[PATCH 4/6] ARM: dts: microchip: sama7d65: Enable GMAC interface

[<Ryan.Wanner@microchip.com>]

From: Ryan Wanner <Ryan.Wanner@microchip.com>

Enable GMAC0 interface for sama7d65_curiosity board.

Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
---
 .../dts/microchip/at91-sama7d65_curiosity.dts | 51 +++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
index 30fdc4f55a3b..441370dbb4c2 100644
--- a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
@@ -105,7 +105,58 @@ &main_xtal {
 	clock-frequency = <24000000>;
 };
 
+&gmac0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gmac0_default
+		     &pinctrl_gmac0_mdio_default
+		     &pinctrl_gmac0_txck_default
+		     &pinctrl_gmac0_phy_irq>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	ethernet-phy@7 {
+		reg = <0x7>;
+		interrupt-parent = <&pioa>;
+		interrupts = <PIN_PC1 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+	};
+};
 &pioa {
+	pinctrl_gmac0_default: gmac0-default {
+		pinmux = <PIN_PA26__G0_TX0>,
+			 <PIN_PA27__G0_TX1>,
+			 <PIN_PB4__G0_TX2>,
+			 <PIN_PB5__G0_TX3>,
+			 <PIN_PA29__G0_RX0>,
+			 <PIN_PA30__G0_RX1>,
+			 <PIN_PB2__G0_RX2>,
+			 <PIN_PB6__G0_RX3>,
+			 <PIN_PA25__G0_TXCTL>,
+			 <PIN_PB3__G0_RXCK>,
+			 <PIN_PA28__G0_RXCTL>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_mdio_default: gmac0-mdio-default {
+		pinmux = <PIN_PA31__G0_MDC>,
+			 <PIN_PB0__G0_MDIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_phy_irq: gmac0-phy-irq {
+		pinmux = <PIN_PC1__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_txck_default: gmac0-txck-default {
+		pinmux = <PIN_PB1__G0_REFCK>;
+		slew-rate = <0>;
+		bias-pull-up;
+	};
+
 	pinctrl_i2c10_default: i2c10-default{
 		pinmux = <PIN_PB19__FLEXCOM10_IO1>,
 			 <PIN_PB20__FLEXCOM10_IO0>;
-- 
2.43.0