Re: [PATCH 3/5] spi: spi-qpic: Add qpic spi nand driver support

[Md Sadre Alam <quic_mdalam@quicinc.com>]

On 2/15/2024 11:27 PM, Konrad Dybcio wrote:
> On 15.02.2024 14:48, Md Sadre Alam wrote:
>> Add qpic spi nand driver support. The spi nand
>> driver currently supported the below commands.
>>
>> -- RESET
>> -- READ ID
>> -- SET FEATURE
>> -- GET FEATURE
>> -- READ PAGE
>> -- WRITE PAGE
>> -- ERASE PAGE
>>
>> Co-developed-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
>> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
>> Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
>> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
>> Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
>> ---
> 
> [...]
> 
>> +void snandc_set_reg(struct qcom_nand_controller *snandc, int offset, u32 val)
>> +{
>> +	struct nandc_regs *regs = snandc->regs;
>> +	__le32 *reg;
>> +
>> +	reg = offset_to_nandc_reg(regs, offset);
>> +
>> +	if (reg)
>> +		*reg = cpu_to_le32(val);
> 
> if (WARN_ON(!reg))
> 	return;
> 
> instead?
> 
> This would be tragic..

  will fix this in next patch.

> 
> [...]
> 
>> +
>> +	ecc_cfg->cfg0 = (cwperpage - 1) << CW_PER_PAGE
>> +				| ecc_cfg->cw_data << UD_SIZE_BYTES
>> +				| 1 << DISABLE_STATUS_AFTER_WRITE
>> +				| 3 << NUM_ADDR_CYCLES
>> +				| ecc_cfg->ecc_bytes_hw << ECC_PARITY_SIZE_BYTES_RS
>> +				| 0 << STATUS_BFR_READ
>> +				| 1 << SET_RD_MODE_AFTER_STATUS
>> +				| ecc_cfg->spare_bytes << SPARE_SIZE_BYTES;
> 
> Let me introduce you to FIELD_PREP/GET and GENMASK().. Many assignments
> in this file could use these.

  Ok
> 
> Konrad

Thanks for reviewing, will fix all the comments in next patch.

Regards,
Alam.