[V5,00/13] Fixes to pcie-tegra194 driver

[V5,00/13] Fixes to pcie-tegra194 driver

[Manikanta Maddireddy]

This series[1] was originally posted by Vidya Sagar, and I have rebased
it onto 6.19.0-rc6-next. I addressed review comments and split this into
two series, one for fixes(current) and the other is for enhancements.
I verified these patches on Jetson AGX Orin(Tegra234 SoC).

I added below four new patches to fix bugs, commit message of each
patch has the details on the bug and fix.
 - PCI: tegra194: Use HW version number
 - PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
 - PCI: tegra194: Disable PERST IRQ only in Endpoint mode 

Rest of the patches are same as the original V3 series, just rebased them on
6.19.0-rc6-next.

Verification details.
 - I verified both Root port and Endpoint mode controllers on Tegra234 SoC.
 - Basic sanity Link up, configuration space access and BAR access are verified.
 - I verified that ASPM L1.2 capability is disabled for Endpoint mode.
 - I verified suspend to RAM tests with Endpoint mode.

[1] https://patchwork.kernel.org/project/linux-pci/patch/20221013183854.21087-1-vidyas@nvidia.com/

Manikanta Maddireddy (3):
  PCI: tegra194: Use HW version number
  PCI: tegra194: Fix CBB timeout caused by DBI access before core
    power-on
  PCI: tegra194: Disable PERST IRQ only in Endpoint mode

Vidya Sagar (10):
  PCI: tegra194: Fix polling delay for L2 state
  PCI: tegra194: Refactor LTSSM state polling on surprise down
  PCI: tegra194: Don't force the device into the D0 state before L2
  PCI: tegra194: Free up EP resources during remove()
  PCI: tegra194: Disable direct speed change for EP
  PCI: tegra194: Use devm_gpiod_get_optional() to parse
    "nvidia,refclk-select"
  PCI: tegra194: Apply pinctrl settings for both PCIe RP and EP
  PCI: tegra194: Free resources during controller deinitialization
  PCI: tegra194: Allow system suspend when the Endpoint link is not up
  PCI: tegra194: Set LTR message request before PCIe link up

 drivers/pci/controller/dwc/pcie-designware.c |   2 +-
 drivers/pci/controller/dwc/pcie-designware.h |   2 +
 drivers/pci/controller/dwc/pcie-tegra194.c   | 191 +++++++++----------
 3 files changed, 95 insertions(+), 100 deletions(-)

-- 
2.34.1

[V5,01/13] PCI: tegra194: Fix polling delay for L2 state

[Manikanta Maddireddy]

From: Vidya Sagar <vidyas@nvidia.com>

As per PCIe spec r6.0, sec 5.3.3.2.1, after sending PME_Turn_Off message,
Root port should wait for 1~10 msec for PME_TO_Ack message. Currently,
driver is polling for 10 msec with 1 usec delay which is aggressive.
Change it to 10 msec polling with 100 usec delay. Since this function
is used in non-atomic context only, use non-atomic poll function.

Fixes: 56e15a238d92 ("PCI: tegra: Add Tegra194 PCIe support")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
---
V5:
* None

V4:
* None

V3:
* None

V2:
* None

 drivers/pci/controller/dwc/pcie-tegra194.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 0ddeef70726d..96d38571a7e7 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -198,7 +198,8 @@
 #define CAP_SPCIE_CAP_OFF_USP_TX_PRESET0_MASK	GENMASK(11, 8)
 #define CAP_SPCIE_CAP_OFF_USP_TX_PRESET0_SHIFT	8
 
-#define PME_ACK_TIMEOUT 10000
+#define PME_ACK_DELAY		100   /* 100 us */
+#define PME_ACK_TIMEOUT		10000 /* 10 ms */
 
 #define LTSSM_TIMEOUT 50000	/* 50ms */
 
@@ -1553,9 +1554,9 @@ static int tegra_pcie_try_link_l2(struct tegra_pcie_dw *pcie)
 	val |= APPL_PM_XMT_TURNOFF_STATE;
 	appl_writel(pcie, val, APPL_RADM_STATUS);
 
-	return readl_poll_timeout_atomic(pcie->appl_base + APPL_DEBUG, val,
-				 val & APPL_DEBUG_PM_LINKST_IN_L2_LAT,
-				 1, PME_ACK_TIMEOUT);
+	return readl_poll_timeout(pcie->appl_base + APPL_DEBUG, val,
+				  val & APPL_DEBUG_PM_LINKST_IN_L2_LAT,
+				  PME_ACK_DELAY, PME_ACK_TIMEOUT);
 }
 
 static void tegra_pcie_dw_pme_turnoff(struct tegra_pcie_dw *pcie)
-- 
2.34.1

[V5,02/13] PCI: tegra194: Refactor LTSSM state polling on surprise down

[Manikanta Maddireddy]

From: Vidya Sagar <vidyas@nvidia.com>

On surprise down, LTSSM state transits from L0 -> Recovery.RcvrLock ->
Recovery.RcvrSpeed -> Gen1 Recovery.RcvrLock -> Detect. Recovery.RcvrLock
and Recovery.RcvrSpeed transit times are 24 msec and 48 msec respectively.
So, the total time taken to transit from L0 to detect state is ~96 msec.
Hence, increase the poll time to 120 msec.

Disable the LTSSM state after it transits to detect to avoid LTSSM
toggling between polling and detect states.

tegra_pcie_dw_pme_turnoff() function is called in non-atomic context
only, so use the non-atomic poll function.

Fixes: 56e15a238d92 ("PCI: tegra: Add Tegra194 PCIe support")
Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
---
V5:
* None

V4:
* None

V3:
* None

V2:
* None

 drivers/pci/controller/dwc/pcie-tegra194.c | 55 +++++++++++++---------
 1 file changed, 32 insertions(+), 23 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 96d38571a7e7..4ac6b1cea13f 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -137,7 +137,11 @@
 #define APPL_DEBUG_PM_LINKST_IN_L0		0x11
 #define APPL_DEBUG_LTSSM_STATE_MASK		GENMASK(8, 3)
 #define APPL_DEBUG_LTSSM_STATE_SHIFT		3
-#define LTSSM_STATE_PRE_DETECT			5
+#define LTSSM_STATE_DETECT_QUIET		0x00
+#define LTSSM_STATE_DETECT_ACT			0x08
+#define LTSSM_STATE_PRE_DETECT_QUIET		0x28
+#define LTSSM_STATE_DETECT_WAIT			0x30
+#define LTSSM_STATE_L2_IDLE			0xa8
 
 #define APPL_RADM_STATUS			0xE4
 #define APPL_PM_XMT_TURNOFF_STATE		BIT(0)
@@ -201,7 +205,8 @@
 #define PME_ACK_DELAY		100   /* 100 us */
 #define PME_ACK_TIMEOUT		10000 /* 10 ms */
 
-#define LTSSM_TIMEOUT 50000	/* 50ms */
+#define LTSSM_DELAY		10000	/* 10 ms */
+#define LTSSM_TIMEOUT		120000	/* 120 ms */
 
 #define GEN3_GEN4_EQ_PRESET_INIT	5
 
@@ -1591,23 +1596,22 @@ static void tegra_pcie_dw_pme_turnoff(struct tegra_pcie_dw *pcie)
 		data &= ~APPL_PINMUX_PEX_RST;
 		appl_writel(pcie, data, APPL_PINMUX);
 
+		err = readl_poll_timeout(pcie->appl_base + APPL_DEBUG, data,
+			((data & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_QUIET) ||
+			((data & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_ACT) ||
+			((data & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_PRE_DETECT_QUIET) ||
+			((data & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_WAIT),
+			LTSSM_DELAY, LTSSM_TIMEOUT);
+		if (err)
+			dev_info(pcie->dev, "Link didn't go to detect state\n");
+
 		/*
-		 * Some cards do not go to detect state even after de-asserting
-		 * PERST#. So, de-assert LTSSM to bring link to detect state.
+		 * Deassert LTSSM state to stop the state toggling between
+		 * polling and detect.
 		 */
 		data = readl(pcie->appl_base + APPL_CTRL);
 		data &= ~APPL_CTRL_LTSSM_EN;
 		writel(data, pcie->appl_base + APPL_CTRL);
-
-		err = readl_poll_timeout_atomic(pcie->appl_base + APPL_DEBUG,
-						data,
-						((data &
-						APPL_DEBUG_LTSSM_STATE_MASK) >>
-						APPL_DEBUG_LTSSM_STATE_SHIFT) ==
-						LTSSM_STATE_PRE_DETECT,
-						1, LTSSM_TIMEOUT);
-		if (err)
-			dev_info(pcie->dev, "Link didn't go to detect state\n");
 	}
 	/*
 	 * DBI registers may not be accessible after this as PLL-E would be
@@ -1681,19 +1685,24 @@ static void pex_ep_event_pex_rst_assert(struct tegra_pcie_dw *pcie)
 	if (pcie->ep_state == EP_STATE_DISABLED)
 		return;
 
-	/* Disable LTSSM */
+	ret = readl_poll_timeout(pcie->appl_base + APPL_DEBUG, val,
+		((val & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_QUIET) ||
+		((val & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_ACT) ||
+		((val & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_PRE_DETECT_QUIET) ||
+		((val & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_WAIT) ||
+		((val & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_L2_IDLE),
+		LTSSM_DELAY, LTSSM_TIMEOUT);
+	if (ret)
+		dev_err(pcie->dev, "LTSSM state: 0x%x timeout: %d\n", val, ret);
+
+	/*
+	 * Deassert LTSSM state to stop the state toggling between
+	 * polling and detect.
+	 */
 	val = appl_readl(pcie, APPL_CTRL);
 	val &= ~APPL_CTRL_LTSSM_EN;
 	appl_writel(pcie, val, APPL_CTRL);
 
-	ret = readl_poll_timeout(pcie->appl_base + APPL_DEBUG, val,
-				 ((val & APPL_DEBUG_LTSSM_STATE_MASK) >>
-				 APPL_DEBUG_LTSSM_STATE_SHIFT) ==
-				 LTSSM_STATE_PRE_DETECT,
-				 1, LTSSM_TIMEOUT);
-	if (ret)
-		dev_err(pcie->dev, "Failed to go Detect state: %d\n", ret);
-
 	reset_control_assert(pcie->core_rst);
 
 	tegra_pcie_disable_phy(pcie);
-- 
2.34.1

Re: [V5,02/13] PCI: tegra194: Refactor LTSSM state polling on surprise down

[Jon Hunter]

On 08/02/2026 18:07, Manikanta Maddireddy wrote:
> From: Vidya Sagar <vidyas@nvidia.com>
> 
> On surprise down, LTSSM state transits from L0 -> Recovery.RcvrLock ->
> Recovery.RcvrSpeed -> Gen1 Recovery.RcvrLock -> Detect. Recovery.RcvrLock
> and Recovery.RcvrSpeed transit times are 24 msec and 48 msec respectively.
> So, the total time taken to transit from L0 to detect state is ~96 msec.
> Hence, increase the poll time to 120 msec.
> 
> Disable the LTSSM state after it transits to detect to avoid LTSSM
> toggling between polling and detect states.
> 
> tegra_pcie_dw_pme_turnoff() function is called in non-atomic context
> only, so use the non-atomic poll function.
> 
> Fixes: 56e15a238d92 ("PCI: tegra: Add Tegra194 PCIe support")
> Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")

Two fixes tags here, we should only have one.

> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
> Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
> ---
> V5:
> * None
> 
> V4:
> * None
> 
> V3:
> * None
> 
> V2:
> * None
> 
>   drivers/pci/controller/dwc/pcie-tegra194.c | 55 +++++++++++++---------
>   1 file changed, 32 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
> index 96d38571a7e7..4ac6b1cea13f 100644
> --- a/drivers/pci/controller/dwc/pcie-tegra194.c
> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
> @@ -137,7 +137,11 @@
>   #define APPL_DEBUG_PM_LINKST_IN_L0		0x11
>   #define APPL_DEBUG_LTSSM_STATE_MASK		GENMASK(8, 3)
>   #define APPL_DEBUG_LTSSM_STATE_SHIFT		3
> -#define LTSSM_STATE_PRE_DETECT			5
> +#define LTSSM_STATE_DETECT_QUIET		0x00
> +#define LTSSM_STATE_DETECT_ACT			0x08
> +#define LTSSM_STATE_PRE_DETECT_QUIET		0x28
> +#define LTSSM_STATE_DETECT_WAIT			0x30
> +#define LTSSM_STATE_L2_IDLE			0xa8
>   
>   #define APPL_RADM_STATUS			0xE4
>   #define APPL_PM_XMT_TURNOFF_STATE		BIT(0)
> @@ -201,7 +205,8 @@
>   #define PME_ACK_DELAY		100   /* 100 us */
>   #define PME_ACK_TIMEOUT		10000 /* 10 ms */
>   
> -#define LTSSM_TIMEOUT 50000	/* 50ms */
> +#define LTSSM_DELAY		10000	/* 10 ms */
> +#define LTSSM_TIMEOUT		120000	/* 120 ms */
>   
>   #define GEN3_GEN4_EQ_PRESET_INIT	5
>   
> @@ -1591,23 +1596,22 @@ static void tegra_pcie_dw_pme_turnoff(struct tegra_pcie_dw *pcie)
>   		data &= ~APPL_PINMUX_PEX_RST;
>   		appl_writel(pcie, data, APPL_PINMUX);
>   
> +		err = readl_poll_timeout(pcie->appl_base + APPL_DEBUG, data,
> +			((data & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_QUIET) ||
> +			((data & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_ACT) ||
> +			((data & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_PRE_DETECT_QUIET) ||
> +			((data & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_WAIT),
> +			LTSSM_DELAY, LTSSM_TIMEOUT);
> +		if (err)
> +			dev_info(pcie->dev, "Link didn't go to detect state\n");
> +
>   		/*
> -		 * Some cards do not go to detect state even after de-asserting
> -		 * PERST#. So, de-assert LTSSM to bring link to detect state.
> +		 * Deassert LTSSM state to stop the state toggling between
> +		 * polling and detect.
>   		 */
>   		data = readl(pcie->appl_base + APPL_CTRL);
>   		data &= ~APPL_CTRL_LTSSM_EN;
>   		writel(data, pcie->appl_base + APPL_CTRL);
> -
> -		err = readl_poll_timeout_atomic(pcie->appl_base + APPL_DEBUG,
> -						data,
> -						((data &
> -						APPL_DEBUG_LTSSM_STATE_MASK) >>
> -						APPL_DEBUG_LTSSM_STATE_SHIFT) ==
> -						LTSSM_STATE_PRE_DETECT,
> -						1, LTSSM_TIMEOUT);
> -		if (err)
> -			dev_info(pcie->dev, "Link didn't go to detect state\n");
>   	}
>   	/*
>   	 * DBI registers may not be accessible after this as PLL-E would be
> @@ -1681,19 +1685,24 @@ static void pex_ep_event_pex_rst_assert(struct tegra_pcie_dw *pcie)
>   	if (pcie->ep_state == EP_STATE_DISABLED)
>   		return;
>   
> -	/* Disable LTSSM */
> +	ret = readl_poll_timeout(pcie->appl_base + APPL_DEBUG, val,
> +		((val & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_QUIET) ||
> +		((val & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_ACT) ||
> +		((val & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_PRE_DETECT_QUIET) ||
> +		((val & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_WAIT) ||
> +		((val & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_L2_IDLE),
> +		LTSSM_DELAY, LTSSM_TIMEOUT);
> +	if (ret)
> +		dev_err(pcie->dev, "LTSSM state: 0x%x timeout: %d\n", val, ret);
> +
> +	/*
> +	 * Deassert LTSSM state to stop the state toggling between
> +	 * polling and detect.
> +	 */
>   	val = appl_readl(pcie, APPL_CTRL);
>   	val &= ~APPL_CTRL_LTSSM_EN;
>   	appl_writel(pcie, val, APPL_CTRL);
>   
> -	ret = readl_poll_timeout(pcie->appl_base + APPL_DEBUG, val,
> -				 ((val & APPL_DEBUG_LTSSM_STATE_MASK) >>
> -				 APPL_DEBUG_LTSSM_STATE_SHIFT) ==
> -				 LTSSM_STATE_PRE_DETECT,
> -				 1, LTSSM_TIMEOUT);
> -	if (ret)
> -		dev_err(pcie->dev, "Failed to go Detect state: %d\n", ret);
> -
>   	reset_control_assert(pcie->core_rst);
>   
>   	tegra_pcie_disable_phy(pcie);

-- 
nvpublic

[V5,03/13] PCI: tegra194: Don't force the device into the D0 state before L2

[Manikanta Maddireddy]

From: Vidya Sagar <vidyas@nvidia.com>

As per PCIe CEM spec rev 4.0 ver 1.0 sec 2.3, the PCIe endpoint device
should be in D3 state to assert wake# pin. This takes precedence over PCI
Express Base r4.0 v1.0 September 27-2017, 5.2 Link State Power Management
which states that the device can be put into D0 state before taking the
link to L2 state. So, to enable the wake functionality for endpoints, do
not force the devices to D0 state before taking the link to L2 state.
There is no functional issue with the endpoints where the link doesn't go
into L2 state (the reason why the earlier change was made in the first
place) as the root port proceeds with the usual flow post PME timeout.

Fixes: 56e15a238d92 ("PCI: tegra: Add Tegra194 PCIe support")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
---
V5:
* None

V4:
* None

V3:
* None

V2:
* None

 drivers/pci/controller/dwc/pcie-tegra194.c | 41 ----------------------
 1 file changed, 41 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 4ac6b1cea13f..808a1e213b79 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -1261,44 +1261,6 @@ static int tegra_pcie_bpmp_set_pll_state(struct tegra_pcie_dw *pcie,
 	return 0;
 }
 
-static void tegra_pcie_downstream_dev_to_D0(struct tegra_pcie_dw *pcie)
-{
-	struct dw_pcie_rp *pp = &pcie->pci.pp;
-	struct pci_bus *child, *root_port_bus = NULL;
-	struct pci_dev *pdev;
-
-	/*
-	 * link doesn't go into L2 state with some of the endpoints with Tegra
-	 * if they are not in D0 state. So, need to make sure that immediate
-	 * downstream devices are in D0 state before sending PME_TurnOff to put
-	 * link into L2 state.
-	 * This is as per PCI Express Base r4.0 v1.0 September 27-2017,
-	 * 5.2 Link State Power Management (Page #428).
-	 */
-
-	list_for_each_entry(child, &pp->bridge->bus->children, node) {
-		if (child->parent == pp->bridge->bus) {
-			root_port_bus = child;
-			break;
-		}
-	}
-
-	if (!root_port_bus) {
-		dev_err(pcie->dev, "Failed to find downstream bus of Root Port\n");
-		return;
-	}
-
-	/* Bring downstream devices to D0 if they are not already in */
-	list_for_each_entry(pdev, &root_port_bus->devices, bus_list) {
-		if (PCI_SLOT(pdev->devfn) == 0) {
-			if (pci_set_power_state(pdev, PCI_D0))
-				dev_err(pcie->dev,
-					"Failed to transition %s to D0 state\n",
-					dev_name(&pdev->dev));
-		}
-	}
-}
-
 static int tegra_pcie_get_slot_regulators(struct tegra_pcie_dw *pcie)
 {
 	pcie->slot_ctl_3v3 = devm_regulator_get_optional(pcie->dev, "vpcie3v3");
@@ -1627,7 +1589,6 @@ static void tegra_pcie_dw_pme_turnoff(struct tegra_pcie_dw *pcie)
 
 static void tegra_pcie_deinit_controller(struct tegra_pcie_dw *pcie)
 {
-	tegra_pcie_downstream_dev_to_D0(pcie);
 	dw_pcie_host_deinit(&pcie->pci.pp);
 	tegra_pcie_dw_pme_turnoff(pcie);
 	tegra_pcie_unconfig_controller(pcie);
@@ -2337,7 +2298,6 @@ static int tegra_pcie_dw_suspend_noirq(struct device *dev)
 	if (!pcie->link_state)
 		return 0;
 
-	tegra_pcie_downstream_dev_to_D0(pcie);
 	tegra_pcie_dw_pme_turnoff(pcie);
 	tegra_pcie_unconfig_controller(pcie);
 
@@ -2411,7 +2371,6 @@ static void tegra_pcie_dw_shutdown(struct platform_device *pdev)
 			return;
 
 		debugfs_remove_recursive(pcie->debugfs);
-		tegra_pcie_downstream_dev_to_D0(pcie);
 
 		disable_irq(pcie->pci.pp.irq);
 		if (IS_ENABLED(CONFIG_PCI_MSI))
-- 
2.34.1

Re: [V5,03/13] PCI: tegra194: Don't force the device into the D0 state before L2

[Jon Hunter]

On 08/02/2026 18:07, Manikanta Maddireddy wrote:
> From: Vidya Sagar <vidyas@nvidia.com>
> 
> As per PCIe CEM spec rev 4.0 ver 1.0 sec 2.3, the PCIe endpoint device
> should be in D3 state to assert wake# pin. This takes precedence over PCI
> Express Base r4.0 v1.0 September 27-2017, 5.2 Link State Power Management
> which states that the device can be put into D0 state before taking the
> link to L2 state. So, to enable the wake functionality for endpoints, do
> not force the devices to D0 state before taking the link to L2 state.
> There is no functional issue with the endpoints where the link doesn't go
> into L2 state (the reason why the earlier change was made in the first
> place) as the root port proceeds with the usual flow post PME timeout.
> 
> Fixes: 56e15a238d92 ("PCI: tegra: Add Tegra194 PCIe support")
> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
> Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
> ---
> V5:
> * None
> 
> V4:
> * None
> 
> V3:
> * None
> 
> V2:
> * None

For future reference, you can always just say ...

Changes V1 -> V5: None

Jon

[V5,04/13] PCI: tegra194: Free up EP resources during remove()

[Manikanta Maddireddy]

From: Vidya Sagar <vidyas@nvidia.com>

Free up the resources during remove() that were acquired by the DesignWare
driver for the endpoint mode during probe().

Fixes: bb617cbd8151 ("PCI: tegra194: Clean up the exit path for Endpoint mode")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
---
V5:
* None

V4:
* None

V3:
* None

V2:
* None

 drivers/pci/controller/dwc/pcie-tegra194.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 808a1e213b79..1dba3a2d8eae 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -2247,6 +2247,7 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev)
 static void tegra_pcie_dw_remove(struct platform_device *pdev)
 {
 	struct tegra_pcie_dw *pcie = platform_get_drvdata(pdev);
+	struct dw_pcie_ep *ep = &pcie->pci.ep;
 
 	if (pcie->of_data->mode == DW_PCIE_RC_TYPE) {
 		if (!pcie->link_state)
@@ -2258,6 +2259,7 @@ static void tegra_pcie_dw_remove(struct platform_device *pdev)
 	} else {
 		disable_irq(pcie->pex_rst_irq);
 		pex_ep_event_pex_rst_assert(pcie);
+		dw_pcie_ep_deinit(ep);
 	}
 
 	pm_runtime_disable(pcie->dev);
-- 
2.34.1

[V5,05/13] PCI: tegra194: Use HW version number

[Manikanta Maddireddy]

Tegra194 PCIe driver uses custom version number to detect Tegra194 and
Tegra234 IPs. With version detect logic added, version check results
in mismatch warnings.

Use HW version numbers in Tegra194 driver to avoid this kernel warnings.

Fixed version check to enable ecrc for Tegra194.
Existing 490A check is left intact in case any HW relying on existing check.

Fixes: a54e19073718 ("PCI: tegra194: Add Tegra234 PCIe support")
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
---
V5:
* None

V4:
* None

V3:
* None

V2:
* None

 drivers/pci/controller/dwc/pcie-designware.c | 2 +-
 drivers/pci/controller/dwc/pcie-designware.h | 2 ++
 drivers/pci/controller/dwc/pcie-tegra194.c   | 4 ++--
 3 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 345365ea97c7..0dac5d2f5a83 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -559,7 +559,7 @@ int dw_pcie_prog_outbound_atu(struct dw_pcie *pci,
 	if (upper_32_bits(limit_addr) > upper_32_bits(parent_bus_addr) &&
 	    dw_pcie_ver_is_ge(pci, 460A))
 		val |= PCIE_ATU_INCREASE_REGION_SIZE;
-	if (dw_pcie_ver_is(pci, 490A))
+	if (dw_pcie_ver_is(pci, 490A) || dw_pcie_ver_is(pci, 500A))
 		val = dw_pcie_enable_ecrc(val);
 	dw_pcie_writel_atu_ob(pci, atu->index, PCIE_ATU_REGION_CTRL1, val);
 
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index f4cf1602cc99..5bceadbd2c9f 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -34,8 +34,10 @@
 #define DW_PCIE_VER_470A		0x3437302a
 #define DW_PCIE_VER_480A		0x3438302a
 #define DW_PCIE_VER_490A		0x3439302a
+#define DW_PCIE_VER_500A		0x3530302a
 #define DW_PCIE_VER_520A		0x3532302a
 #define DW_PCIE_VER_540A		0x3534302a
+#define DW_PCIE_VER_562A		0x3536322a
 
 #define __dw_pcie_ver_cmp(_pci, _ver, _op) \
 	((_pci)->version _op DW_PCIE_VER_ ## _ver)
diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 1dba3a2d8eae..3924ac123183 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -35,8 +35,8 @@
 #include <soc/tegra/bpmp-abi.h>
 #include "../../pci.h"
 
-#define TEGRA194_DWC_IP_VER			0x490A
-#define TEGRA234_DWC_IP_VER			0x562A
+#define TEGRA194_DWC_IP_VER			DW_PCIE_VER_500A
+#define TEGRA234_DWC_IP_VER			DW_PCIE_VER_562A
 
 #define APPL_PINMUX				0x0
 #define APPL_PINMUX_PEX_RST			BIT(0)
-- 
2.34.1

[V5,06/13] PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on

[Manikanta Maddireddy]

When PERST# is deasserted twice (assert -> deassert -> assert -> deassert),
a CBB (Control Backbone) timeout occurs at DBI register offset 0x8bc
(PCIE_MISC_CONTROL_1_OFF). This happens because pci_epc_deinit_notify()
and dw_pcie_ep_cleanup() are called before reset_control_deassert() powers
on the controller core.

The call chain that causes the timeout:
  pex_ep_event_pex_rst_deassert()
    pci_epc_deinit_notify()
      pci_epf_test_epc_deinit()
        pci_epf_test_clear_bar()
          pci_epc_clear_bar()
            dw_pcie_ep_clear_bar()
              __dw_pcie_ep_reset_bar()
                dw_pcie_dbi_ro_wr_en()  <- Accesses 0x8bc DBI register
    reset_control_deassert(pcie->core_rst)  <- Core powered on HERE

The DBI registers, including PCIE_MISC_CONTROL_1_OFF (0x8bc), are only
accessible after the controller core is powered on via
reset_control_deassert(pcie->core_rst). Accessing them before this point
results in a CBB timeout because the hardware is not yet operational.

Fix this by moving pci_epc_deinit_notify() and dw_pcie_ep_cleanup() to
after reset_control_deassert(pcie->core_rst), ensuring the controller is
fully powered on before any DBI register accesses occur.

Fixes: 40e2125381dc ("PCI: tegra194: Move controller cleanups to pex_ep_event_pex_rst_deassert()")
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
---
V5:
* None

V4:
* None

V3:
* None

V2:
* None

 drivers/pci/controller/dwc/pcie-tegra194.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 3924ac123183..bc9a66ba53e2 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -1742,10 +1742,6 @@ static void pex_ep_event_pex_rst_deassert(struct tegra_pcie_dw *pcie)
 		goto fail_phy;
 	}
 
-	/* Perform cleanup that requires refclk */
-	pci_epc_deinit_notify(pcie->pci.ep.epc);
-	dw_pcie_ep_cleanup(&pcie->pci.ep);
-
 	/* Clear any stale interrupt statuses */
 	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L0);
 	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_0_0);
@@ -1806,6 +1802,10 @@ static void pex_ep_event_pex_rst_deassert(struct tegra_pcie_dw *pcie)
 
 	reset_control_deassert(pcie->core_rst);
 
+	/* Perform cleanup that requires refclk and core reset deasserted */
+	pci_epc_deinit_notify(pcie->pci.ep.epc);
+	dw_pcie_ep_cleanup(&pcie->pci.ep);
+
 	if (pcie->update_fc_fixup) {
 		val = dw_pcie_readl_dbi(pci, CFG_TIMER_CTRL_MAX_FUNC_NUM_OFF);
 		val |= 0x1 << CFG_TIMER_CTRL_ACK_NAK_SHIFT;
-- 
2.34.1

[V5,07/13] PCI: tegra194: Disable PERST IRQ only in Endpoint mode

[Manikanta Maddireddy]

The PERST (PERST#) GPIO interrupt is only registered when the controller
is operating in Endpoint mode. In Root Port mode, the PERST GPIO is
configured as an output to control downstream devices, and no interrupt
is registered for it.

Currently, tegra_pcie_dw_stop_link() unconditionally calls disable_irq()
on pex_rst_irq, which causes issues in Root Port mode where this IRQ is
not registered.

Fix this by only disabling the PERST IRQ when operating in Endpoint mode,
where the interrupt is actually registered and used to detect PERST
assertion/deassertion from the host.

Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
---
V5:
* None

V4:
* None

V3:
* None

V2:
* None

 drivers/pci/controller/dwc/pcie-tegra194.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index bc9a66ba53e2..80da5a032bd4 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -1028,7 +1028,8 @@ static void tegra_pcie_dw_stop_link(struct dw_pcie *pci)
 {
 	struct tegra_pcie_dw *pcie = to_tegra_pcie(pci);
 
-	disable_irq(pcie->pex_rst_irq);
+	if (pcie->of_data->mode == DW_PCIE_EP_TYPE)
+		disable_irq(pcie->pex_rst_irq);
 }
 
 static const struct dw_pcie_ops tegra_dw_pcie_ops = {
-- 
2.34.1

[V5,08/13] PCI: tegra194: Disable direct speed change for EP

[Manikanta Maddireddy]

From: Vidya Sagar <vidyas@nvidia.com>

Disable direct speed change for the endpoint to prevent it from initiating
the speed change post physical layer link up at gen1. This leaves the speed
change ownership with the host.

Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
---
V5:
* None

V4:
* None

V3:
* None

V2:
* None

 drivers/pci/controller/dwc/pcie-tegra194.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 80da5a032bd4..7463cb1d9606 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -1807,6 +1807,10 @@ static void pex_ep_event_pex_rst_deassert(struct tegra_pcie_dw *pcie)
 	pci_epc_deinit_notify(pcie->pci.ep.epc);
 	dw_pcie_ep_cleanup(&pcie->pci.ep);
 
+	val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
+	val &= ~PORT_LOGIC_SPEED_CHANGE;
+	dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
+
 	if (pcie->update_fc_fixup) {
 		val = dw_pcie_readl_dbi(pci, CFG_TIMER_CTRL_MAX_FUNC_NUM_OFF);
 		val |= 0x1 << CFG_TIMER_CTRL_ACK_NAK_SHIFT;
-- 
2.34.1

[V5,09/13] PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"

[Manikanta Maddireddy]

From: Vidya Sagar <vidyas@nvidia.com>

The GPIO DT property "nvidia,refclk-select" to select the PCIe reference
clock is optional. Use devm_gpiod_get_optional() to get it.

Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
---
V5:
* Added Fixes tag

V4:
* None

V3:
* None

V2:
* None

 drivers/pci/controller/dwc/pcie-tegra194.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 7463cb1d9606..bed6edb3d795 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -1170,9 +1170,9 @@ static int tegra_pcie_dw_parse_dt(struct tegra_pcie_dw *pcie)
 		return err;
 	}
 
-	pcie->pex_refclk_sel_gpiod = devm_gpiod_get(pcie->dev,
-						    "nvidia,refclk-select",
-						    GPIOD_OUT_HIGH);
+	pcie->pex_refclk_sel_gpiod = devm_gpiod_get_optional(pcie->dev,
+							     "nvidia,refclk-select",
+							     GPIOD_OUT_HIGH);
 	if (IS_ERR(pcie->pex_refclk_sel_gpiod)) {
 		int err = PTR_ERR(pcie->pex_refclk_sel_gpiod);
 		const char *level = KERN_ERR;
-- 
2.34.1

[V5,10/13] PCI: tegra194: Apply pinctrl settings for both PCIe RP and EP

[Manikanta Maddireddy]

From: Vidya Sagar <vidyas@nvidia.com>

PERST# and CLKREQ# pinctrl settings should be applied for both root port
and endpoint mode. Move pinctrl_pm_select_default_state() function call
from root port specific configuration function to probe().

Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
---
V5:
* Use dev_err_probe() function

V4:
* None

V3:
* None

V2:
* None

 drivers/pci/controller/dwc/pcie-tegra194.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index bed6edb3d795..ea1f6b26f8ec 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -1609,12 +1609,6 @@ static int tegra_pcie_config_rp(struct tegra_pcie_dw *pcie)
 		goto fail_pm_get_sync;
 	}
 
-	ret = pinctrl_pm_select_default_state(dev);
-	if (ret < 0) {
-		dev_err(dev, "Failed to configure sideband pins: %d\n", ret);
-		goto fail_pm_get_sync;
-	}
-
 	ret = tegra_pcie_init_controller(pcie);
 	if (ret < 0) {
 		dev_err(dev, "Failed to initialize controller: %d\n", ret);
@@ -2079,6 +2073,10 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev)
 	pp = &pci->pp;
 	pp->num_vectors = MAX_MSI_IRQS;
 
+	ret = pinctrl_pm_select_default_state(dev);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Failed to configure sideband pins: %d\n", ret);
+
 	ret = tegra_pcie_dw_parse_dt(pcie);
 	if (ret < 0) {
 		const char *level = KERN_ERR;
-- 
2.34.1

[V5,11/13] PCI: tegra194: Free resources during controller deinitialization

[Manikanta Maddireddy]

From: Vidya Sagar <vidyas@nvidia.com>

Call pci_epc_deinit_notify() during controller deinitialization to free the
resources allocated by Endpoint function driver. This is safe to call
during PCIe assert sequence because we don't expect Endpoint function
driver to touch hardware in deinit function.

Fixes: 40e2125381dc ("PCI: tegra194: Move controller cleanups to pex_ep_event_pex_rst_deassert()")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
---
V5:
* Remove pci_epc_deinit_notify() call from pex_ep_event_pex_rst_deassert()

V4:
* None

V3:
* None

V2:
* None

 drivers/pci/controller/dwc/pcie-tegra194.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index ea1f6b26f8ec..ea39e263f4b3 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -1635,12 +1635,16 @@ static int tegra_pcie_config_rp(struct tegra_pcie_dw *pcie)
 
 static void pex_ep_event_pex_rst_assert(struct tegra_pcie_dw *pcie)
 {
+	struct dw_pcie *pci = &pcie->pci;
+	struct dw_pcie_ep *ep = &pci->ep;
 	u32 val;
 	int ret;
 
 	if (pcie->ep_state == EP_STATE_DISABLED)
 		return;
 
+	pci_epc_deinit_notify(ep->epc);
+
 	ret = readl_poll_timeout(pcie->appl_base + APPL_DEBUG, val,
 		((val & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_QUIET) ||
 		((val & APPL_DEBUG_LTSSM_STATE_MASK) == LTSSM_STATE_DETECT_ACT) ||
@@ -1798,7 +1802,6 @@ static void pex_ep_event_pex_rst_deassert(struct tegra_pcie_dw *pcie)
 	reset_control_deassert(pcie->core_rst);
 
 	/* Perform cleanup that requires refclk and core reset deasserted */
-	pci_epc_deinit_notify(pcie->pci.ep.epc);
 	dw_pcie_ep_cleanup(&pcie->pci.ep);
 
 	val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
-- 
2.34.1

[V5,12/13] PCI: tegra194: Allow system suspend when the Endpoint link is not up

[Manikanta Maddireddy]

From: Vidya Sagar <vidyas@nvidia.com>

Only a Root port initiates the L2 sequence. PCIe link is kept in L2 state
during suspend. If Endpoint mode is enabled and the link is up, the
software cannot proceed with suspend. However, when the PCIe Endpoint
driver is probed, but the PCIe link is not up, Tegra can go into suspend
state. So, allow system to suspend in this case.

Fixes: de2bbf2b71bb ("PCI: tegra194: Don't allow suspend when Tegra PCIe is in EP mode")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
---
V5:
* None

V4:
* None

V3:
* None

V2:
* None

 drivers/pci/controller/dwc/pcie-tegra194.c | 31 +++++++++++++++++-----
 1 file changed, 25 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index ea39e263f4b3..0f669933b108 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -2274,16 +2274,28 @@ static void tegra_pcie_dw_remove(struct platform_device *pdev)
 		gpiod_set_value(pcie->pex_refclk_sel_gpiod, 0);
 }
 
-static int tegra_pcie_dw_suspend_late(struct device *dev)
+static int tegra_pcie_dw_suspend(struct device *dev)
 {
 	struct tegra_pcie_dw *pcie = dev_get_drvdata(dev);
-	u32 val;
 
 	if (pcie->of_data->mode == DW_PCIE_EP_TYPE) {
-		dev_err(dev, "Failed to Suspend as Tegra PCIe is in EP mode\n");
-		return -EPERM;
+		if (pcie->ep_state == EP_STATE_ENABLED) {
+			dev_err(dev, "Tegra PCIe is in EP mode, suspend not allowed\n");
+			return -EPERM;
+		}
+
+		disable_irq(pcie->pex_rst_irq);
+		return 0;
 	}
 
+	return 0;
+}
+
+static int tegra_pcie_dw_suspend_late(struct device *dev)
+{
+	struct tegra_pcie_dw *pcie = dev_get_drvdata(dev);
+	u32 val;
+
 	if (!pcie->link_state)
 		return 0;
 
@@ -2303,6 +2315,9 @@ static int tegra_pcie_dw_suspend_noirq(struct device *dev)
 {
 	struct tegra_pcie_dw *pcie = dev_get_drvdata(dev);
 
+	if (pcie->of_data->mode == DW_PCIE_EP_TYPE)
+		return 0;
+
 	if (!pcie->link_state)
 		return 0;
 
@@ -2317,6 +2332,9 @@ static int tegra_pcie_dw_resume_noirq(struct device *dev)
 	struct tegra_pcie_dw *pcie = dev_get_drvdata(dev);
 	int ret;
 
+	if (pcie->of_data->mode == DW_PCIE_EP_TYPE)
+		return 0;
+
 	if (!pcie->link_state)
 		return 0;
 
@@ -2349,8 +2367,8 @@ static int tegra_pcie_dw_resume_early(struct device *dev)
 	u32 val;
 
 	if (pcie->of_data->mode == DW_PCIE_EP_TYPE) {
-		dev_err(dev, "Suspend is not supported in EP mode");
-		return -ENOTSUPP;
+		enable_irq(pcie->pex_rst_irq);
+		return 0;
 	}
 
 	if (!pcie->link_state)
@@ -2455,6 +2473,7 @@ static const struct of_device_id tegra_pcie_dw_of_match[] = {
 };
 
 static const struct dev_pm_ops tegra_pcie_dw_pm_ops = {
+	.suspend = tegra_pcie_dw_suspend,
 	.suspend_late = tegra_pcie_dw_suspend_late,
 	.suspend_noirq = tegra_pcie_dw_suspend_noirq,
 	.resume_noirq = tegra_pcie_dw_resume_noirq,
-- 
2.34.1

[V5,13/13] PCI: tegra194: Set LTR message request before PCIe link up

[Manikanta Maddireddy]

From: Vidya Sagar <vidyas@nvidia.com>

LTR message should be sent as soon as the root port enables LTR in the
endpoint. Set snoop & no snoop LTR timing and LTR message request before
PCIe links up. This ensures that LTR message is sent upstream as soon as
LTR is enabled.

Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
---
V5:
* None

V4:
* None

V3:
* None

V2:
* None

 drivers/pci/controller/dwc/pcie-tegra194.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 0f669933b108..9883d14f7f97 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -124,6 +124,7 @@
 
 #define APPL_LTR_MSG_1				0xC4
 #define LTR_MSG_REQ				BIT(15)
+#define LTR_MST_NO_SNOOP_SHIFT			16
 #define LTR_NOSNOOP_MSG_REQ			BIT(31)
 
 #define APPL_LTR_MSG_2				0xC8
@@ -488,15 +489,6 @@ static irqreturn_t tegra_pcie_ep_irq_thread(int irq, void *arg)
 	if (val & PCI_COMMAND_MASTER) {
 		ktime_t timeout;
 
-		/* 110us for both snoop and no-snoop */
-		val = FIELD_PREP(PCI_LTR_VALUE_MASK, 110) |
-		      FIELD_PREP(PCI_LTR_SCALE_MASK, 2) |
-		      LTR_MSG_REQ |
-		      FIELD_PREP(PCI_LTR_NOSNOOP_VALUE, 110) |
-		      FIELD_PREP(PCI_LTR_NOSNOOP_SCALE, 2) |
-		      LTR_NOSNOOP_MSG_REQ;
-		appl_writel(pcie, val, APPL_LTR_MSG_1);
-
 		/* Send LTR upstream */
 		val = appl_readl(pcie, APPL_LTR_MSG_2);
 		val |= APPL_LTR_MSG_2_LTR_MSG_REQ_STATE;
@@ -1799,6 +1791,11 @@ static void pex_ep_event_pex_rst_deassert(struct tegra_pcie_dw *pcie)
 	val |= APPL_INTR_EN_L1_0_0_RDLH_LINK_UP_INT_EN;
 	appl_writel(pcie, val, APPL_INTR_EN_L1_0_0);
 
+	/* 110us for both snoop and no-snoop */
+	val = 110 | (2 << PCI_LTR_SCALE_SHIFT) | LTR_MSG_REQ;
+	val |= (val << LTR_MST_NO_SNOOP_SHIFT);
+	appl_writel(pcie, val, APPL_LTR_MSG_1);
+
 	reset_control_deassert(pcie->core_rst);
 
 	/* Perform cleanup that requires refclk and core reset deasserted */
-- 
2.34.1

Re: [V5,00/13] Fixes to pcie-tegra194 driver

[Krzysztof Kozlowski]

On 08/02/2026 19:07, Manikanta Maddireddy wrote:
> This series[1] was originally posted by Vidya Sagar, and I have rebased
> it onto 6.19.0-rc6-next. I addressed review comments and split this into
> two series, one for fixes(current) and the other is for enhancements.
> I verified these patches on Jetson AGX Orin(Tegra234 SoC).
> 
> I added below four new patches to fix bugs, commit message of each
> patch has the details on the bug and fix.
>  - PCI: tegra194: Use HW version number
>  - PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
>  - PCI: tegra194: Disable PERST IRQ only in Endpoint mode 
> 


Please use standard email subjects, so with the PATCH keyword in the
title. `git format-patch -vX` helps here to create proper versioned
patches. Another useful tool is b4. Skipping the PATCH keyword makes
filtering of emails more difficult thus making the review process less
convenient.

I really do not get why such big patchset is still not with b4, but if
you insist, then at least do it correct.

Best regards,
Krzysztof

Re: [V5,00/13] Fixes to pcie-tegra194 driver

[Manikanta Maddireddy]

On 09/02/26 1:16 pm, Krzysztof Kozlowski wrote:
> On 08/02/2026 19:07, Manikanta Maddireddy wrote:
>> This series[1] was originally posted by Vidya Sagar, and I have rebased
>> it onto 6.19.0-rc6-next. I addressed review comments and split this into
>> two series, one for fixes(current) and the other is for enhancements.
>> I verified these patches on Jetson AGX Orin(Tegra234 SoC).
>>
>> I added below four new patches to fix bugs, commit message of each
>> patch has the details on the bug and fix.
>>   - PCI: tegra194: Use HW version number
>>   - PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
>>   - PCI: tegra194: Disable PERST IRQ only in Endpoint mode
>>
>
> Please use standard email subjects, so with the PATCH keyword in the
> title. `git format-patch -vX` helps here to create proper versioned
> patches. Another useful tool is b4. Skipping the PATCH keyword makes
> filtering of emails more difficult thus making the review process less
> convenient.
>
> I really do not get why such big patchset is still not with b4, but if
> you insist, then at least do it correct.
>
> Best regards,
> Krzysztof
Apologies, I was using 'git format-patch -vX', but I got confused by how
the subject appears on the 
https://patchwork.kernel.org/project/linux-pci/list/
and mistakenly removed the “PATCH” prefix from the subject line.

I’ll make sure not to repeat this mistake.


Thanks,
Manikanta

Re: [V5,00/13] Fixes to pcie-tegra194 driver

[Jon Hunter]

On 08/02/2026 18:07, Manikanta Maddireddy wrote:
> This series[1] was originally posted by Vidya Sagar, and I have rebased
> it onto 6.19.0-rc6-next. I addressed review comments and split this into
> two series, one for fixes(current) and the other is for enhancements.
> I verified these patches on Jetson AGX Orin(Tegra234 SoC).
> 
> I added below four new patches to fix bugs, commit message of each
> patch has the details on the bug and fix.
>   - PCI: tegra194: Use HW version number
>   - PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
>   - PCI: tegra194: Disable PERST IRQ only in Endpoint mode
> 
> Rest of the patches are same as the original V3 series, just rebased them on
> 6.19.0-rc6-next.

Thanks for splitting this. As Krzysztof mentioned we need to fix the 
subject prefix.

Otherwise, I would just make sure the fixes are ordered with regard to 
the fixes tag. In other words, fixes related 56e15a238d92 ("PCI: tegra: 
Add Tegra194 PCIe support") first, then fixes related to c57247f940e8 
("PCI: tegra: Add support for PCIe endpoint mode in Tegra194") next, 
etc. Given that this was the order the changes were originally merged.

Thanks
Jon

-- 
nvpublic