* [PATCH] arm64: dts: qcom: x1e80100: Add HS PHY IRQs to USB1 SS[0-2]
@ 2024-08-09 10:12 Abel Vesa
2024-08-09 10:26 ` Krzysztof Kozlowski
0 siblings, 1 reply; 2+ messages in thread
From: Abel Vesa @ 2024-08-09 10:12 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Sibi Sankar, Rajendra Nayak
Cc: Johan Hovold, linux-arm-msm, devicetree, linux-kernel, Abel Vesa
Add missing HS PHY IRQs to all 3 USB1 SS instances.
Fixes: 4af46b7bd66f ("arm64: dts: qcom: x1e80100: Add USB nodes")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index 326283822aee..254643650fa7 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -3871,10 +3871,12 @@ usb_1_ss2: usb@a0f8800 {
<200000000>;
interrupts-extended = <&intc GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 58 IRQ_TYPE_EDGE_BOTH>,
<&pdc 57 IRQ_TYPE_EDGE_BOTH>,
<&pdc 10 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "pwr_event",
+ "hs_phy_irq",
"dp_hs_phy_irq",
"dm_hs_phy_irq",
"ss_phy_irq";
@@ -4045,10 +4047,12 @@ usb_1_ss0: usb@a6f8800 {
<200000000>;
interrupts-extended = <&intc GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 61 IRQ_TYPE_EDGE_BOTH>,
<&pdc 15 IRQ_TYPE_EDGE_BOTH>,
<&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "pwr_event",
+ "hs_phy_irq",
"dp_hs_phy_irq",
"dm_hs_phy_irq",
"ss_phy_irq";
@@ -4136,10 +4140,12 @@ usb_1_ss1: usb@a8f8800 {
<200000000>;
interrupts-extended = <&intc GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 60 IRQ_TYPE_EDGE_BOTH>,
<&pdc 11 IRQ_TYPE_EDGE_BOTH>,
<&pdc 47 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "pwr_event",
+ "hs_phy_irq",
"dp_hs_phy_irq",
"dm_hs_phy_irq",
"ss_phy_irq";
---
base-commit: 61c01d2e181adfba02fe09764f9fca1de2be0dbe
change-id: 20240726-x1e80100-dts-usb-1-ss0-2-add-hs-phy-irqs-0d483addf0c5
Best regards,
--
Abel Vesa <abel.vesa@linaro.org>
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [PATCH] arm64: dts: qcom: x1e80100: Add HS PHY IRQs to USB1 SS[0-2]
2024-08-09 10:12 [PATCH] arm64: dts: qcom: x1e80100: Add HS PHY IRQs to USB1 SS[0-2] Abel Vesa
@ 2024-08-09 10:26 ` Krzysztof Kozlowski
0 siblings, 0 replies; 2+ messages in thread
From: Krzysztof Kozlowski @ 2024-08-09 10:26 UTC (permalink / raw)
To: Abel Vesa, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Sibi Sankar, Rajendra Nayak
Cc: Johan Hovold, linux-arm-msm, devicetree, linux-kernel
On 09/08/2024 12:12, Abel Vesa wrote:
> Add missing HS PHY IRQs to all 3 USB1 SS instances.
>
> Fixes: 4af46b7bd66f ("arm64: dts: qcom: x1e80100: Add USB nodes")
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/x1e80100.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> index 326283822aee..254643650fa7 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> @@ -3871,10 +3871,12 @@ usb_1_ss2: usb@a0f8800 {
> <200000000>;
>
> interrupts-extended = <&intc GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
> + <&intc GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
> <&pdc 58 IRQ_TYPE_EDGE_BOTH>,
> <&pdc 57 IRQ_TYPE_EDGE_BOTH>,
> <&pdc 10 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "pwr_event",
> + "hs_phy_irq",
I think current bindings disagree with this. If there is a binding
update, please post a link.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-08-09 10:26 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-08-09 10:12 [PATCH] arm64: dts: qcom: x1e80100: Add HS PHY IRQs to USB1 SS[0-2] Abel Vesa
2024-08-09 10:26 ` Krzysztof Kozlowski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®