From: <Ryan.Wanner@microchip.com>
To: <andrew+netdev@lunn.ch>, <davem@davemloft.net>,
<edumazet@google.com>, <kuba@kernel.org>, <pabeni@redhat.com>,
<robh@kernel.org>, <krzk+dt@kernel.org>, <onor+dt@kernel.org>,
<alexandre.belloni@bootlin.com>, <claudiu.beznea@tuxon.dev>
Cc: <nicolas.ferre@microchip.com>, <netdev@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Ryan Wanner <Ryan.Wanner@microchip.com>
Subject: [PATCH 3/6] ARM: dts: microchip: sama7d65: Add FLEXCOMs to sama7d65 SoC
Date: Tue, 1 Apr 2025 09:13:19 -0700 [thread overview]
Message-ID: <d474fcd850978261ac889950ac1c3a36bc6d3926.1743523114.git.Ryan.Wanner@microchip.com> (raw)
In-Reply-To: <cover.1743523114.git.Ryan.Wanner@microchip.com>
From: Ryan Wanner <Ryan.Wanner@microchip.com>
Add FLEXCOMs to the SAMA7D65 SoC device tree.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
---
arch/arm/boot/dts/microchip/sama7d65.dtsi | 267 ++++++++++++++++++++++
1 file changed, 267 insertions(+)
diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi
index cd17b838e179..9f453c686dc6 100644
--- a/arch/arm/boot/dts/microchip/sama7d65.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi
@@ -217,6 +217,199 @@ pit64b1: timer@e1804000 {
clock-names = "pclk", "gclk";
};
+ flx0: flexcom@e1820000 {
+ compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xe1820000 0x200>;
+ ranges = <0x0 0xe1820000 0x800>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+
+ uart0: serial@200 {
+ compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+ clock-names = "usart";
+ dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
+ <&dma1 AT91_XDMAC_DT_PERID(5)>;
+ dma-names = "tx", "rx";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@600 {
+ compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ atmel,fifo-size = <32>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(6)>,
+ <&dma0 AT91_XDMAC_DT_PERID(5)>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+ };
+
+ flx1: flexcom@e1824000 {
+ compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xe1824000 0x200>;
+ ranges = <0x0 0xe1824000 0x800>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+
+ spi1: spi@400 {
+ compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+ clock-names = "spi_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ atmel,fifo-size = <32>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
+ <&dma0 AT91_XDMAC_DT_PERID(7)>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ i2c1: i2c@600 {
+ compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ atmel,fifo-size = <32>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
+ <&dma0 AT91_XDMAC_DT_PERID(7)>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+ };
+
+ flx2: flexcom@e1828000 {
+ compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xe1828000 0x200>;
+ ranges = <0x0 0xe1828000 0x800>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+
+ uart2: serial@200 {
+ compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
+ clock-names = "usart";
+ dmas = <&dma1 AT91_XDMAC_DT_PERID(10)>,
+ <&dma1 AT91_XDMAC_DT_PERID(9)>;
+ dma-names = "tx", "rx";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+ status = "disabled";
+ };
+ };
+
+ flx3: flexcom@e182c000 {
+ compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xe182c000 0x200>;
+ ranges = <0x0 0xe182c000 0x800>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+
+ i2c3: i2c@600 {
+ compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ atmel,fifo-size = <32>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
+ <&dma0 AT91_XDMAC_DT_PERID(11)>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ };
+
+ flx4: flexcom@e2018000 {
+ compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xe2018000 0x200>;
+ ranges = <0x0 0xe2018000 0x800>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+
+ uart4: serial@200 {
+ compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+ clock-names = "usart";
+ dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
+ <&dma1 AT91_XDMAC_DT_PERID(13)>;
+ dma-names = "tx", "rx";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ atmel,fifo-size = <16>;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+ status = "disabled";
+ };
+
+ spi4: spi@400 {
+ compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+ clock-names = "spi_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ atmel,fifo-size = <32>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>,
+ <&dma0 AT91_XDMAC_DT_PERID(13)>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+ };
+
+ flx5: flexcom@e201c000 {
+ compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xe201c000 0x200>;
+ ranges = <0x0 0xe201c000 0x800>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+
+ i2c5: i2c@600 {
+ compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ atmel,fifo-size = <32>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(16)>,
+ <&dma0 AT91_XDMAC_DT_PERID(15)>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+ };
+
flx6: flexcom@e2020000 {
compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe2020000 0x200>;
@@ -238,6 +431,80 @@ uart6: serial@200 {
};
};
+ flx7: flexcom@e2024000 {
+ compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xe2024000 0x200>;
+ ranges = <0x0 0xe2024000 0x800>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+
+ uart7: serial@200 {
+ compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+ clock-names = "usart";
+ dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
+ <&dma1 AT91_XDMAC_DT_PERID(19)>;
+ dma-names = "tx", "rx";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ atmel,fifo-size = <16>;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+ status = "disabled";
+ };
+ };
+
+ flx8: flexcom@e281c000{
+ compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xe281c000 0x200>;
+ ranges = <0x0 0xe281c000 0x800>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+
+ i2c8: i2c@600 {
+ compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ atmel,fifo-size = <32>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
+ <&dma0 AT91_XDMAC_DT_PERID(21)>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+ };
+
+ flx9: flexcom@e2820000 {
+ compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xe2820000 0x200>;
+ ranges = <0x0 0xe281c000 0x800>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+
+ i2c9: i2c@600 {
+ compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ atmel,fifo-size = <32>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
+ <&dma0 AT91_XDMAC_DT_PERID(23)>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+ };
+
flx10: flexcom@e2824000 {
compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe2824000 0x200>;
--
2.43.0
next prev parent reply other threads:[~2025-04-01 16:13 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-01 16:13 [PATCH 0/6] Enable FLEXCOMs and GMAC for SAMA7D65 SoC Ryan.Wanner
2025-04-01 16:13 ` [PATCH 1/6] dt-bindings: net: cdns,macb: add sama7d65 ethernet interface Ryan.Wanner
2025-04-02 0:54 ` Jakub Kicinski
2025-04-02 13:28 ` Conor Dooley
2025-04-01 16:13 ` [PATCH 2/6] ARM: dts: microchip: sama7d65: Add gmac interfaces for sama7d65 SoC Ryan.Wanner
2025-04-01 16:13 ` Ryan.Wanner [this message]
2025-04-11 14:29 ` [PATCH 3/6] ARM: dts: microchip: sama7d65: Add FLEXCOMs to " Claudiu Beznea
2025-04-01 16:13 ` [PATCH 4/6] ARM: dts: microchip: sama7d65: Enable GMAC interface Ryan.Wanner
2025-04-11 14:29 ` Claudiu Beznea
2025-04-01 16:13 ` [PATCH 5/6] ARM: dts: microchip: sama7d65: Add MCP16502 to sama7d65 curiosity Ryan.Wanner
2025-04-11 14:30 ` Claudiu Beznea
2025-04-14 15:38 ` Ryan.Wanner
2025-04-27 13:43 ` Claudiu Beznea
2025-04-01 16:13 ` [PATCH 6/6] ARM: dts: microchip: sama7d65_curiosity: add EEPROM Ryan.Wanner
2025-04-27 13:44 ` [PATCH 0/6] Enable FLEXCOMs and GMAC for SAMA7D65 SoC Claudiu Beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d474fcd850978261ac889950ac1c3a36bc6d3926.1743523114.git.Ryan.Wanner@microchip.com \
--to=ryan.wanner@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andrew+netdev@lunn.ch \
--cc=claudiu.beznea@tuxon.dev \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=onor+dt@kernel.org \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®