[RFT PATCH 00/14] arm64: dts: qcom: improvements to TCSR mutex in DTS

[RFT PATCH 00/14] arm64: dts: qcom: improvements to TCSR mutex in DTS

[Krzysztof Kozlowski]

Hi,

Set of improvements for TCSR mutex to match the bindings after conversion to DT schema.

Tested briefly on SDM845. Please kindly test on other platformss (therefore RFT).

Best regards,
Krzysztof

Krzysztof Kozlowski (14):
  dt-bindings: mfd: qcom,tcsr: add SC7x80, SDM845 and MSM8996/8
  arm64: dts: qcom: msm8996: split TCSR halt regs out of mutex
  arm64: dts: qcom: msm8996: switch TCSR mutex to MMIO
  arm64: dts: qcom: msm8998: split TCSR halt regs out of mutex
  arm64: dts: qcom: msm8998: switch TCSR mutex to MMIO
  arm64: dts: qcom: sc7180: add missing TCSR syscon compatible
  arm64: dts: qcom: sc7180: split TCSR halt regs out of mutex
  arm64: dts: qcom: sc7180: switch TCSR mutex to MMIO
  arm64: dts: qcom: sc7280: split TCSR halt regs out of mutex
  arm64: dts: qcom: sdm845: split TCSR halt regs out of mutex
  arm64: dts: qcom: sdm845: switch TCSR mutex to MMIO
  arm64: dts: qcom: qcs404: switch TCSR mutex to MMIO
  arm64: dts: qcom: sdm630: switch TCSR mutex to MMIO
  arm64: dts: qcom: sm8150: switch TCSR mutex to MMIO

 .../devicetree/bindings/mfd/qcom,tcsr.yaml    |  5 ++++
 arch/arm64/boot/dts/qcom/msm8996.dtsi         | 24 ++++++++---------
 arch/arm64/boot/dts/qcom/msm8998.dtsi         | 20 +++++++-------
 arch/arm64/boot/dts/qcom/qcs404.dtsi          | 11 +++-----
 arch/arm64/boot/dts/qcom/sc7180.dtsi          | 26 +++++++++----------
 arch/arm64/boot/dts/qcom/sc7280.dtsi          | 19 +++++++++-----
 arch/arm64/boot/dts/qcom/sdm630.dtsi          | 13 +++-------
 arch/arm64/boot/dts/qcom/sdm845.dtsi          | 20 +++++++-------
 arch/arm64/boot/dts/qcom/sm8150.dtsi          | 13 +++-------
 9 files changed, 73 insertions(+), 78 deletions(-)

-- 
2.34.1

[RFT PATCH 01/14] dt-bindings: mfd: qcom,tcsr: add SC7180, SC7280, SDM845 and MSM8998

[Krzysztof Kozlowski]

Document existing (SC7280) and new compatibles for TCSR syscon
registers.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
index 2f816fd0c9ec..849295b058b6 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
@@ -18,6 +18,10 @@ properties:
     oneOf:
       - items:
           - enum:
+              - qcom,sc7180-tcsr
+              - qcom,sc7280-tcsr
+              - qcom,sdm845-tcsr
+              - qcom,msm8998-tcsr
               - qcom,tcsr-apq8064
               - qcom,tcsr-apq8084
               - qcom,tcsr-ipq8064
-- 
2.34.1

[RFT PATCH 01/14] dt-bindings: mfd: qcom,tcsr: add SC7x80, SDM845 and MSM8996/8

[Krzysztof Kozlowski]

Document existing (MSM8996, SC7280) and new compatibles for TCSR syscon
registers.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
index 2f816fd0c9ec..19bc1cc5e0c5 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
@@ -18,6 +18,10 @@ properties:
     oneOf:
       - items:
           - enum:
+              - qcom,sc7180-tcsr
+              - qcom,sc7280-tcsr
+              - qcom,sdm845-tcsr
+              - qcom,msm8998-tcsr
               - qcom,tcsr-apq8064
               - qcom,tcsr-apq8084
               - qcom,tcsr-ipq8064
@@ -27,6 +31,7 @@ properties:
               - qcom,tcsr-msm8953
               - qcom,tcsr-msm8960
               - qcom,tcsr-msm8974
+              - qcom,tcsr-msm8996
           - const: syscon
       - items:
           - const: qcom,tcsr-ipq6018
-- 
2.34.1

[RFT PATCH 02/14] arm64: dts: qcom: msm8996: split TCSR halt regs out of mutex

[Krzysztof Kozlowski]

The TCSR halt regs are next to TCSR mutex, so before converting the TCSR
mutex into device with address space, we need to split the halt regs to
its own syscon device.  This also describes more accurately the devices
and their IO address space.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 742eac4ce9b3..3411ced96db6 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -359,7 +359,7 @@ opp-2150400000 {
 	firmware {
 		scm {
 			compatible = "qcom,scm-msm8996", "qcom,scm";
-			qcom,dload-mode = <&tcsr 0x13000>;
+			qcom,dload-mode = <&tcsr_2 0x13000>;
 		};
 	};
 
@@ -840,10 +840,15 @@ pnoc: interconnect@5c0000 {
 
 		tcsr_mutex_regs: syscon@740000 {
 			compatible = "syscon";
-			reg = <0x00740000 0x40000>;
+			reg = <0x00740000 0x20000>;
 		};
 
-		tcsr: syscon@7a0000 {
+		tcsr_1: sycon@760000 {
+			compatible = "qcom,tcsr-msm8996", "syscon";
+			reg = <0x00760000 0x20000>;
+		};
+
+		tcsr_2: syscon@7a0000 {
 			compatible = "qcom,tcsr-msm8996", "syscon";
 			reg = <0x007a0000 0x18000>;
 		};
@@ -2413,7 +2418,7 @@ mss_pil: remoteproc@2080000 {
 			qcom,smem-states = <&mpss_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
-			qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+			qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x4000>;
 
 			status = "disabled";
 
-- 
2.34.1

[RFT PATCH 03/14] arm64: dts: qcom: msm8996: switch TCSR mutex to MMIO

[Krzysztof Kozlowski]

The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap).  This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:

  qcom/msm8996-xiaomi-natrium.dtb: hwlock: 'reg' is a required property
  qcom/msm8996-xiaomi-natrium.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 3411ced96db6..166374566a49 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -363,12 +363,6 @@ scm {
 		};
 	};
 
-	tcsr_mutex: hwlock {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_regs 0 0x1000>;
-		#hwlock-cells = <1>;
-	};
-
 	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the reg */
@@ -838,9 +832,10 @@ pnoc: interconnect@5c0000 {
 				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 		};
 
-		tcsr_mutex_regs: syscon@740000 {
-			compatible = "syscon";
+		tcsr_mutex: hwlock@740000 {
+			compatible = "qcom,tcsr-mutex";
 			reg = <0x00740000 0x20000>;
+			#hwlock-cells = <1>;
 		};
 
 		tcsr_1: sycon@760000 {
-- 
2.34.1

[RFT PATCH 04/14] arm64: dts: qcom: msm8998: split TCSR halt regs out of mutex

[Krzysztof Kozlowski]

The TCSR halt regs are next to TCSR mutex, so before converting the TCSR
mutex into device with address space, we need to split the halt regs to
its own syscon device.  This also describes more accurately the devices
and their IO address space.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8998.dtsi | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 02d21bff2198..f0806ed103f1 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1049,7 +1049,12 @@ ufsphy_lanes: phy@1da7400 {
 
 		tcsr_mutex_regs: syscon@1f40000 {
 			compatible = "syscon";
-			reg = <0x01f40000 0x40000>;
+			reg = <0x01f40000 0x20000>;
+		};
+
+		tcsr_regs_1: sycon@1f60000 {
+			compatible = "qcom,msm8998-tcsr", "syscon";
+			reg = <0x01f60000 0x20000>;
 		};
 
 		tlmm: pinctrl@3400000 {
@@ -1340,7 +1345,7 @@ remoteproc_mss: remoteproc@4080000 {
 			resets = <&gcc GCC_MSS_RESTART>;
 			reset-names = "mss_restart";
 
-			qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+			qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
 
 			power-domains = <&rpmpd MSM8998_VDDCX>,
 					<&rpmpd MSM8998_VDDMX>;
-- 
2.34.1

[RFT PATCH 05/14] arm64: dts: qcom: msm8998: switch TCSR mutex to MMIO

[Krzysztof Kozlowski]

The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap).  This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:

  qcom/msm8998-asus-novago-tp370ql.dtb: hwlock: 'reg' is a required property
  qcom/msm8998-asus-novago-tp370ql.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8998.dtsi | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index f0806ed103f1..22b2da74d105 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -308,12 +308,6 @@ scm {
 		};
 	};
 
-	tcsr_mutex: hwlock {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_regs 0 0x1000>;
-		#hwlock-cells = <1>;
-	};
-
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -1047,9 +1041,10 @@ ufsphy_lanes: phy@1da7400 {
 			};
 		};
 
-		tcsr_mutex_regs: syscon@1f40000 {
-			compatible = "syscon";
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
 			reg = <0x01f40000 0x20000>;
+			#hwlock-cells = <1>;
 		};
 
 		tcsr_regs_1: sycon@1f60000 {
-- 
2.34.1

[RFT PATCH 06/14] arm64: dts: qcom: sc7180: add missing TCSR syscon compatible

[Krzysztof Kozlowski]

TCSR syscon node should come with dedicated compatible.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index b82c335c25af..49f28cb531f6 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1468,7 +1468,7 @@ tcsr_mutex_regs: syscon@1f40000 {
 		};
 
 		tcsr_regs: syscon@1fc0000 {
-			compatible = "syscon";
+			compatible = "qcom,sc7180-tcsr", "syscon";
 			reg = <0 0x01fc0000 0 0x40000>;
 		};
 
-- 
2.34.1

Re: [RFT PATCH 06/14] arm64: dts: qcom: sc7180: add missing TCSR syscon compatible

[Krzysztof Kozlowski]

On 17/08/2022 15:03, Krzysztof Kozlowski wrote:
> TCSR syscon node should come with dedicated compatible.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index b82c335c25af..49f28cb531f6 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -1468,7 +1468,7 @@ tcsr_mutex_regs: syscon@1f40000 {
>  		};
>  
>  		tcsr_regs: syscon@1fc0000 {
> -			compatible = "syscon";
> +			compatible = "qcom,sc7180-tcsr", "syscon";

Compatible is wrong here. I will send a v2 tomorrow.

Best regards,
Krzysztof

Re: [RFT PATCH 06/14] arm64: dts: qcom: sc7180: add missing TCSR syscon compatible

[Krzysztof Kozlowski]

On 17/08/2022 15:38, Krzysztof Kozlowski wrote:
> On 17/08/2022 15:03, Krzysztof Kozlowski wrote:
>> TCSR syscon node should come with dedicated compatible.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> index b82c335c25af..49f28cb531f6 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> @@ -1468,7 +1468,7 @@ tcsr_mutex_regs: syscon@1f40000 {
>>  		};
>>  
>>  		tcsr_regs: syscon@1fc0000 {
>> -			compatible = "syscon";
>> +			compatible = "qcom,sc7180-tcsr", "syscon";
> 

This one is good, it's my other patch with an issue.


Best regards,
Krzysztof

[RFT PATCH 07/14] arm64: dts: qcom: sc7180: split TCSR halt regs out of mutex

[Krzysztof Kozlowski]

The TCSR halt regs are next to TCSR mutex, so before converting the TCSR
mutex into device with address space, we need to split the halt regs to
its own syscon device.  This also describes more accurately the devices
and their IO address space.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 49f28cb531f6..5d2dd21da79c 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1464,10 +1464,15 @@ ipa: ipa@1e40000 {
 
 		tcsr_mutex_regs: syscon@1f40000 {
 			compatible = "syscon";
-			reg = <0 0x01f40000 0 0x40000>;
+			reg = <0 0x01f40000 0 0x20000>;
 		};
 
-		tcsr_regs: syscon@1fc0000 {
+		tcsr_regs_1: sycon@1f60000 {
+			compatible = "qcom,sc7180-tcsr", "syscon";
+			reg = <0 0x01f60000 0 0x20000>;
+		};
+
+		tcsr_regs_2: syscon@1fc0000 {
 			compatible = "qcom,sc7180-tcsr", "syscon";
 			reg = <0 0x01fc0000 0 0x40000>;
 		};
@@ -1932,8 +1937,8 @@ remoteproc_mpss: remoteproc@4080000 {
 				 <&pdc_reset PDC_MODEM_SYNC_RESET>;
 			reset-names = "mss_restart", "pdc_reset";
 
-			qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
-			qcom,spare-regs = <&tcsr_regs 0xb3e4>;
+			qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
+			qcom,spare-regs = <&tcsr_regs_2 0xb3e4>;
 
 			status = "disabled";
 
-- 
2.34.1

[RFT PATCH 08/14] arm64: dts: qcom: sc7180: switch TCSR mutex to MMIO

[Krzysztof Kozlowski]

The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap).  This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:

  qcom/sc7180-trogdor-wormdingler-rev1-inx.dtb: hwlock: 'reg' is a required property
  qcom/sc7180-trogdor-wormdingler-rev1-inx.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 5d2dd21da79c..e8debb0da411 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -555,12 +555,6 @@ scm {
 		};
 	};
 
-	tcsr_mutex: hwlock {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_regs 0 0x1000>;
-		#hwlock-cells = <1>;
-	};
-
 	smem {
 		compatible = "qcom,smem";
 		memory-region = <&smem_mem>;
@@ -1462,9 +1456,10 @@ ipa: ipa@1e40000 {
 			status = "disabled";
 		};
 
-		tcsr_mutex_regs: syscon@1f40000 {
-			compatible = "syscon";
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
 			reg = <0 0x01f40000 0 0x20000>;
+			#hwlock-cells = <1>;
 		};
 
 		tcsr_regs_1: sycon@1f60000 {
-- 
2.34.1

[RFT PATCH 09/14] arm64: dts: qcom: sc7280: split TCSR halt regs out of mutex

[Krzysztof Kozlowski]

The TCSR halt regs are next to TCSR mutex, so before converting the TCSR
mutex into device with address space, we need to split the halt regs to
its own syscon device.  This also describes more accurately the devices
and their IO address space, and allows to remove incorrect syscon
compatible from TCSR mutex:

  qcom/sc7280-herobrine-crd.dtb: hwlock@1f40000: compatible: ['qcom,tcsr-mutex', 'syscon'] is too long

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 13d7f267b289..89a8e6b9822a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2155,12 +2155,17 @@ ipa: ipa@1e40000 {
 		};
 
 		tcsr_mutex: hwlock@1f40000 {
-			compatible = "qcom,tcsr-mutex", "syscon";
-			reg = <0 0x01f40000 0 0x40000>;
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
 			#hwlock-cells = <1>;
 		};
 
-		tcsr: syscon@1fc0000 {
+		tcsr_1: sycon@1f60000 {
+			compatible = "qcom,sc7280-tcsr", "syscon";
+			reg = <0 0x01f60000 0 0x20000>;
+		};
+
+		tcsr_2: syscon@1fc0000 {
 			compatible = "qcom,sc7280-tcsr", "syscon";
 			reg = <0 0x01fc0000 0 0x30000>;
 		};
@@ -2522,9 +2527,9 @@ remoteproc_mpss: remoteproc@4080000 {
 				 <&pdc_reset PDC_MODEM_SYNC_RESET>;
 			reset-names = "mss_restart", "pdc_reset";
 
-			qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>;
-			qcom,ext-regs = <&tcsr 0x10000 0x10004 &tcsr_mutex 0x26004 0x26008>;
-			qcom,qaccept-regs = <&tcsr_mutex 0x23030 0x23040 0x23020>;
+			qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x8000 0x13000>;
+			qcom,ext-regs = <&tcsr_2 0x10000 0x10004 &tcsr_1 0x6004 0x6008>;
+			qcom,qaccept-regs = <&tcsr_1 0x3030 0x3040 0x3020>;
 
 			status = "disabled";
 
@@ -3259,7 +3264,7 @@ remoteproc_wpss: remoteproc@8a00000 {
 				 <&pdc_reset PDC_WPSS_SYNC_RESET>;
 			reset-names = "restart", "pdc_sync";
 
-			qcom,halt-regs = <&tcsr_mutex 0x37000>;
+			qcom,halt-regs = <&tcsr_1 0x17000>;
 
 			status = "disabled";
 
-- 
2.34.1

[RFT PATCH 10/14] arm64: dts: qcom: sdm845: split TCSR halt regs out of mutex

[Krzysztof Kozlowski]

The TCSR halt regs are next to TCSR mutex, so before converting the TCSR
mutex into device with address space, we need to split the halt regs to
its own syscon device.  This also describes more accurately the devices
and their IO address space.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index f0e286715d1b..21ed14200986 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2590,7 +2590,12 @@ ipa: ipa@1e40000 {
 
 		tcsr_mutex_regs: syscon@1f40000 {
 			compatible = "syscon";
-			reg = <0 0x01f40000 0 0x40000>;
+			reg = <0 0x01f40000 0 0x20000>;
+		};
+
+		tcsr_regs_1: sycon@1f60000 {
+			compatible = "qcom,sdm845-tcsr", "syscon";
+			reg = <0 0x01f60000 0 0x20000>;
 		};
 
 		tlmm: pinctrl@3400000 {
@@ -3207,7 +3212,7 @@ mss_pil: remoteproc@4080000 {
 				 <&pdc_reset PDC_MODEM_SYNC_RESET>;
 			reset-names = "mss_restart", "pdc_reset";
 
-			qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+			qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
 
 			power-domains = <&rpmhpd SDM845_CX>,
 					<&rpmhpd SDM845_MX>,
-- 
2.34.1

[RFT PATCH 11/14] arm64: dts: qcom: sdm845: switch TCSR mutex to MMIO

[Krzysztof Kozlowski]

The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap).  This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:

  qcom/sdm845-shift-axolotl.dtb: hwlock: 'reg' is a required property
  qcom/sdm845-shift-axolotl.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 21ed14200986..bd0ec0664283 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -919,12 +919,6 @@ compute-cb@8 {
 		};
 	};
 
-	tcsr_mutex: hwlock {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_regs 0 0x1000>;
-		#hwlock-cells = <1>;
-	};
-
 	smp2p-cdsp {
 		compatible = "qcom,smp2p";
 		qcom,smem = <94>, <432>;
@@ -2588,9 +2582,10 @@ ipa: ipa@1e40000 {
 			status = "disabled";
 		};
 
-		tcsr_mutex_regs: syscon@1f40000 {
-			compatible = "syscon";
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
 			reg = <0 0x01f40000 0 0x20000>;
+			#hwlock-cells = <1>;
 		};
 
 		tcsr_regs_1: sycon@1f60000 {
-- 
2.34.1

[RFT PATCH 12/14] arm64: dts: qcom: qcs404: switch TCSR mutex to MMIO

[Krzysztof Kozlowski]

The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap).  This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:

  qcom/qcs404-evb-4000.dtb: hwlock: 'reg' is a required property
  qcom/qcs404-evb-4000.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcs404.dtsi | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 9ab990061522..3a94eb2cc448 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -295,12 +295,6 @@ smem {
 		hwlocks = <&tcsr_mutex 3>;
 	};
 
-	tcsr_mutex: hwlock {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_regs 0 0x1000>;
-		#hwlock-cells = <1>;
-	};
-
 	soc: soc@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -726,9 +720,10 @@ gcc: clock-controller@1800000 {
 			assigned-clock-rates = <19200000>;
 		};
 
-		tcsr_mutex_regs: syscon@1905000 {
-			compatible = "syscon";
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
 			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
 		};
 
 		tcsr: syscon@1937000 {
-- 
2.34.1

[RFT PATCH 13/14] arm64: dts: qcom: sdm630: switch TCSR mutex to MMIO

[Krzysztof Kozlowski]

The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap).  This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:

  qcom/sdm636-sony-xperia-ganges-mermaid.dtb: hwlock: 'reg' is a required property
  qcom/sdm636-sony-xperia-ganges-mermaid.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm630.dtsi | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 1bc9091cad2a..40a40d00eae4 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -697,9 +697,10 @@ tsens: thermal-sensor@10ae000 {
 			#thermal-sensor-cells = <1>;
 		};
 
-		tcsr_mutex_regs: syscon@1f40000 {
-			compatible = "syscon";
-			reg = <0x01f40000 0x40000>;
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01f40000 0x20000>;
+			#hwlock-cells = <1>;
 		};
 
 		tlmm: pinctrl@3100000 {
@@ -2351,12 +2352,6 @@ intc: interrupt-controller@17a00000 {
 		};
 	};
 
-	tcsr_mutex: hwlock {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_regs 0 0x1000>;
-		#hwlock-cells = <1>;
-	};
-
 	sound: sound {
 	};
 
-- 
2.34.1

[RFT PATCH 14/14] arm64: dts: qcom: sm8150: switch TCSR mutex to MMIO

[Krzysztof Kozlowski]

The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap).  This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:

  qcom/sm8150-mtp.dtb: hwlock: 'reg' is a required property
  qcom/sm8150-mtp.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 7d509ecd44da..dc6770391813 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -585,12 +585,6 @@ scm: scm {
 		};
 	};
 
-	tcsr_mutex: hwlock {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_regs 0 0x1000>;
-		#hwlock-cells = <1>;
-	};
-
 	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -2054,9 +2048,10 @@ ipa_virt: interconnect@1e00000 {
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		tcsr_mutex_regs: syscon@1f40000 {
-			compatible = "syscon";
-			reg = <0x0 0x01f40000 0x0 0x40000>;
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+			#hwlock-cells = <1>;
 		};
 
 		remoteproc_slpi: remoteproc@2400000 {
-- 
2.34.1