[PATCH v5 0/2] coresight: catu: Introduce refcount and spinlock for enabling/disabling

[PATCH v5 0/2] coresight: catu: Introduce refcount and spinlock for enabling/disabling

[Yabin Cui]

Hi Coresight maintainers,

When tracing ETM data on multiple CPUs concurrently via the
perf interface, the CATU device is shared across different CPU
paths. This can lead to race conditions when multiple CPUs attempt
to enable or disable the CATU device simultaneously. This patchset
is to fix race conditions when enabling/disabling a CATU device.

Changes since v4:
 - Collect Review-by tags.
 - return -EINVAL for unknown types in coresight_enable_path.

Changes since v3:
 - Add newlines between variable definition and guard().
 - Add path parameter when calling coresight_disable_helpers.
 - Use "goto err_disable_helpers" in coresight_enable_path().

Changes since v2:
- In catu_disable(), return 0 when refcnt > 0.
- Remove the patch checking enabled mode.
- Disable helpers at the places where a coresight device fails to
  enable.

Changes since v1:
- Use raw_spinlock_t and guard().
- Add a patch to check enabled mode.
- Add a patch to disable helpers when fails to enable a device.

Yabin Cui (2):
  coresight: catu: Introduce refcount and spinlock for
    enabling/disabling
  coresight: core: Disable helpers for devices that fail to enable

 drivers/hwtracing/coresight/coresight-catu.c | 25 +++++++++++++-------
 drivers/hwtracing/coresight/coresight-catu.h |  1 +
 drivers/hwtracing/coresight/coresight-core.c | 11 ++++++---
 3 files changed, 26 insertions(+), 11 deletions(-)

-- 
2.49.0.967.g6a0df3ecc3-goog

[PATCH v5 1/2] coresight: catu: Introduce refcount and spinlock for enabling/disabling

[Yabin Cui]

When tracing ETM data on multiple CPUs concurrently via the
perf interface, the CATU device is shared across different CPU
paths. This can lead to race conditions when multiple CPUs attempt
to enable or disable the CATU device simultaneously.

To address these race conditions, this patch introduces the
following changes:

1. The enable and disable operations for the CATU device are not
   reentrant. Therefore, a spinlock is added to ensure that only
   one CPU can enable or disable a given CATU device at any point
   in time.

2. A reference counter is used to manage the enable/disable state
   of the CATU device. The device is enabled when the first CPU
   requires it and is only disabled when the last CPU finishes
   using it. This ensures the device remains active as long as at
   least one CPU needs it.

Signed-off-by: Yabin Cui <yabinc@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
---
 drivers/hwtracing/coresight/coresight-catu.c | 25 +++++++++++++-------
 drivers/hwtracing/coresight/coresight-catu.h |  1 +
 2 files changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-catu.c b/drivers/hwtracing/coresight/coresight-catu.c
index 96cb48b140af..d4e2e175e077 100644
--- a/drivers/hwtracing/coresight/coresight-catu.c
+++ b/drivers/hwtracing/coresight/coresight-catu.c
@@ -458,12 +458,17 @@ static int catu_enable_hw(struct catu_drvdata *drvdata, enum cs_mode cs_mode,
 static int catu_enable(struct coresight_device *csdev, enum cs_mode mode,
 		       void *data)
 {
-	int rc;
+	int rc = 0;
 	struct catu_drvdata *catu_drvdata = csdev_to_catu_drvdata(csdev);
 
-	CS_UNLOCK(catu_drvdata->base);
-	rc = catu_enable_hw(catu_drvdata, mode, data);
-	CS_LOCK(catu_drvdata->base);
+	guard(raw_spinlock_irqsave)(&catu_drvdata->spinlock);
+	if (csdev->refcnt == 0) {
+		CS_UNLOCK(catu_drvdata->base);
+		rc = catu_enable_hw(catu_drvdata, mode, data);
+		CS_LOCK(catu_drvdata->base);
+	}
+	if (!rc)
+		csdev->refcnt++;
 	return rc;
 }
 
@@ -486,12 +491,15 @@ static int catu_disable_hw(struct catu_drvdata *drvdata)
 
 static int catu_disable(struct coresight_device *csdev, void *__unused)
 {
-	int rc;
+	int rc = 0;
 	struct catu_drvdata *catu_drvdata = csdev_to_catu_drvdata(csdev);
 
-	CS_UNLOCK(catu_drvdata->base);
-	rc = catu_disable_hw(catu_drvdata);
-	CS_LOCK(catu_drvdata->base);
+	guard(raw_spinlock_irqsave)(&catu_drvdata->spinlock);
+	if (--csdev->refcnt == 0) {
+		CS_UNLOCK(catu_drvdata->base);
+		rc = catu_disable_hw(catu_drvdata);
+		CS_LOCK(catu_drvdata->base);
+	}
 	return rc;
 }
 
@@ -550,6 +558,7 @@ static int __catu_probe(struct device *dev, struct resource *res)
 	dev->platform_data = pdata;
 
 	drvdata->base = base;
+	raw_spin_lock_init(&drvdata->spinlock);
 	catu_desc.access = CSDEV_ACCESS_IOMEM(base);
 	catu_desc.pdata = pdata;
 	catu_desc.dev = dev;
diff --git a/drivers/hwtracing/coresight/coresight-catu.h b/drivers/hwtracing/coresight/coresight-catu.h
index 141feac1c14b..755776cd19c5 100644
--- a/drivers/hwtracing/coresight/coresight-catu.h
+++ b/drivers/hwtracing/coresight/coresight-catu.h
@@ -65,6 +65,7 @@ struct catu_drvdata {
 	void __iomem *base;
 	struct coresight_device *csdev;
 	int irq;
+	raw_spinlock_t spinlock;
 };
 
 #define CATU_REG32(name, offset)					\
-- 
2.49.0.967.g6a0df3ecc3-goog

Re: [PATCH v5 1/2] coresight: catu: Introduce refcount and spinlock for enabling/disabling

[Suzuki K Poulose]

On 30/04/2025 00:12, Yabin Cui wrote:
> When tracing ETM data on multiple CPUs concurrently via the
> perf interface, the CATU device is shared across different CPU
> paths. This can lead to race conditions when multiple CPUs attempt
> to enable or disable the CATU device simultaneously.
> 
> To address these race conditions, this patch introduces the
> following changes:
> 
> 1. The enable and disable operations for the CATU device are not
>     reentrant. Therefore, a spinlock is added to ensure that only
>     one CPU can enable or disable a given CATU device at any point
>     in time.
> 
> 2. A reference counter is used to manage the enable/disable state
>     of the CATU device. The device is enabled when the first CPU
>     requires it and is only disabled when the last CPU finishes
>     using it. This ensures the device remains active as long as at
>     least one CPU needs it.
> 
> Signed-off-by: Yabin Cui <yabinc@google.com>
> Reviewed-by: James Clark <james.clark@linaro.org>
> Reviewed-by: Leo Yan <leo.yan@arm.com>

Looks good to me, I will add :

Fixes: fcacb5c154ba ("coresight: Introduce support for Coresight Address 
Translation Unit")

Suzuki

> ---
>   drivers/hwtracing/coresight/coresight-catu.c | 25 +++++++++++++-------
>   drivers/hwtracing/coresight/coresight-catu.h |  1 +
>   2 files changed, 18 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/hwtracing/coresight/coresight-catu.c b/drivers/hwtracing/coresight/coresight-catu.c
> index 96cb48b140af..d4e2e175e077 100644
> --- a/drivers/hwtracing/coresight/coresight-catu.c
> +++ b/drivers/hwtracing/coresight/coresight-catu.c
> @@ -458,12 +458,17 @@ static int catu_enable_hw(struct catu_drvdata *drvdata, enum cs_mode cs_mode,
>   static int catu_enable(struct coresight_device *csdev, enum cs_mode mode,
>   		       void *data)
>   {
> -	int rc;
> +	int rc = 0;
>   	struct catu_drvdata *catu_drvdata = csdev_to_catu_drvdata(csdev);
>   
> -	CS_UNLOCK(catu_drvdata->base);
> -	rc = catu_enable_hw(catu_drvdata, mode, data);
> -	CS_LOCK(catu_drvdata->base);
> +	guard(raw_spinlock_irqsave)(&catu_drvdata->spinlock);
> +	if (csdev->refcnt == 0) {
> +		CS_UNLOCK(catu_drvdata->base);
> +		rc = catu_enable_hw(catu_drvdata, mode, data);
> +		CS_LOCK(catu_drvdata->base);
> +	}
> +	if (!rc)
> +		csdev->refcnt++;
>   	return rc;
>   }
>   
> @@ -486,12 +491,15 @@ static int catu_disable_hw(struct catu_drvdata *drvdata)
>   
>   static int catu_disable(struct coresight_device *csdev, void *__unused)
>   {
> -	int rc;
> +	int rc = 0;
>   	struct catu_drvdata *catu_drvdata = csdev_to_catu_drvdata(csdev);
>   
> -	CS_UNLOCK(catu_drvdata->base);
> -	rc = catu_disable_hw(catu_drvdata);
> -	CS_LOCK(catu_drvdata->base);
> +	guard(raw_spinlock_irqsave)(&catu_drvdata->spinlock);
> +	if (--csdev->refcnt == 0) {
> +		CS_UNLOCK(catu_drvdata->base);
> +		rc = catu_disable_hw(catu_drvdata);
> +		CS_LOCK(catu_drvdata->base);
> +	}
>   	return rc;
>   }
>   
> @@ -550,6 +558,7 @@ static int __catu_probe(struct device *dev, struct resource *res)
>   	dev->platform_data = pdata;
>   
>   	drvdata->base = base;
> +	raw_spin_lock_init(&drvdata->spinlock);
>   	catu_desc.access = CSDEV_ACCESS_IOMEM(base);
>   	catu_desc.pdata = pdata;
>   	catu_desc.dev = dev;
> diff --git a/drivers/hwtracing/coresight/coresight-catu.h b/drivers/hwtracing/coresight/coresight-catu.h
> index 141feac1c14b..755776cd19c5 100644
> --- a/drivers/hwtracing/coresight/coresight-catu.h
> +++ b/drivers/hwtracing/coresight/coresight-catu.h
> @@ -65,6 +65,7 @@ struct catu_drvdata {
>   	void __iomem *base;
>   	struct coresight_device *csdev;
>   	int irq;
> +	raw_spinlock_t spinlock;
>   };
>   
>   #define CATU_REG32(name, offset)					\

[PATCH v5 2/2] coresight: core: Disable helpers for devices that fail to enable

[Yabin Cui]

When enabling a SINK or LINK type coresight device fails, the
associated helpers should be disabled.

Signed-off-by: Yabin Cui <yabinc@google.com>
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
---
 drivers/hwtracing/coresight/coresight-core.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c
index dabec7073aed..d3523f0262af 100644
--- a/drivers/hwtracing/coresight/coresight-core.c
+++ b/drivers/hwtracing/coresight/coresight-core.c
@@ -465,7 +465,7 @@ int coresight_enable_path(struct coresight_path *path, enum cs_mode mode,
 		/* Enable all helpers adjacent to the path first */
 		ret = coresight_enable_helpers(csdev, mode, path);
 		if (ret)
-			goto err;
+			goto err_disable_path;
 		/*
 		 * ETF devices are tricky... They can be a link or a sink,
 		 * depending on how they are configured.  If an ETF has been
@@ -486,8 +486,10 @@ int coresight_enable_path(struct coresight_path *path, enum cs_mode mode,
 			 * that need disabling. Disabling the path here
 			 * would mean we could disrupt an existing session.
 			 */
-			if (ret)
+			if (ret) {
+				coresight_disable_helpers(csdev, path);
 				goto out;
+			}
 			break;
 		case CORESIGHT_DEV_TYPE_SOURCE:
 			/* sources are enabled from either sysFS or Perf */
@@ -497,16 +499,19 @@ int coresight_enable_path(struct coresight_path *path, enum cs_mode mode,
 			child = list_next_entry(nd, link)->csdev;
 			ret = coresight_enable_link(csdev, parent, child, source);
 			if (ret)
-				goto err;
+				goto err_disable_helpers;
 			break;
 		default:
-			goto err;
+			ret = -EINVAL;
+			goto err_disable_helpers;
 		}
 	}
 
 out:
 	return ret;
-err:
+err_disable_helpers:
+	coresight_disable_helpers(csdev, path);
+err_disable_path:
 	coresight_disable_path_from(path, nd);
 	goto out;
 }
-- 
2.49.0.967.g6a0df3ecc3-goog

Re: [PATCH v5 2/2] coresight: core: Disable helpers for devices that fail to enable

[Leo Yan]

On Tue, Apr 29, 2025 at 04:13:00PM -0700, Yabin Cui wrote:
> When enabling a SINK or LINK type coresight device fails, the
> associated helpers should be disabled.
> 
> Signed-off-by: Yabin Cui <yabinc@google.com>
> Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
> Reviewed-by: James Clark <james.clark@linaro.org>
> Reviewed-by: Mike Leach <mike.leach@linaro.org>

Reviewed-by: Leo Yan <leo.yan@arm.com>

> ---
>  drivers/hwtracing/coresight/coresight-core.c | 15 ++++++++++-----
>  1 file changed, 10 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c
> index dabec7073aed..d3523f0262af 100644
> --- a/drivers/hwtracing/coresight/coresight-core.c
> +++ b/drivers/hwtracing/coresight/coresight-core.c
> @@ -465,7 +465,7 @@ int coresight_enable_path(struct coresight_path *path, enum cs_mode mode,
>  		/* Enable all helpers adjacent to the path first */
>  		ret = coresight_enable_helpers(csdev, mode, path);
>  		if (ret)
> -			goto err;
> +			goto err_disable_path;
>  		/*
>  		 * ETF devices are tricky... They can be a link or a sink,
>  		 * depending on how they are configured.  If an ETF has been
> @@ -486,8 +486,10 @@ int coresight_enable_path(struct coresight_path *path, enum cs_mode mode,
>  			 * that need disabling. Disabling the path here
>  			 * would mean we could disrupt an existing session.
>  			 */
> -			if (ret)
> +			if (ret) {
> +				coresight_disable_helpers(csdev, path);
>  				goto out;
> +			}
>  			break;
>  		case CORESIGHT_DEV_TYPE_SOURCE:
>  			/* sources are enabled from either sysFS or Perf */
> @@ -497,16 +499,19 @@ int coresight_enable_path(struct coresight_path *path, enum cs_mode mode,
>  			child = list_next_entry(nd, link)->csdev;
>  			ret = coresight_enable_link(csdev, parent, child, source);
>  			if (ret)
> -				goto err;
> +				goto err_disable_helpers;
>  			break;
>  		default:
> -			goto err;
> +			ret = -EINVAL;
> +			goto err_disable_helpers;
>  		}
>  	}
>  
>  out:
>  	return ret;
> -err:
> +err_disable_helpers:
> +	coresight_disable_helpers(csdev, path);
> +err_disable_path:
>  	coresight_disable_path_from(path, nd);
>  	goto out;
>  }
> -- 
> 2.49.0.967.g6a0df3ecc3-goog
> 

Re: [PATCH v5 2/2] coresight: core: Disable helpers for devices that fail to enable

[Suzuki K Poulose]

On 30/04/2025 00:13, Yabin Cui wrote:
> When enabling a SINK or LINK type coresight device fails, the
> associated helpers should be disabled.
> 
> Signed-off-by: Yabin Cui <yabinc@google.com>
> Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
> Reviewed-by: James Clark <james.clark@linaro.org>
> Reviewed-by: Mike Leach <mike.leach@linaro.org>

Again, this should have :

Fixes: 6148652807ba ("coresight: Enable and disable helper devices 
adjacent to the path")

I have added it locally

Rest looks good to me


Suzuki


> ---
>   drivers/hwtracing/coresight/coresight-core.c | 15 ++++++++++-----
>   1 file changed, 10 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c
> index dabec7073aed..d3523f0262af 100644
> --- a/drivers/hwtracing/coresight/coresight-core.c
> +++ b/drivers/hwtracing/coresight/coresight-core.c
> @@ -465,7 +465,7 @@ int coresight_enable_path(struct coresight_path *path, enum cs_mode mode,
>   		/* Enable all helpers adjacent to the path first */
>   		ret = coresight_enable_helpers(csdev, mode, path);
>   		if (ret)
> -			goto err;
> +			goto err_disable_path;
>   		/*
>   		 * ETF devices are tricky... They can be a link or a sink,
>   		 * depending on how they are configured.  If an ETF has been
> @@ -486,8 +486,10 @@ int coresight_enable_path(struct coresight_path *path, enum cs_mode mode,
>   			 * that need disabling. Disabling the path here
>   			 * would mean we could disrupt an existing session.
>   			 */
> -			if (ret)
> +			if (ret) {
> +				coresight_disable_helpers(csdev, path);
>   				goto out;
> +			}
>   			break;
>   		case CORESIGHT_DEV_TYPE_SOURCE:
>   			/* sources are enabled from either sysFS or Perf */
> @@ -497,16 +499,19 @@ int coresight_enable_path(struct coresight_path *path, enum cs_mode mode,
>   			child = list_next_entry(nd, link)->csdev;
>   			ret = coresight_enable_link(csdev, parent, child, source);
>   			if (ret)
> -				goto err;
> +				goto err_disable_helpers;
>   			break;
>   		default:
> -			goto err;
> +			ret = -EINVAL;
> +			goto err_disable_helpers;
>   		}
>   	}
>   
>   out:
>   	return ret;
> -err:
> +err_disable_helpers:
> +	coresight_disable_helpers(csdev, path);
> +err_disable_path:
>   	coresight_disable_path_from(path, nd);
>   	goto out;
>   }

Re: [PATCH v5 0/2] coresight: catu: Introduce refcount and spinlock for enabling/disabling

[Suzuki K Poulose]

On Tue, 29 Apr 2025 16:12:58 -0700, Yabin Cui wrote:
> When tracing ETM data on multiple CPUs concurrently via the
> perf interface, the CATU device is shared across different CPU
> paths. This can lead to race conditions when multiple CPUs attempt
> to enable or disable the CATU device simultaneously. This patchset
> is to fix race conditions when enabling/disabling a CATU device.
> 
> Changes since v4:
>  - Collect Review-by tags.
>  - return -EINVAL for unknown types in coresight_enable_path.
> 
> [...]

Applied, thanks!

[1/2] coresight: catu: Introduce refcount and spinlock for enabling/disabling
      https://git.kernel.org/coresight/c/a03a0a08
[2/2] coresight: core: Disable helpers for devices that fail to enable
      https://git.kernel.org/coresight/c/f6028eee

Best regards,
-- 
Suzuki K Poulose <suzuki.poulose@arm.com>