* [PATCH 02/38] arm: dts: qcom: pm8841: Remove superfluous empty lines
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 01/38] arm: dts: qcom: pm8226: Add newline between subnodes Waqar Hameed
` (36 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There shouldn't be a newline at the start of node definition or multiple
empty lines. Found/fixed with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/pm8841.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/pm8841.dtsi b/arch/arm/boot/dts/qcom/pm8841.dtsi
index 3bf2ce5c86a64..49316e971fd3a 100644
--- a/arch/arm/boot/dts/qcom/pm8841.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8841.dtsi
@@ -2,7 +2,6 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
-
/ {
thermal-zones {
pm8841-thermal {
@@ -34,7 +33,6 @@ crit {
};
&spmi_bus {
-
pm8841_0: pm8841@4 {
compatible = "qcom,pm8841", "qcom,spmi-pmic";
reg = <0x4 SPMI_USID>;
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 01/38] arm: dts: qcom: pm8226: Add newline between subnodes
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
2026-10-01 22:36 ` [PATCH 02/38] arm: dts: qcom: pm8841: Remove superfluous empty lines Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 04/38] arm: dts: qcom: pm8941: Remove superfluous empty lines Waqar Hameed
` (35 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There should be a newline between subnodes. Found/fixed with
dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/pm8226.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/qcom/pm8226.dtsi b/arch/arm/boot/dts/qcom/pm8226.dtsi
index 2fd4f135ed84c..abab3c6e253c2 100644
--- a/arch/arm/boot/dts/qcom/pm8226.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8226.dtsi
@@ -109,21 +109,26 @@ channel@7 {
qcom,pre-scaling = <1 3>;
label = "vph_pwr";
};
+
channel@8 {
reg = <VADC_DIE_TEMP>;
label = "die_temp";
};
+
channel@9 {
reg = <VADC_REF_625MV>;
label = "ref_625mv";
};
+
channel@a {
reg = <VADC_REF_1250MV>;
label = "ref_1250mv";
};
+
channel@e {
reg = <VADC_GND_REF>;
};
+
channel@f {
reg = <VADC_VDD_VADC>;
};
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 04/38] arm: dts: qcom: pm8941: Remove superfluous empty lines
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
2026-10-01 22:36 ` [PATCH 02/38] arm: dts: qcom: pm8841: Remove superfluous empty lines Waqar Hameed
2026-10-01 22:36 ` [PATCH 01/38] arm: dts: qcom: pm8226: Add newline between subnodes Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 03/38] arm: dts: qcom: pm8921: " Waqar Hameed
` (34 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There shouldn't be a newline at the start of node definition or multiple
empty lines. Found/fixed with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/pm8941.dtsi | 3 ---
1 file changed, 3 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/pm8941.dtsi b/arch/arm/boot/dts/qcom/pm8941.dtsi
index aca0052a02b75..e48803fa74333 100644
--- a/arch/arm/boot/dts/qcom/pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8941.dtsi
@@ -3,7 +3,6 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
-
/ {
thermal-zones {
pm8941-thermal {
@@ -35,7 +34,6 @@ crit {
};
&spmi_bus {
-
pm8941_0: pm8941@0 {
compatible = "qcom,pm8941", "qcom,spmi-pmic";
reg = <0x0 SPMI_USID>;
@@ -146,7 +144,6 @@ pm8941_vadc: adc@3100 {
#size-cells = <0>;
#io-channel-cells = <1>;
-
channel@6 {
reg = <VADC_VBAT_SNS>;
};
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 03/38] arm: dts: qcom: pm8921: Remove superfluous empty lines
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (2 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 04/38] arm: dts: qcom: pm8941: Remove superfluous empty lines Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 06/38] arm: dts: qcom: apq8026: Add newline between subnodes Waqar Hameed
` (33 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There shouldn't be a newline at the start or end of node definition.
Found/fixed with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/pm8921.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi
index 15246f4bd2672..7b177b65c6b61 100644
--- a/arch/arm/boot/dts/qcom/pm8921.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8921.dtsi
@@ -53,7 +53,6 @@ pm8921_keypad: keypad@148 {
};
pm8921_gpio: gpio@150 {
-
compatible = "qcom,pm8921-gpio",
"qcom,ssbi-gpio";
reg = <0x150>;
@@ -62,7 +61,6 @@ pm8921_gpio: gpio@150 {
gpio-controller;
gpio-ranges = <&pm8921_gpio 0 0 44>;
#gpio-cells = <2>;
-
};
pm8921_xoadc: xoadc@197 {
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 06/38] arm: dts: qcom: apq8026: Add newline between subnodes
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (3 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 03/38] arm: dts: qcom: pm8921: " Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 05/38] arm: dts: qcom: pm8084: Remove superfluous empty line Waqar Hameed
` (32 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There should be a newline between subnodes. Found/fixed with
dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
.../dts/qcom/qcom-apq8026-asus-sparrow.dts | 32 +++++++++++++++++++
.../boot/dts/qcom/qcom-apq8026-lg-lenok.dts | 27 ++++++++++++++++
2 files changed, 59 insertions(+)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
index a2ca456012f1a..4340b4581e011 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
@@ -22,22 +22,27 @@ sbl_region: sbl@2f00000 {
reg = <0x02f00000 0x100000>;
no-map;
};
+
external_image_region: external-image@3100000 {
reg = <0x3100000 0x200000>;
no-map;
};
+
peripheral_region: peripheral@3300000 {
reg = <0x3300000 0x600000>;
no-map;
};
+
adsp_region: adsp@3900000 {
reg = <0x3900000 0x1400000>;
no-map;
};
+
modem_region: modem@4d00000 {
reg = <0x4d00000 0x1b00000>;
no-map;
};
+
modem_efs_region: modem-efs@7f00000 {
reg = <0x7f00000 0x100000>;
no-map;
@@ -94,10 +99,12 @@ pm8226_s3: s3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1300000>;
};
+
pm8226_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2200000>;
};
+
pm8226_s5: s5 {
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
@@ -107,102 +114,127 @@ pm8226_l1: l1 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
+
pm8226_l2: l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
+
pm8226_l3: l3 {
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1337500>;
};
+
pm8226_l4: l4 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
+
pm8226_l5: l5 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
+
pm8226_l6: l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
pm8226_l7: l7 {
regulator-min-microvolt = <1900000>;
regulator-max-microvolt = <1900000>;
};
+
pm8226_l8: l8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
pm8226_l9: l9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
pm8226_l10: l10 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
pm8226_l12: l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
pm8226_l14: l14 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <2750000>;
};
+
pm8226_l15: l15 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
+
pm8226_l16: l16 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
+
pm8226_l17: l17 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
};
+
pm8226_l18: l18 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
};
+
pm8226_l19: l19 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
+
pm8226_l20: l20 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};
+
pm8226_l21: l21 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
+
pm8226_l22: l22 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
+
pm8226_l23: l23 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
pm8226_l24: l24 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1350000>;
};
+
pm8226_l25: l25 {
regulator-min-microvolt = <1775000>;
regulator-max-microvolt = <2125000>;
};
+
pm8226_l26: l26 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
+
pm8226_l27: l27 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
+
pm8226_l28: l28 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
index a70de21bf139b..6184bb47a5731 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
@@ -157,10 +157,12 @@ pm8226_s3: s3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1350000>;
};
+
pm8226_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2200000>;
};
+
pm8226_s5: s5 {
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
@@ -170,102 +172,127 @@ pm8226_l1: l1 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
+
pm8226_l2: l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
+
pm8226_l3: l3 {
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1337500>;
};
+
pm8226_l4: l4 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
+
pm8226_l5: l5 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
+
pm8226_l6: l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
pm8226_l7: l7 {
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <1850000>;
};
+
pm8226_l8: l8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
pm8226_l9: l9 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
+
pm8226_l10: l10 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
pm8226_l12: l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
pm8226_l14: l14 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <2750000>;
};
+
pm8226_l15: l15 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
+
pm8226_l16: l16 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3350000>;
};
+
pm8226_l17: l17 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
};
+
pm8226_l18: l18 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
};
+
pm8226_l19: l19 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
+
pm8226_l20: l20 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};
+
pm8226_l21: l21 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
+
pm8226_l22: l22 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
pm8226_l23: l23 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
+
pm8226_l24: l24 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1350000>;
};
+
pm8226_l25: l25 {
regulator-min-microvolt = <1775000>;
regulator-max-microvolt = <2125000>;
};
+
pm8226_l26: l26 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
+
pm8226_l27: l27 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
+
pm8226_l28: l28 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3000000>;
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 05/38] arm: dts: qcom: pm8084: Remove superfluous empty line
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (4 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 06/38] arm: dts: qcom: apq8026: Add newline between subnodes Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 07/38] arm: dts: qcom: apq8026: Add space between OR-operator Waqar Hameed
` (31 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There shouldn't be a newline at the start of node definition.
Found/fixed with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/pma8084.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom/pma8084.dtsi b/arch/arm/boot/dts/qcom/pma8084.dtsi
index 309f5256754bb..f0a0bc65653fe 100644
--- a/arch/arm/boot/dts/qcom/pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom/pma8084.dtsi
@@ -5,7 +5,6 @@
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
-
pma8084_0: pma8084@0 {
compatible = "qcom,pma8084", "qcom,spmi-pmic";
reg = <0x0 SPMI_USID>;
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 07/38] arm: dts: qcom: apq8026: Add space between OR-operator
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (5 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 05/38] arm: dts: qcom: pm8084: Remove superfluous empty line Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 08/38] arm: dts: qcom: apq8060: Add newline between subnodes Waqar Hameed
` (30 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There should be a space between binary operators. Found/fixed with
dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts
index a8543ca7b5569..da0b5969c8320 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts
@@ -86,8 +86,8 @@ key-volume-up {
i2c-backlight {
compatible = "i2c-gpio";
- sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
pinctrl-0 = <&backlight_i2c_default_state>;
pinctrl-names = "default";
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 08/38] arm: dts: qcom: apq8060: Add newline between subnodes
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (6 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 07/38] arm: dts: qcom: apq8026: Add space between OR-operator Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 09/38] arm: dts: qcom: apq8060: Align multiple property data Waqar Hameed
` (29 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There should be a newline between subnodes. Found/fixed with
dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
.../dts/qcom/qcom-apq8060-dragonboard.dts | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index 009afd8212c22..fa2b372e51bf3 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -181,6 +181,7 @@ eeprom@52 {
vcc-supply = <&pm8058_s3>;
pagesize = <64>;
};
+
wm8903: wm8903@1a {
/* This Woolfson Micro device has an unrouted interrupt line */
compatible = "wlf,wm8903";
@@ -226,6 +227,7 @@ ak8975@c {
vid-supply = <&pm8058_lvs0>; // 1.8V
vdd-supply = <&pm8058_l14>; // 2.85V
};
+
bmp085@77 {
compatible = "bosch,bmp085";
reg = <0x77>;
@@ -237,6 +239,7 @@ bmp085@77 {
vddd-supply = <&pm8058_lvs0>; // 1.8V
vdda-supply = <&pm8058_l14>; // 2.85V
};
+
mpu3050@68 {
compatible = "invensense,mpu3050";
reg = <0x68>;
@@ -287,6 +290,7 @@ pinconf {
power-source = <PM8058_GPIO_S3>;
};
};
+
dragon_bmp085_gpios: bmp085-state {
pinconf {
pins = "gpio16";
@@ -296,6 +300,7 @@ pinconf {
power-source = <PM8058_GPIO_S3>;
};
};
+
dragon_mpu3050_gpios: mpu3050-state {
pinconf {
pins = "gpio17";
@@ -305,6 +310,7 @@ pinconf {
power-source = <PM8058_GPIO_S3>;
};
};
+
dragon_sdcc3_gpios: sdcc3-state {
pinconf {
pins = "gpio22";
@@ -314,6 +320,7 @@ pinconf {
power-source = <PM8058_GPIO_S3>;
};
};
+
dragon_sdcc5_gpios: sdcc5-state {
pinconf {
pins = "gpio26";
@@ -324,6 +331,7 @@ pinconf {
power-source = <PM8058_GPIO_S3>;
};
};
+
dragon_ak8975_gpios: ak8975-state {
pinconf {
pins = "gpio33";
@@ -333,6 +341,7 @@ pinconf {
power-source = <PM8058_GPIO_S3>;
};
};
+
dragon_cm3605_gpios: cm3605-state {
/* Pin 34 connected to the proxy IRQ */
gpio34-pins {
@@ -342,6 +351,7 @@ gpio34-pins {
bias-disable;
power-source = <PM8058_GPIO_S3>;
};
+
/* Pin 35 connected to ASET */
gpio35-pins {
pins = "gpio35";
@@ -351,6 +361,7 @@ gpio35-pins {
power-source = <PM8058_GPIO_S3>;
};
};
+
dragon_veth_gpios: veth-state {
pinconf {
pins = "gpio40";
@@ -521,12 +532,14 @@ pm8901_s2: s2 {
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
+
pm8901_s3: s3 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
+
pm8901_s4: s4 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
@@ -837,12 +850,14 @@ clk-pins {
drive-strength = <16>;
bias-disable;
};
+
cmd-pins {
pins = "gpio168"; /* SDC1 CMD */
function = "sdc1";
drive-strength = <10>;
bias-pull-up;
};
+
data-pins {
/* SDC1 D0 to D7 */
pins = "gpio159", "gpio160", "gpio161", "gpio162",
@@ -863,11 +878,13 @@ clk-pins {
drive-strength = <8>;
bias-disable;
};
+
cmd-pins {
pins = "sdc3_cmd";
drive-strength = <8>;
bias-pull-up;
};
+
data-pins {
pins = "sdc3_data";
drive-strength = <8>;
@@ -883,12 +900,14 @@ clk-pins {
drive-strength = <16>;
bias-disable;
};
+
cmd-pins {
pins = "gpio95"; /* SDC5 CMD */
function = "sdc5";
drive-strength = <10>;
bias-pull-up;
};
+
data-pins {
/* SDC5 D0 to D3 */
pins = "gpio96", "gpio98", "gpio99", "gpio100";
@@ -930,6 +949,7 @@ tx-pins {
drive-strength = <8>;
bias-disable;
};
+
rx-pins {
pins = "gpio118";
function = "gsbi12";
@@ -951,6 +971,7 @@ mux0-pins {
"gpio134"; /* CS0_N testpoint TP29 */
function = "ebi2cs";
};
+
mux1-pins {
pins =
/* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */
@@ -983,6 +1004,7 @@ reset-pins {
drive-strength = <6>;
bias-disable;
};
+
irq-pins {
pins = "gpio61"; /* IRQ line */
function = "gpio";
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 09/38] arm: dts: qcom: apq8060: Align multiple property data
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (7 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 08/38] arm: dts: qcom: apq8060: Add newline between subnodes Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 10/38] arm: dts: qcom: apq8060: Indent property data with tab Waqar Hameed
` (28 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
Multiple property data on a newline should be aligned with the first
one. Found/fixed with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index fa2b372e51bf3..4dc63032cccb6 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -99,7 +99,7 @@ ethernet@2,0 {
* for network wakeup, connected to the TLMM.
*/
interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>,
- <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
+ <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
vdd33a-supply = <&dragon_veth>;
vddvario-supply = <&dragon_vario>;
@@ -861,7 +861,7 @@ cmd-pins {
data-pins {
/* SDC1 D0 to D7 */
pins = "gpio159", "gpio160", "gpio161", "gpio162",
- "gpio163", "gpio164", "gpio165", "gpio166";
+ "gpio163", "gpio164", "gpio165", "gpio166";
function = "sdc1";
drive-strength = <10>;
bias-pull-up;
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 10/38] arm: dts: qcom: apq8060: Indent property data with tab
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (8 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 09/38] arm: dts: qcom: apq8060: Align multiple property data Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 11/38] arm: dts: qcom: apq8064: Add newline between subnodes Waqar Hameed
` (27 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
Multiple property data on a newline should be indented with tabs.
Found/fixed with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
.../dts/qcom/qcom-apq8060-dragonboard.dts | 28 +++++++++----------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index 4dc63032cccb6..6ede4e5af4494 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -966,25 +966,25 @@ dragon_ebi2_pins: ebi2-state {
*/
mux0-pins {
pins =
- /* "gpio39", CS1A_N this is not good to mux */
- "gpio40", /* CS2A_N */
- "gpio134"; /* CS0_N testpoint TP29 */
+ /* "gpio39", CS1A_N this is not good to mux */
+ "gpio40", /* CS2A_N */
+ "gpio134"; /* CS0_N testpoint TP29 */
function = "ebi2cs";
};
mux1-pins {
pins =
- /* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */
- "gpio123", "gpio124", "gpio125", "gpio126",
- "gpio127", "gpio128", "gpio129", "gpio130",
- /* EBI2_DATA_15 downto EBI2_DATA_0 data bus */
- "gpio135", "gpio136", "gpio137", "gpio138",
- "gpio139", "gpio140", "gpio141", "gpio142",
- "gpio143", "gpio144", "gpio145", "gpio146",
- "gpio147", "gpio148", "gpio149", "gpio150",
- "gpio151", /* EBI2_OE_N */
- "gpio153", /* EBI2_ADV */
- "gpio157"; /* EBI2_WE_N */
+ /* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */
+ "gpio123", "gpio124", "gpio125", "gpio126",
+ "gpio127", "gpio128", "gpio129", "gpio130",
+ /* EBI2_DATA_15 downto EBI2_DATA_0 data bus */
+ "gpio135", "gpio136", "gpio137", "gpio138",
+ "gpio139", "gpio140", "gpio141", "gpio142",
+ "gpio143", "gpio144", "gpio145", "gpio146",
+ "gpio147", "gpio148", "gpio149", "gpio150",
+ "gpio151", /* EBI2_OE_N */
+ "gpio153", /* EBI2_ADV */
+ "gpio157"; /* EBI2_WE_N */
function = "ebi2";
};
};
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 11/38] arm: dts: qcom: apq8064: Add newline between subnodes
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (9 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 10/38] arm: dts: qcom: apq8060: Indent property data with tab Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 12/38] arm: dts: qcom: apq8064: Remove empty line at end of node Waqar Hameed
` (26 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There should be a newline (and only one) between subnodes. Found/fixed
with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
.../boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts | 2 ++
arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 11 +++++++++--
2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
index 9471839928505..bdd3dab530ece 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
@@ -53,6 +53,7 @@ key-volume-up {
gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_VOLUMEUP>;
};
+
key-volume-down {
label = "Volume Down";
gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>;
@@ -330,6 +331,7 @@ pm8921_lvs5: lvs5 {
pm8921_lvs6: lvs6 {
bias-pull-down;
};
+
/*
* mipi_dsi.1-dsi1_vddio
* pil_riva-pll_vdd
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 09062b2ad8ba5..0423b9380c812 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -116,6 +116,7 @@ cpu_alert0: trip0 {
hysteresis = <2000>;
type = "passive";
};
+
cpu_crit0: trip1 {
temperature = <110000>;
hysteresis = <2000>;
@@ -137,6 +138,7 @@ cpu_alert1: trip0 {
hysteresis = <2000>;
type = "passive";
};
+
cpu_crit1: trip1 {
temperature = <110000>;
hysteresis = <2000>;
@@ -158,6 +160,7 @@ cpu_alert2: trip0 {
hysteresis = <2000>;
type = "passive";
};
+
cpu_crit2: trip1 {
temperature = <110000>;
hysteresis = <2000>;
@@ -179,6 +182,7 @@ cpu_alert3: trip0 {
hysteresis = <2000>;
type = "passive";
};
+
cpu_crit3: trip1 {
temperature = <110000>;
hysteresis = <2000>;
@@ -707,6 +711,7 @@ qfprom: efuse@700000 {
tsens_calib: calib@404 {
reg = <0x404 0x10>;
};
+
tsens_backup: backup-calib@414 {
reg = <0x414 0x10>;
};
@@ -1177,7 +1182,6 @@ dsi0_out: endpoint {
};
};
-
dsi0_phy: phy@4700200 {
compatible = "qcom,dsi-phy-28nm-8960";
#clock-cells = <1>;
@@ -1249,7 +1253,6 @@ dsi1_out: endpoint {
};
};
-
dsi1_phy: dsi-phy@5800200 {
compatible = "qcom,dsi-phy-28nm-8960";
reg = <0x05800200 0x100>,
@@ -1596,18 +1599,21 @@ funnel_in0: endpoint {
remote-endpoint = <&etm0_out>;
};
};
+
port@1 {
reg = <1>;
funnel_in1: endpoint {
remote-endpoint = <&etm1_out>;
};
};
+
port@4 {
reg = <4>;
funnel_in4: endpoint {
remote-endpoint = <&etm2_out>;
};
};
+
port@5 {
reg = <5>;
funnel_in5: endpoint {
@@ -1698,4 +1704,5 @@ etm3_out: endpoint {
};
};
};
+
#include "qcom-apq8064-pins.dtsi"
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 12/38] arm: dts: qcom: apq8064: Remove empty line at end of node
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (10 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 11/38] arm: dts: qcom: apq8064: Add newline between subnodes Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 13/38] arm: dts: qcom: apq8064: Add space before line comments Waqar Hameed
` (25 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There shouldn't be an empty line at end of node definition. Found/fixed
with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts | 1 -
arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts | 1 -
arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 1 -
3 files changed, 3 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
index bdd3dab530ece..4111834b12012 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
@@ -137,7 +137,6 @@ bq27541@55 {
compatible = "ti,bq27541";
reg = <0x55>;
};
-
};
&gsbi3 {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
index 7752f07973f9e..28bd88eb5df55 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -395,7 +395,6 @@ tx-pins {
};
};
-
sdcc3_cd_pin_a: sdcc3-cd-pin-active-state {
pins = "gpio26";
function = "gpio";
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 0423b9380c812..150b5670e13b3 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -482,7 +482,6 @@ gsbi1_i2c: i2c@12460000 {
#size-cells = <0>;
status = "disabled";
};
-
};
gsbi2: gsbi@12480000 {
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 13/38] arm: dts: qcom: apq8064: Add space before line comments
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (11 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 12/38] arm: dts: qcom: apq8064: Remove empty line at end of node Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 14/38] arm: dts: qcom: apq8064: Align multiple property data Waqar Hameed
` (24 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There should be a space before start of comment delimiter. Found/fixed
with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
index 4111834b12012..1ae9de453ccf9 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
@@ -79,7 +79,7 @@ reboot-mode {
};
&dsi0 {
- vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
+ vdda-supply = <&pm8921_l2>; /* VDD_MIPI1 to 4 */
vdd-supply = <&pm8921_l8>;
vddio-supply = <&pm8921_lvs7>;
avdd-supply = <&pm8921_l11>;
@@ -114,7 +114,7 @@ &dsi0_out {
};
&dsi0_phy {
- vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/
+ vddio-supply = <&pm8921_lvs7>; /* VDD_PLL2_1 to 7 */
status = "okay";
};
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 14/38] arm: dts: qcom: apq8064: Align multiple property data
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (12 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 13/38] arm: dts: qcom: apq8064: Add space before line comments Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 15/38] arm: dts: qcom: apq8064: Remove tab after property name Waqar Hameed
` (23 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
Multiple property data on a newline should be aligned with the first one
or properly indented with tabs. Found/fixed with dtfmt (Devicetree
Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 98 ++++++++++++------------
1 file changed, 49 insertions(+), 49 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 150b5670e13b3..565f98c00b3fb 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -89,7 +89,7 @@ l2: l2-cache {
idle-states {
cpu_spc: cpu-spc {
compatible = "qcom,idle-state-spc",
- "arm,idle-state";
+ "arm,idle-state";
entry-latency-us = <400>;
exit-latency-us = <900>;
min-residency-us = <3000>;
@@ -1036,15 +1036,15 @@ gpu: gpu@4300000 {
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "kgsl_3d0_irq";
clock-names =
- "core",
- "iface",
- "mem",
- "mem_iface";
+ "core",
+ "iface",
+ "mem",
+ "mem_iface";
clocks =
- <&mmcc GFX3D_CLK>,
- <&mmcc GFX3D_AHB_CLK>,
- <&mmcc GFX3D_AXI_CLK>,
- <&mmcc MMSS_IMEM_AHB_CLK>;
+ <&mmcc GFX3D_CLK>,
+ <&mmcc GFX3D_AHB_CLK>,
+ <&mmcc GFX3D_AXI_CLK>,
+ <&mmcc MMSS_IMEM_AHB_CLK>;
iommus = <&gfx3d 0
&gfx3d 1
@@ -1141,24 +1141,24 @@ dsi0: dsi@4700000 {
reg-names = "dsi_ctrl";
clocks = <&mmcc DSI_M_AHB_CLK>,
- <&mmcc DSI_S_AHB_CLK>,
- <&mmcc AMP_AHB_CLK>,
- <&mmcc DSI_CLK>,
- <&mmcc DSI1_BYTE_CLK>,
- <&mmcc DSI_PIXEL_CLK>,
- <&mmcc DSI1_ESC_CLK>;
+ <&mmcc DSI_S_AHB_CLK>,
+ <&mmcc AMP_AHB_CLK>,
+ <&mmcc DSI_CLK>,
+ <&mmcc DSI1_BYTE_CLK>,
+ <&mmcc DSI_PIXEL_CLK>,
+ <&mmcc DSI1_ESC_CLK>;
clock-names = "iface", "bus", "core_mmss",
- "src", "byte", "pixel",
- "core";
+ "src", "byte", "pixel",
+ "core";
assigned-clocks = <&mmcc DSI1_BYTE_SRC>,
- <&mmcc DSI1_ESC_SRC>,
- <&mmcc DSI_SRC>,
- <&mmcc DSI_PIXEL_SRC>;
+ <&mmcc DSI1_ESC_SRC>,
+ <&mmcc DSI_SRC>,
+ <&mmcc DSI_PIXEL_SRC>;
assigned-clock-parents = <&dsi0_phy 0>,
- <&dsi0_phy 0>,
- <&dsi0_phy 1>,
- <&dsi0_phy 1>;
+ <&dsi0_phy 0>,
+ <&dsi0_phy 1>,
+ <&dsi0_phy 1>;
syscon-sfpb = <&mmss_sfpb>;
phys = <&dsi0_phy>;
status = "disabled";
@@ -1187,8 +1187,8 @@ dsi0_phy: phy@4700200 {
#phy-cells = <0>;
reg = <0x04700200 0x100>,
- <0x04700300 0x200>,
- <0x04700500 0x5c>;
+ <0x04700300 0x200>,
+ <0x04700500 0x5c>;
reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
clock-names = "iface", "ref";
clocks = <&mmcc DSI_M_AHB_CLK>,
@@ -1274,15 +1274,15 @@ mdp_port0: iommu@7500000 {
compatible = "qcom,apq8064-iommu";
#iommu-cells = <1>;
clock-names =
- "smmu_pclk",
- "iommu_clk";
+ "smmu_pclk",
+ "iommu_clk";
clocks =
- <&mmcc SMMU_AHB_CLK>,
- <&mmcc MDP_AXI_CLK>;
+ <&mmcc SMMU_AHB_CLK>,
+ <&mmcc MDP_AXI_CLK>;
reg = <0x07500000 0x100000>;
interrupts =
- <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
qcom,ncb = <2>;
};
@@ -1290,15 +1290,15 @@ mdp_port1: iommu@7600000 {
compatible = "qcom,apq8064-iommu";
#iommu-cells = <1>;
clock-names =
- "smmu_pclk",
- "iommu_clk";
+ "smmu_pclk",
+ "iommu_clk";
clocks =
- <&mmcc SMMU_AHB_CLK>,
- <&mmcc MDP_AXI_CLK>;
+ <&mmcc SMMU_AHB_CLK>,
+ <&mmcc MDP_AXI_CLK>;
reg = <0x07600000 0x100000>;
interrupts =
- <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
qcom,ncb = <2>;
};
@@ -1306,15 +1306,15 @@ gfx3d: iommu@7c00000 {
compatible = "qcom,apq8064-iommu";
#iommu-cells = <1>;
clock-names =
- "smmu_pclk",
- "iommu_clk";
+ "smmu_pclk",
+ "iommu_clk";
clocks =
- <&mmcc SMMU_AHB_CLK>,
- <&mmcc GFX3D_AXI_CLK>;
+ <&mmcc SMMU_AHB_CLK>,
+ <&mmcc GFX3D_AXI_CLK>;
reg = <0x07c00000 0x100000>;
interrupts =
- <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
qcom,ncb = <3>;
};
@@ -1322,15 +1322,15 @@ gfx3d1: iommu@7d00000 {
compatible = "qcom,apq8064-iommu";
#iommu-cells = <1>;
clock-names =
- "smmu_pclk",
- "iommu_clk";
+ "smmu_pclk",
+ "iommu_clk";
clocks =
- <&mmcc SMMU_AHB_CLK>,
- <&mmcc GFX3D_AXI_CLK>;
+ <&mmcc SMMU_AHB_CLK>,
+ <&mmcc GFX3D_AXI_CLK>;
reg = <0x07d00000 0x100000>;
interrupts =
- <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
qcom,ncb = <3>;
};
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 15/38] arm: dts: qcom: apq8064: Remove tab after property name
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (13 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 14/38] arm: dts: qcom: apq8064: Align multiple property data Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 16/38] arm: dts: qcom: ipq4018: Indent closing brace properly Waqar Hameed
` (22 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
These shouldn't have these to be consistent with rest of the style.
Found/fixed with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 565f98c00b3fb..3c7585ee00a7d 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -916,8 +916,8 @@ sata_phy0: phy@1b400000 {
sata0: sata@29000000 {
compatible = "qcom,apq8064-ahci", "generic-ahci";
- status = "disabled";
- reg = <0x29000000 0x180>;
+ status = "disabled";
+ reg = <0x29000000 0x180>;
interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SFAB_SATA_S_H_CLK>,
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 16/38] arm: dts: qcom: ipq4018: Indent closing brace properly
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (14 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 15/38] arm: dts: qcom: apq8064: Remove tab after property name Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 17/38] arm: dts: qcom: ipq4019: Add newline between subnodes Waqar Hameed
` (21 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
Closing brace of a node definition should be indented like subnode
name/reference. Found/fixed with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
index be76bc39ac277..d78623fd6acf3 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
@@ -260,8 +260,7 @@ &usb3_hs_phy {
&usb3 {
status = "okay";
-
- };
+};
&usb3_dwc {
phys = <&usb3_hs_phy>;
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 17/38] arm: dts: qcom: ipq4019: Add newline between subnodes
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (15 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 16/38] arm: dts: qcom: ipq4018: Indent closing brace properly Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 19/38] arm: dts: qcom: ipq4019: Break long property array data Waqar Hameed
` (20 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There should be a newline (and only one) between subnodes. Found/fixed
with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi | 1 +
arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi | 1 +
arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts | 1 +
arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi | 3 +++
4 files changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
index efbe89dd47937..a85c0aad7cf83 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
@@ -47,6 +47,7 @@ spi0-pins {
drive-strength = <12>;
bias-disable;
};
+
spi0-cs-pins {
pins = "gpio54";
function = "gpio";
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
index 91e296d2ea827..e998cb72c98db 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
@@ -43,6 +43,7 @@ spi0-pins {
pins = "gpio13", "gpio14", "gpio15";
bias-disable;
};
+
spi0-cs-pins {
function = "gpio";
pins = "gpio12";
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts
index 41c5874f6f976..71c5ba00ff982 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts
@@ -32,6 +32,7 @@ spi0-pins {
pins = "gpio13", "gpio14", "gpio15";
bias-disable;
};
+
spio-cs-pins {
function = "gpio";
pins = "gpio12";
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index 8eeaab1c0be11..6ff87808e2a0f 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -111,14 +111,17 @@ opp-48000000 {
opp-hz = /bits/ 64 <48000000>;
clock-latency-ns = <256000>;
};
+
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
clock-latency-ns = <256000>;
};
+
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
clock-latency-ns = <256000>;
};
+
opp-716000000 {
opp-hz = /bits/ 64 <716000000>;
clock-latency-ns = <256000>;
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 19/38] arm: dts: qcom: ipq4019: Break long property array data
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (16 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 17/38] arm: dts: qcom: ipq4019: Add newline between subnodes Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 18/38] arm: dts: qcom: ipq4019: Align multiple property data Waqar Hameed
` (19 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There is an awkward line break at the last elements expression. Put all
elements on a newline instead. Found/fixed with dtfmt (Devicetree Source
formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index 1fa1aef140a12..51721fedf7d60 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -135,8 +135,9 @@ memory {
pmu {
compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
- IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <
+ GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)
+ >;
};
clocks {
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 18/38] arm: dts: qcom: ipq4019: Align multiple property data
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (17 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 19/38] arm: dts: qcom: ipq4019: Break long property array data Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 21/38] arm: dts: qcom: ipq8064: " Waqar Hameed
` (18 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
Multiple property data on a newline should be aligned with the first
one. Found/fixed with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi | 10 +++++-----
arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts | 2 +-
arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi | 8 ++++----
3 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
index e998cb72c98db..faedcc0a76387 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
@@ -32,7 +32,7 @@ serial_0_pins: serial0-state {
serial_1_pins: serial1-state {
pins = "gpio8", "gpio9",
- "gpio10", "gpio11";
+ "gpio10", "gpio11";
function = "blsp_uart1";
bias-disable;
};
@@ -60,10 +60,10 @@ i2c_0_pins: i2c-0-state {
nand_pins: nand-state {
pins = "gpio53", "gpio55", "gpio56",
- "gpio57", "gpio58", "gpio59",
- "gpio60", "gpio62", "gpio63",
- "gpio64", "gpio65", "gpio66",
- "gpio67", "gpio68", "gpio69";
+ "gpio57", "gpio58", "gpio59",
+ "gpio60", "gpio62", "gpio63",
+ "gpio64", "gpio65", "gpio66",
+ "gpio67", "gpio68", "gpio69";
function = "qpic";
};
};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts
index 71c5ba00ff982..4230d71c48b16 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts
@@ -21,7 +21,7 @@ spi@78b6000 {
pinctrl@1000000 {
serial_1_pins: serial1-state {
pins = "gpio8", "gpio9",
- "gpio10", "gpio11";
+ "gpio10", "gpio11";
function = "blsp_uart1";
bias-disable;
};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index 6ff87808e2a0f..1fa1aef140a12 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -181,7 +181,7 @@ intc: interrupt-controller@b000000 {
#address-cells = <0>;
#interrupt-cells = <3>;
reg = <0x0b000000 0x1000>,
- <0x0b002000 0x1000>;
+ <0x0b002000 0x1000>;
};
gcc: clock-controller@1800000 {
@@ -268,7 +268,7 @@ blsp1_spi2: spi@78b6000 { /* BLSP1 QUP2 */
reg = <0x78b6000 0x600>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
+ <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
@@ -380,7 +380,7 @@ blsp1_uart1: serial@78af000 {
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
+ <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 0>, <&blsp_dma 1>;
dma-names = "tx", "rx";
@@ -392,7 +392,7 @@ blsp1_uart2: serial@78b0000 {
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
+ <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 2>, <&blsp_dma 3>;
dma-names = "tx", "rx";
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 21/38] arm: dts: qcom: ipq8064: Align multiple property data
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (18 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 18/38] arm: dts: qcom: ipq4019: Align multiple property data Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 20/38] arm: dts: qcom: ipq8064: Add newline between subnodes Waqar Hameed
` (17 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
Multiple property data on a newline should be aligned with the first
one. Found/fixed with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index 2b3a3ec4e03d8..24632af28d52e 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -353,8 +353,8 @@ rpm: rpm@108000 {
qcom,ipc = <&l2cc 0x8 2>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ack", "err", "wakeup";
clocks = <&gcc RPM_MSG_RAM_H_CLK>;
@@ -438,7 +438,7 @@ spi_pins: spi-state {
leds_pins: leds-state {
pins = "gpio7", "gpio8", "gpio9",
- "gpio26", "gpio53";
+ "gpio26", "gpio53";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
@@ -489,9 +489,9 @@ mdio0_pins: mdio0-state {
rgmii2_pins: rgmii2-state {
pins = "gpio27", "gpio28", "gpio29",
- "gpio30", "gpio31", "gpio32",
- "gpio51", "gpio52", "gpio59",
- "gpio60", "gpio61", "gpio62";
+ "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59",
+ "gpio60", "gpio61", "gpio62";
function = "rgmii2";
drive-strength = <8>;
bias-disable;
@@ -1257,11 +1257,11 @@ lpass@28100000 {
compatible = "qcom,lpass-cpu";
status = "disabled";
clocks = <&lcc AHBIX_CLK>,
- <&lcc MI2S_OSR_CLK>,
- <&lcc MI2S_BIT_CLK>;
+ <&lcc MI2S_OSR_CLK>,
+ <&lcc MI2S_BIT_CLK>;
clock-names = "ahbix-clk",
- "mi2s-osr-clk",
- "mi2s-bit-clk";
+ "mi2s-osr-clk",
+ "mi2s-bit-clk";
interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "lpass-irq-lpaif";
reg = <0x28100000 0x10000>;
@@ -1280,7 +1280,7 @@ sata: sata@29000000 {
<&gcc SATA_RXOOB_CLK>,
<&gcc SATA_PMALIVE_CLK>;
clock-names = "slave_iface", "iface", "core",
- "rxoob", "pmalive";
+ "rxoob", "pmalive";
assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
assigned-clock-rates = <100000000>, <100000000>;
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 20/38] arm: dts: qcom: ipq8064: Add newline between subnodes
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (19 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 21/38] arm: dts: qcom: ipq8064: " Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 22/38] arm: dts: qcom: ipq8064: Break long property array data Waqar Hameed
` (16 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There should be a newline between subnodes. Found/fixed with
dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi | 1 +
arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0.dtsi | 1 +
arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi | 2 ++
3 files changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi
index 49de9752632f6..316dbe55bec8b 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi
@@ -26,6 +26,7 @@ button-1 {
linux,input-type = <1>;
debounce-interval = <60>;
};
+
button-2 {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0.dtsi
index 2f117d576daf3..deece92f610f3 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0.dtsi
@@ -32,6 +32,7 @@ &gsbi4 {
serial@16340000 {
status = "okay";
};
+
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index 1a278503d3401..2b3a3ec4e03d8 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -380,9 +380,11 @@ qfprom: efuse@700000 {
speedbin_efuse: speedbin@c0 {
reg = <0xc0 0x4>;
};
+
tsens_calib: calib@400 {
reg = <0x400 0xb>;
};
+
tsens_calib_backup: calib-backup@410 {
reg = <0x410 0xb>;
};
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 22/38] arm: dts: qcom: ipq8064: Break long property array data
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (20 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 20/38] arm: dts: qcom: ipq8064: Add newline between subnodes Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 23/38] arm: dts: qcom: msm8226: Add space between OR-operator Waqar Hameed
` (15 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There is an awkward line break at the last elements expression. Put all
elements on a newline instead. Found/fixed with dtfmt (Devicetree Source
formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index 24632af28d52e..d2b576a37c47d 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -278,8 +278,9 @@ memory {
cpu-pmu {
compatible = "qcom,krait-pmu";
- interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <
+ GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)
+ >;
};
reserved-memory {
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 23/38] arm: dts: qcom: msm8226: Add space between OR-operator
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (21 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 22/38] arm: dts: qcom: ipq8064: Break long property array data Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 25/38] arm: dts: qcom: ipq8064: Break long property array data Waqar Hameed
` (14 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There should be a space between binary operators. Found/fixed with
dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
.../boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
index f1544a7e8369c..fc4d7ad8d2ab5 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
@@ -82,8 +82,8 @@ key-volume-up {
i2c-backlight {
compatible = "i2c-gpio";
- sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
pinctrl-0 = <&backlight_i2c_default_state>;
pinctrl-names = "default";
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 25/38] arm: dts: qcom: ipq8064: Break long property array data
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (22 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 23/38] arm: dts: qcom: msm8226: Add space between OR-operator Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 24/38] arm: dts: qcom: msm8226: Add newline between subnodes Waqar Hameed
` (13 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There is an awkward line break at the last elements expression. Put all
elements on a newline instead. Found/fixed with dtfmt (Devicetree Source
formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-msm8226.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
index 14605d7666e68..346aef4a1d9f5 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
@@ -137,8 +137,9 @@ opp-787200000 {
pmu {
compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
- IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <
+ GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)
+ >;
};
rpm: remoteproc {
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 24/38] arm: dts: qcom: msm8226: Add newline between subnodes
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (23 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 25/38] arm: dts: qcom: ipq8064: Break long property array data Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 26/38] arm: dts: qcom: msm8226: Align multiple property data Waqar Hameed
` (12 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There should be a newline between subnodes. Found/fixed with
dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-msm8226.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
index bcf14a3b13a1b..14605d7666e68 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
@@ -183,18 +183,23 @@ rpmpd_opp_table: opp-table {
rpmpd_opp_ret: opp1 {
opp-level = <1>;
};
+
rpmpd_opp_svs_krait: opp2 {
opp-level = <2>;
};
+
rpmpd_opp_svs_soc: opp3 {
opp-level = <3>;
};
+
rpmpd_opp_nom: opp4 {
opp-level = <4>;
};
+
rpmpd_opp_turbo: opp5 {
opp-level = <5>;
};
+
rpmpd_opp_super_turbo: opp6 {
opp-level = <6>;
};
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 26/38] arm: dts: qcom: msm8226: Align multiple property data
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (24 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 24/38] arm: dts: qcom: msm8226: Add newline between subnodes Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 27/38] arm: dts: qcom: msm8660: Remove empty line at end of node Waqar Hameed
` (11 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
Multiple property data on a newline should be aligned with the first
one. Found/fixed with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-msm8226.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
index 346aef4a1d9f5..ac18744b50924 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
@@ -1483,12 +1483,12 @@ cpu_crit1: trip1 {
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 2
- (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3
- (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 4
- (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1
- (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
+ (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
};
};
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 27/38] arm: dts: qcom: msm8660: Remove empty line at end of node
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (25 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 26/38] arm: dts: qcom: msm8226: Align multiple property data Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 28/38] arm: dts: qcom: msm8660: Remove space inside array property Waqar Hameed
` (10 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There shouldn't be an empty line at end of node definition. Found/fixed
with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-msm8660.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
index 3f69b98d0041e..7440ea621df59 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -107,7 +107,6 @@ tlmm: pinctrl@800000 {
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
-
};
gcc: clock-controller@900000 {
@@ -430,5 +429,4 @@ tcsr: syscon@1a400000 {
reg = <0x1a400000 0x100>;
};
};
-
};
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 28/38] arm: dts: qcom: msm8660: Remove space inside array property
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (26 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 27/38] arm: dts: qcom: msm8660: Remove empty line at end of node Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 29/38] arm: dts: qcom: msm8660: Align closing array bracket Waqar Hameed
` (9 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There shouldn't be spaces at the beginning and end of an property array.
Found/fixed with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-msm8660.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
index 7440ea621df59..5af3de24b21ef 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -83,8 +83,8 @@ intc: interrupt-controller@2080000 {
compatible = "qcom,msm-8660-qgic";
interrupt-controller;
#interrupt-cells = <3>;
- reg = < 0x02080000 0x1000 >,
- < 0x02081000 0x1000 >;
+ reg = <0x02080000 0x1000>,
+ <0x02081000 0x1000>;
};
timer@2000000 {
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 29/38] arm: dts: qcom: msm8660: Align closing array bracket
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (27 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 28/38] arm: dts: qcom: msm8660: Remove space inside array property Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 30/38] arm: dts: qcom: msm8916: Add newline between subnodes Waqar Hameed
` (8 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
Closing angle bracket of an array should be indented like property name.
Found/fixed with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
index 69fe651f564d2..c58d5ffdc678c 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
@@ -60,7 +60,7 @@ MATRIX_KEY(5, 1, KEY_RIGHT)
MATRIX_KEY(5, 2, KEY_DOWN)
MATRIX_KEY(5, 3, KEY_BACK)
MATRIX_KEY(5, 4, KEY_MENU)
- >;
+ >;
keypad,num-rows = <6>;
keypad,num-columns = <5>;
};
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 30/38] arm: dts: qcom: msm8916: Add newline between subnodes
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (28 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 29/38] arm: dts: qcom: msm8660: Align closing array bracket Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 31/38] arm: dts: qcom: msm8960: Properly indent subnodes Waqar Hameed
` (7 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There should be a newline between subnodes. Found/fixed with
dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi
index 94b7694eeeffa..f286679a6af07 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi
@@ -5,12 +5,15 @@ cpus {
cpu@0 {
enable-method = "qcom,msm8916-smp";
};
+
cpu@1 {
enable-method = "qcom,msm8916-smp";
};
+
cpu@2 {
enable-method = "qcom,msm8916-smp";
};
+
cpu@3 {
enable-method = "qcom,msm8916-smp";
};
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 31/38] arm: dts: qcom: msm8960: Properly indent subnodes
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (29 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 30/38] arm: dts: qcom: msm8916: Add newline between subnodes Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 32/38] arm: dts: qcom: msm8660: Align closing array bracket Waqar Hameed
` (6 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
Subnodes should be indented with tabs only. Found/fixed with
dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
index 1df078d7d89b8..bd0665727277a 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
@@ -58,34 +58,34 @@ &gsbi5_serial {
&tlmm {
spi1_default: spi1-default-state {
- mosi-pins {
+ mosi-pins {
pins = "gpio6";
function = "gsbi1";
drive-strength = <12>;
bias-disable;
- };
+ };
- miso-pins {
+ miso-pins {
pins = "gpio7";
function = "gsbi1";
drive-strength = <12>;
bias-disable;
- };
+ };
- cs-pins {
+ cs-pins {
pins = "gpio8";
function = "gsbi1";
drive-strength = <12>;
bias-disable;
output-low;
- };
+ };
- clk-pins {
+ clk-pins {
pins = "gpio9";
function = "gsbi1";
drive-strength = <12>;
bias-disable;
- };
+ };
};
};
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 32/38] arm: dts: qcom: msm8660: Align closing array bracket
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (30 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 31/38] arm: dts: qcom: msm8960: Properly indent subnodes Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 33/38] arm: dts: qcom: msm8974: Align multiple property data Waqar Hameed
` (5 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
Closing angle bracket of an array should be indented like property name.
Found/fixed with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
index bd0665727277a..174af88fd7a5d 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
@@ -99,7 +99,7 @@ MATRIX_KEY(0, 0, KEY_VOLUMEUP)
MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
MATRIX_KEY(0, 3, KEY_CAMERA)
- >;
+ >;
keypad,num-rows = <1>;
keypad,num-columns = <5>;
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 33/38] arm: dts: qcom: msm8974: Align multiple property data
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (31 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 32/38] arm: dts: qcom: msm8660: Align closing array bracket Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 34/38] arm: dts: qcom: msm8974: Align closing brace properly Waqar Hameed
` (4 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
Multiple property data on a newline should be aligned with the first
one. Found/fixed with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
index f300de74c47d4..ccf66f45ea7c3 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -92,7 +92,7 @@ l2: l2-cache {
idle-states {
cpu_spc: cpu-spc {
compatible = "qcom,idle-state-spc",
- "arm,idle-state";
+ "arm,idle-state";
entry-latency-us = <150>;
exit-latency-us = <200>;
min-residency-us = <2000>;
@@ -2228,10 +2228,10 @@ remoteproc_adsp: remoteproc@fe200000 {
reg = <0xfe200000 0x100>;
interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
clocks = <&xo_board>;
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 34/38] arm: dts: qcom: msm8974: Align closing brace properly
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (32 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 33/38] arm: dts: qcom: msm8974: Align multiple property data Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 35/38] arm: dts: qcom: msm8974: Add newline between subnodes Waqar Hameed
` (3 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
Closing brace of a node definition should be indented like subnode name.
Found/fixed with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
index ccf66f45ea7c3..4c2730b34cd1d 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -867,7 +867,7 @@ port {
tpiu_in: endpoint {
remote-endpoint = <&replicator_out1>;
};
- };
+ };
};
};
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 35/38] arm: dts: qcom: msm8974: Add newline between subnodes
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (33 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 34/38] arm: dts: qcom: msm8974: Align closing brace properly Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 37/38] arm: dts: qcom: sdx65: Remove empty line at end of node Waqar Hameed
` (2 subsequent siblings)
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There should be a newline between subnodes. Found/fixed with
dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
index 4c2730b34cd1d..1a2f0cc9f8a03 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -960,6 +960,7 @@ replicator_out0: endpoint {
remote-endpoint = <&etr_in>;
};
};
+
port@1 {
reg = <1>;
replicator_out1: endpoint {
@@ -1083,18 +1084,21 @@ kpss_in0: endpoint {
remote-endpoint = <&etm0_out>;
};
};
+
port@1 {
reg = <1>;
kpss_in1: endpoint {
remote-endpoint = <&etm1_out>;
};
};
+
port@2 {
reg = <2>;
kpss_in2: endpoint {
remote-endpoint = <&etm2_out>;
};
};
+
port@3 {
reg = <3>;
kpss_in3: endpoint {
@@ -1785,6 +1789,7 @@ blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
drive-strength = <2>;
bias-pull-up;
};
+
/* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
/* BLSP2_I2C1 info is missing */
@@ -1872,14 +1877,17 @@ mosi-pins {
pins = "gpio45";
function = "blsp_spi8";
};
+
miso-pins {
pins = "gpio46";
function = "blsp_spi8";
};
+
cs-pins {
pins = "gpio47";
function = "blsp_spi8";
};
+
clk-pins {
pins = "gpio48";
function = "blsp_spi8";
@@ -2280,6 +2288,7 @@ cpu_alert0: trip0 {
hysteresis = <2000>;
type = "passive";
};
+
cpu_crit0: trip1 {
temperature = <110000>;
hysteresis = <2000>;
@@ -2300,6 +2309,7 @@ cpu_alert1: trip0 {
hysteresis = <2000>;
type = "passive";
};
+
cpu_crit1: trip1 {
temperature = <110000>;
hysteresis = <2000>;
@@ -2320,6 +2330,7 @@ cpu_alert2: trip0 {
hysteresis = <2000>;
type = "passive";
};
+
cpu_crit2: trip1 {
temperature = <110000>;
hysteresis = <2000>;
@@ -2340,6 +2351,7 @@ cpu_alert3: trip0 {
hysteresis = <2000>;
type = "passive";
};
+
cpu_crit3: trip1 {
temperature = <110000>;
hysteresis = <2000>;
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 37/38] arm: dts: qcom: sdx65: Remove empty line at end of node
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (34 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 35/38] arm: dts: qcom: msm8974: Add newline between subnodes Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 36/38] arm: dts: qcom: sdx55: Properly indent subnode Waqar Hameed
2026-10-01 22:36 ` [PATCH 38/38] arm: dts: qcom: sdx65: Align multiple property data Waqar Hameed
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
There shouldn't be an empty line at end of node definition. Found/fixed
with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-sdx65.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
index c8e312dcd26b0..c1c5b574424dd 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
@@ -261,7 +261,6 @@ usb_qmpphy: phy@ff6000 {
"phy_phy";
status = "disabled";
-
};
system_noc: interconnect@1620000 {
@@ -807,7 +806,6 @@ rpmhpd_opp_turbo_l1: opp10 {
apps_bcm_voter: bcm-voter {
compatible = "qcom,bcm-voter";
};
-
};
};
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 36/38] arm: dts: qcom: sdx55: Properly indent subnode
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (35 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 37/38] arm: dts: qcom: sdx65: Remove empty line at end of node Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
2026-10-01 22:36 ` [PATCH 38/38] arm: dts: qcom: sdx65: Align multiple property data Waqar Hameed
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
Subnodes should be indented with tabs only. Found/fixed with
dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
index 0443a86899a9c..cd57292e3bfd3 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
@@ -297,11 +297,11 @@ perst-pins {
};
wake-pins {
- pins = "gpio53";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
+ pins = "gpio53";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
};
};
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 38/38] arm: dts: qcom: sdx65: Align multiple property data
2026-10-01 22:36 [PATCH 00/38] arm: dts: qcom: Format with dtfmt Waqar Hameed
` (36 preceding siblings ...)
2026-10-01 22:36 ` [PATCH 36/38] arm: dts: qcom: sdx55: Properly indent subnode Waqar Hameed
@ 2026-10-01 22:36 ` Waqar Hameed
37 siblings, 0 replies; 39+ messages in thread
From: Waqar Hameed @ 2026-10-01 22:36 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: kernel, linux-arm-msm, devicetree, linux-kernel
Multiple property data on a newline should be aligned with the first
one. Found/fixed with dtfmt (Devicetree Source formatter).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
---
arch/arm/boot/dts/qcom/qcom-sdx65.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
index c1c5b574424dd..9814f20e6e167 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
@@ -544,10 +544,10 @@ restart@c264000 {
spmi_bus: spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0xc440000 0xd00>,
- <0xc600000 0x2000000>,
- <0xe600000 0x100000>,
- <0xe700000 0xa0000>,
- <0xc40a000 0x26000>;
+ <0xc600000 0x2000000>,
+ <0xe600000 0x100000>,
+ <0xe700000 0xa0000>,
+ <0xc40a000 0x26000>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "periph_irq";
@@ -735,10 +735,10 @@ apps_rsc: rsc@17830000 {
label = "apps_rsc";
compatible = "qcom,rpmh-rsc";
reg = <0x17830000 0x10000>,
- <0x17840000 0x10000>;
+ <0x17840000 0x10000>;
reg-names = "drv-0", "drv-1";
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
qcom,tcs-offset = <0xd00>;
qcom,drv-id = <1>;
qcom,tcs-config = <ACTIVE_TCS 2>,
--
2.43.0
^ permalink raw reply [flat|nested] 39+ messages in thread