From: "Nuno Sá" <noname.nuno@gmail.com>
To: Dumitru Ceclan <mitrutzceclan@gmail.com>,
Lars-Peter Clausen <lars@metafoo.de>,
Michael Hennerich <Michael.Hennerich@analog.com>,
Jonathan Cameron <jic23@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: mitrutz_ceclan@gmail.com, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Dumitru Ceclan <dumitru.ceclan@analog.com>
Subject: Re: [PATCH 2/2] iio: adc: ad7173: add support for ad4113
Date: Thu, 08 Aug 2024 13:56:53 +0200 [thread overview]
Message-ID: <cea14e0a676de59b403185710782a50b1caf6616.camel@gmail.com> (raw)
In-Reply-To: <20240807-ad4113-v1-2-2d338f702c7b@analog.com>
On Wed, 2024-08-07 at 17:58 +0300, Dumitru Ceclan wrote:
> This commit adds support for the AD4113 ADC.
> The AD4113 is a low power, low noise, 16-bit, Σ-Δ analog-to-digital
> converter (ADC) that integrates an analog front end (AFE) for four
> fully differential or eight single-ended inputs.
>
> Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
> ---
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
> drivers/iio/adc/ad7173.c | 22 +++++++++++++++++++++-
> 1 file changed, 21 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c
> index a854f2d30174..82b63f9705b3 100644
> --- a/drivers/iio/adc/ad7173.c
> +++ b/drivers/iio/adc/ad7173.c
> @@ -3,7 +3,7 @@
> * AD717x and AD411x family SPI ADC driver
> *
> * Supported devices:
> - * AD4111/AD4112/AD4114/AD4115/AD4116
> + * AD4111/AD4112/AD4113/AD4114/AD4115/AD4116
> * AD7172-2/AD7172-4/AD7173-8/AD7175-2
> * AD7175-8/AD7176-2/AD7177-2
> *
> @@ -84,6 +84,7 @@
> #define AD4111_ID AD7173_ID
> #define AD4112_ID AD7173_ID
> #define AD4114_ID AD7173_ID
> +#define AD4113_ID 0x31D0
> #define AD4116_ID 0x34d0
> #define AD4115_ID 0x38d0
> #define AD7175_8_ID 0x3cd0
> @@ -294,6 +295,23 @@ static const struct ad7173_device_info ad4112_device_info
> = {
> .num_sinc5_data_rates = ARRAY_SIZE(ad7173_sinc5_data_rates),
> };
>
> +static const struct ad7173_device_info ad4113_device_info = {
> + .name = "ad4113",
> + .id = AD4113_ID,
> + .num_voltage_in_div = 8,
> + .num_channels = 16,
> + .num_configs = 8,
> + .num_voltage_in = 8,
> + .num_gpios = 2,
> + .higher_gpio_bits = true,
> + .has_vincom_input = true,
> + .has_input_buf = true,
> + .has_int_ref = true,
> + .clock = 2 * HZ_PER_MHZ,
> + .sinc5_data_rates = ad7173_sinc5_data_rates,
> + .num_sinc5_data_rates = ARRAY_SIZE(ad7173_sinc5_data_rates),
> +};
> +
> static const struct ad7173_device_info ad4114_device_info = {
> .name = "ad4114",
> .id = AD4114_ID,
> @@ -1437,6 +1455,7 @@ static int ad7173_probe(struct spi_device *spi)
> static const struct of_device_id ad7173_of_match[] = {
> { .compatible = "adi,ad4111", .data = &ad4111_device_info },
> { .compatible = "adi,ad4112", .data = &ad4112_device_info },
> + { .compatible = "adi,ad4113", .data = &ad4113_device_info },
> { .compatible = "adi,ad4114", .data = &ad4114_device_info },
> { .compatible = "adi,ad4115", .data = &ad4115_device_info },
> { .compatible = "adi,ad4116", .data = &ad4116_device_info },
> @@ -1454,6 +1473,7 @@ MODULE_DEVICE_TABLE(of, ad7173_of_match);
> static const struct spi_device_id ad7173_id_table[] = {
> { "ad4111", (kernel_ulong_t)&ad4111_device_info },
> { "ad4112", (kernel_ulong_t)&ad4112_device_info },
> + { "ad4113", (kernel_ulong_t)&ad4113_device_info },
> { "ad4114", (kernel_ulong_t)&ad4114_device_info },
> { "ad4115", (kernel_ulong_t)&ad4115_device_info },
> { "ad4116", (kernel_ulong_t)&ad4116_device_info },
>
prev parent reply other threads:[~2024-08-08 11:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-07 14:58 [PATCH 0/2] Add support for AD4113 Dumitru Ceclan
2024-08-07 14:58 ` [PATCH 1/2] dt-bindings: adc: ad7173: add support for ad4113 Dumitru Ceclan
2024-08-07 16:31 ` Conor Dooley
2024-08-07 14:58 ` [PATCH 2/2] iio: " Dumitru Ceclan
2024-08-08 11:56 ` Nuno Sá [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cea14e0a676de59b403185710782a50b1caf6616.camel@gmail.com \
--to=noname.nuno@gmail.com \
--cc=Michael.Hennerich@analog.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dumitru.ceclan@analog.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mitrutz_ceclan@gmail.com \
--cc=mitrutzceclan@gmail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®