04 13:55 ` [PATCH 5/7] arm64: dts: st: fix power-domain labels DT coding style in STM32MP25 Patrick Delaunay
@ 2026-11-04 13:55 ` Patrick Delaunay
2026-11-04 13:55 ` [PATCH 7/7] arm64: dts: st: add power domains for STM32MP21 family Patrick Delaunay
2026-11-14 10:34 ` [PATCH 0/7] arm64: dts: st: add STM32MP2 power domains Ulf Hansson
7 siblings, 0 replies; 12+ messages in thread
From: Patrick Delaunay @ 2026-11-04 13:55 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Maxime Coquelin,
Alexandre Torgue
Cc: Linux STM32, Patrick Delaunay, devicetree, linux-arm-kernel,
linux-kernel
Add the D1 power domain for devices that require the Cortex-A35
cluster to remain in Run1. Keep S2Idle wake-up handling on the
EXTI1/ret_pd path.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---
arch/arm64/boot/dts/st/stm32mp231.dtsi | 54 ++++++++++++++++++--------
arch/arm64/boot/dts/st/stm32mp233.dtsi | 1 +
arch/arm64/boot/dts/st/stm32mp235.dtsi | 2 +-
3 files changed, 40 insertions(+), 17 deletions(-)
diff --git a/arch/arm64/boot/dts/st/stm32mp231.dtsi b/arch/arm64/boot/dts/st/stm32mp231.dtsi
index 27231e140fbb..4075a9cf1d36 100644
--- a/arch/arm64/boot/dts/st/stm32mp231.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp231.dtsi
@@ -130,6 +130,12 @@ scmi_vdda18adc: regulator@7 {
};
};
+ d1_pd: power-domain-d1 {
+ compatible = "st,stm32mp-pm-domain";
+ #power-domain-cells = <0>;
+ power-domains = <&cluster_pd>;
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
@@ -187,6 +193,7 @@ hpdma: dma-controller@40400000 {
<GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scmi_clk CK_SCMI_HPDMA1>;
+ power-domains = <&ret_pd>;
#dma-cells = <3>;
};
@@ -210,6 +217,7 @@ hpdma2: dma-controller@40410000 {
<GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scmi_clk CK_SCMI_HPDMA2>;
+ power-domains = <&ret_pd>;
#dma-cells = <3>;
};
@@ -233,6 +241,7 @@ hpdma3: dma-controller@40420000 {
<GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scmi_clk CK_SCMI_HPDMA3>;
+ power-domains = <&ret_pd>;
#dma-cells = <3>;
};
@@ -251,7 +260,7 @@ ommanager: ommanager@40500000 {
<&scmi_reset RST_SCMI_OSPI2>;
reset-names = "omm", "ospi1", "ospi2";
access-controllers = <&rifsc 111>;
- power-domains = <&cluster_pd>;
+ power-domains = <&d1_pd>;
#address-cells = <2>;
#size-cells = <1>;
st,syscfg-amcr = <&syscfg 0x2c00 0x7>;
@@ -268,7 +277,7 @@ ospi1: spi@0 {
resets = <&scmi_reset RST_SCMI_OSPI1>,
<&scmi_reset RST_SCMI_OSPI1DLL>;
access-controllers = <&rifsc 74>;
- power-domains = <&cluster_pd>;
+ power-domains = <&d1_pd>;
st,syscfg-dlyb = <&syscfg 0x1000>;
status = "disabled";
};
@@ -284,7 +293,7 @@ ospi2: spi@1 {
resets = <&scmi_reset RST_SCMI_OSPI2>,
<&scmi_reset RST_SCMI_OSPI2DLL>;
access-controllers = <&rifsc 75>;
- power-domains = <&cluster_pd>;
+ power-domains = <&d1_pd>;
st,syscfg-dlyb = <&syscfg 0x1400>;
status = "disabled";
};
@@ -325,7 +334,7 @@ spi2: spi@400b0000 {
<&hpdma 52 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 23>;
- power-domains = <&cluster_pd>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -356,7 +365,7 @@ spi3: spi@400c0000 {
<&hpdma 54 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 24>;
- power-domains = <&cluster_pd>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -383,6 +392,7 @@ usart2: serial@400e0000 {
<&hpdma 12 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 32>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -395,6 +405,7 @@ usart3: serial@400f0000 {
<&hpdma 14 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 33>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -407,6 +418,7 @@ uart4: serial@40100000 {
<&hpdma 16 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 34>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -419,6 +431,7 @@ uart5: serial@40110000 {
<&hpdma 18 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 35>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -435,7 +448,7 @@ i2c1: i2c@40120000 {
<&hpdma 28 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 41>;
- power-domains = <&cluster_pd>;
+ power-domains = <&d1_pd>;
i2c-analog-filter;
wakeup-source;
status = "disabled";
@@ -454,7 +467,7 @@ i2c2: i2c@40130000 {
<&hpdma 31 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 42>;
- power-domains = <&cluster_pd>;
+ power-domains = <&d1_pd>;
i2c-analog-filter;
wakeup-source;
status = "disabled";
@@ -473,7 +486,7 @@ i2c7: i2c@40180000 {
<&hpdma 46 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 47>;
- power-domains = <&cluster_pd>;
+ power-domains = <&d1_pd>;
i2c-analog-filter;
wakeup-source;
status = "disabled";
@@ -488,6 +501,7 @@ usart6: serial@40220000 {
<&hpdma 20 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 36>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -518,7 +532,7 @@ spi1: spi@40230000 {
<&hpdma 50 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 22>;
- power-domains = <&cluster_pd>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -534,7 +548,7 @@ spi4: spi@40240000 {
<&hpdma 56 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 25>;
- power-domains = <&cluster_pd>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -550,7 +564,7 @@ spi5: spi@40280000 {
<&hpdma 58 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 26>;
- power-domains = <&cluster_pd>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -665,6 +679,7 @@ usart1: serial@40330000 {
<&hpdma 10 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 31>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -711,6 +726,7 @@ uart7: serial@40370000 {
<&hpdma 22 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 37>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -724,7 +740,7 @@ dcmi: dcmi@404a0000 {
dmas = <&hpdma 137 0x60 0x00003012>;
dma-names = "tx";
access-controllers = <&rifsc 88>;
- power-domains = <&cluster_pd>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -750,6 +766,7 @@ spi8: spi@46020000 {
<&hpdma 172 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 29>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -766,7 +783,7 @@ i2c8: i2c@46040000 {
<&hpdma 169 0x20 0x3021>;
dma-names = "rx", "tx";
access-controllers = <&rifsc 48>;
- power-domains = <&cluster_pd>;
+ power-domains = <&d1_pd>;
i2c-analog-filter;
wakeup-source;
status = "disabled";
@@ -781,7 +798,7 @@ csi: csi@48020000 {
<&rcc CK_KER_CSIPHY>;
clock-names = "pclk", "txesc", "csi2phy";
access-controllers = <&rifsc 86>;
- power-domains = <&cluster_pd>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -793,7 +810,7 @@ dcmipp: dcmipp@48030000 {
clocks = <&rcc CK_BUS_DCMIPP>, <&rcc CK_KER_CSI>;
clock-names = "kclk", "mclk";
access-controllers = <&rifsc 87>;
- power-domains = <&cluster_pd>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -809,7 +826,7 @@ sdmmc1: mmc@48220000 {
cap-mmc-highspeed;
max-frequency = <120000000>;
access-controllers = <&rifsc 76>;
- power-domains = <&cluster_pd>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -825,6 +842,7 @@ sdmmc2: mmc@48230000 {
cap-mmc-highspeed;
max-frequency = <166000000>;
access-controllers = <&rifsc 77>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -840,6 +858,7 @@ sdmmc3: mmc@48240000 {
cap-mmc-highspeed;
max-frequency = <166000000>;
access-controllers = <&rifsc 78>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
@@ -869,6 +888,7 @@ ethernet1: ethernet@482c0000 {
snps,tso;
st,syscon = <&syscfg 0x3000>;
access-controllers = <&rifsc 60>;
+ power-domains = <&d1_pd>;
status = "disabled";
mtl_rx_setup_1: rx-queues-config {
@@ -900,6 +920,7 @@ usbh_ohci: usb@482e0000 {
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb2_phy1>;
phy-names = "usb";
+ power-domains = <&d1_pd>;
resets = <&rcc USBH_R>;
status = "disabled";
};
@@ -913,6 +934,7 @@ usbh_ehci: usb@482f0000 {
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb2_phy1>;
phy-names = "usb";
+ power-domains = <&d1_pd>;
resets = <&rcc USBH_R>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/st/stm32mp233.dtsi b/arch/arm64/boot/dts/st/stm32mp233.dtsi
index cebefd99906f..3fa91f7f2762 100644
--- a/arch/arm64/boot/dts/st/stm32mp233.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp233.dtsi
@@ -70,6 +70,7 @@ ethernet2: ethernet@482d0000 {
snps,tso;
st,syscon = <&syscfg 0x3400>;
access-controllers = <&rifsc 61>;
+ power-domains = <&d1_pd>;
status = "disabled";
mtl_rx_setup_2: rx-queues-config {
diff --git a/arch/arm64/boot/dts/st/stm32mp235.dtsi b/arch/arm64/boot/dts/st/stm32mp235.dtsi
index 7a87c344a4fe..561b12ba74eb 100644
--- a/arch/arm64/boot/dts/st/stm32mp235.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp235.dtsi
@@ -20,7 +20,7 @@ lvds: lvds@48060000 {
clock-names = "pclk", "ref";
resets = <&rcc LVDS_R>;
access-controllers = <&rifsc 84>;
- power-domains = <&cluster_pd>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
--
2.43.0
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH 7/7] arm64: dts: st: add power domains for STM32MP21 family
2026-11-04 13:55 [PATCH 0/7] arm64: dts: st: add STM32MP2 power domains Patrick Delaunay
` (5 preceding siblings ...)
2026-11-04 13:55 ` [PATCH 6/7] arm64: dts: st: add D1 domain for STM32MP23 family Patrick Delaunay
@ 2026-11-04 13:55 ` Patrick Delaunay
2026-11-14 10:34 ` [PATCH 0/7] arm64: dts: st: add STM32MP2 power domains Ulf Hansson
7 siblings, 0 replies; 12+ messages in thread
From: Patrick Delaunay @ 2026-11-04 13:55 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Maxime Coquelin,
Alexandre Torgue
Cc: Linux STM32, Patrick Delaunay, devicetree, linux-arm-kernel,
linux-kernel
Add the PSCI power domain for STM32MP21 family on CPU and cluster,
and the D1 power domain for devices that require the Cortex-A35
cluster to remain in Run1. The wake-up handling is only managed
by the PSCI power domain with EXTI.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---
arch/arm64/boot/dts/st/stm32mp211.dtsi | 37 ++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/arch/arm64/boot/dts/st/stm32mp211.dtsi b/arch/arm64/boot/dts/st/stm32mp211.dtsi
index 4bfd58b26b51..aad7c87dc8ca 100644
--- a/arch/arm64/boot/dts/st/stm32mp211.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp211.dtsi
@@ -18,6 +18,21 @@ cpu0: cpu@0 {
reg = <0>;
device_type = "cpu";
enable-method = "psci";
+ power-domains = <&cpu0_pd>;
+ power-domain-names = "psci";
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ cpu_sleep: cpu-sleep {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x00000002>;
+ local-timer-stop;
+ entry-latency-us = <150>;
+ exit-latency-us = <200>;
+ min-residency-us = <1000>;
+ };
};
};
@@ -70,9 +85,30 @@ scmi_reset: protocol@16 {
};
};
+ d1_pd: power-domain-d1 {
+ compatible = "st,stm32mp-pm-domain";
+ #power-domain-cells = <0>;
+ power-domains = <&cluster_pd>;
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
+
+ cpu0_pd: power-domain-cpu0 {
+ #power-domain-cells = <0>;
+ domain-idle-states = <&cpu_sleep>;
+ power-domains = <&cluster_pd>;
+ };
+
+ cluster_pd: power-domain-cluster {
+ #power-domain-cells = <0>;
+ power-domains = <&ret_pd>;
+ };
+
+ ret_pd: power-domain-retention {
+ #power-domain-cells = <0>;
+ };
};
timer {
@@ -108,6 +144,7 @@ usart2: serial@400e0000 {
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ck_flexgen_08>;
access-controllers = <&rifsc 32>;
+ power-domains = <&d1_pd>;
status = "disabled";
};
};
--
2.43.0
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH 0/7] arm64: dts: st: add STM32MP2 power domains
2026-11-04 13:55 [PATCH 0/7] arm64: dts: st: add STM32MP2 power domains Patrick Delaunay
` (6 preceding siblings ...)
2026-11-04 13:55 ` [PATCH 7/7] arm64: dts: st: add power domains for STM32MP21 family Patrick Delaunay
@ 2026-11-14 10:34 ` Ulf Hansson
7 siblings, 0 replies; 12+ messages in thread
From: Ulf Hansson @ 2026-11-14 10:34 UTC (permalink / raw)
To: Patrick Delaunay
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Maxime Coquelin,
Alexandre Torgue, Ulf Hansson, Linux STM32, devicetree,
linux-arm-kernel, linux-kernel, linux-pm
On Wed, Nov 4, 2026 at 3:02 PM Patrick Delaunay
<patrick.delaunay@foss.st.com> wrote:
>
>
> Hello,
>
> This series adds support for the D1 power domain used by the STM32MP2
> families.
>
> The new power-domain driver uses runtime PM and the clock framework to
> keep the Cortex-A35 cluster in Run1 for devices that require it, while
> S2Idle wake-up is handled through EXTI1 and retention PSCI power domain
> (RET_PD).
>
> The power sub-domain D1 without GENPD_FLAG_ACTIVE_WAKEUP is required
> because PSCI domains manage the wake-up path since the commit
> bfd5859709ee ("cpuidle: psci: Activate GENPD_FLAG_ACTIVE_WAKEUP with
> OSI").
>
> This patch is a preliminary step to support PSCI OSI in STM32MP2
> platform and the same power domain will be used also in STM32MP1
> series.
>
> The first 3 patches introduce the new power domain drivers.
>
> The next patches add this power domain in device tree for each STM32MP2
> SoCs: STM32MP25, STM32MP23 and STM32MP21.
>
> Regards,
> Patrick
>
>
> Patrick Delaunay (7):
> dt-bindings: power: st: add STM32MP PM domain binding
> pmdomain: st: add STM32MP power domain
> MAINTAINERS: add entry for ST STM32 power domain driver
> arm64: dts: st: add D1 domain for STM32MP25 family
> arm64: dts: st: fix power-domain labels DT coding style in STM32MP25
> arm64: dts: st: add D1 domain for STM32MP23 family
> arm64: dts: st: add power domains for STM32MP21 family
>
> .../bindings/power/st,stm32mp-pm-domain.yaml | 46 +++++++
> MAINTAINERS | 7 +
> arch/arm64/boot/dts/st/stm32mp211.dtsi | 37 +++++
> arch/arm64/boot/dts/st/stm32mp231.dtsi | 54 +++++---
> arch/arm64/boot/dts/st/stm32mp233.dtsi | 1 +
> arch/arm64/boot/dts/st/stm32mp235.dtsi | 2 +-
> arch/arm64/boot/dts/st/stm32mp251.dtsi | 126 ++++++++++-------
> arch/arm64/boot/dts/st/stm32mp253.dtsi | 9 +-
> arch/arm64/boot/dts/st/stm32mp255.dtsi | 2 +-
> drivers/pmdomain/st/Kconfig | 14 ++
> drivers/pmdomain/st/Makefile | 1 +
> drivers/pmdomain/st/stm32mp-pm-domain.c | 128 ++++++++++++++++++
> 12 files changed, 353 insertions(+), 74 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/power/st,stm32mp-pm-domain.yaml
> create mode 100644 drivers/pmdomain/st/stm32mp-pm-domain.c
>
> ---
> base-commit: 7b3f3e772d5107c3a59b9f2278e9aeab227b26db
> branch: master
>
> --
> 2.43.0
>
Please re-submit this so all patches are sent to me and linx-pm,
including the dt patches.
Kind regards
Uffe
^ permalink raw reply [flat|nested] 12+ messages in thread