From: ebiederm@xmission.com (Eric W. Biederman)
To: vgoyal@in.ibm.com
Cc: fastboot@osdl.org, Horms <horms@verge.net.au>,
Jan Kratochvil <lace@jankratochvil.net>,
"H. Peter Anvin" <hpa@zytor.com>,
Magnus Damm <magnus.damm@gmail.com>,
linux-kernel@vger.kernel.org
Subject: Re: [Fastboot] [CFT] ELF Relocatable x86 and x86_64 bzImages
Date: Mon, 31 Jul 2006 20:31:43 -0600 [thread overview]
Message-ID: <m18xm9425s.fsf@ebiederm.dsl.xmission.com> (raw)
In-Reply-To: <20060731210050.GC11790@in.ibm.com> (Vivek Goyal's message of "Mon, 31 Jul 2006 17:00:50 -0400")
Vivek Goyal <vgoyal@in.ibm.com> writes:
> On Mon, Jul 31, 2006 at 04:25:20PM -0400, Vivek Goyal wrote:
>> On Mon, Jul 31, 2006 at 10:19:04AM -0600, Eric W. Biederman wrote:
>> >
>> > I have spent some time and have gotten my relocatable kernel patches
>> > working against the latest kernels. I intend to push this upstream
>> > shortly.
>> >
>> > Could all of the people who care take a look and test this out
>> > to make certain that it doesn't just work on my test box?
>> >
>> Hi Eric,
>>
>> Currently I am testing your patches on i386. With CONFIG_RELOCATABLE=y
>> kernel boots fine and kexec also works.
>>
>> But my kernel hangs on kexec on panic case. It hangs early in
>> decompress_kernel(). Kernel hangs at following condition.
>>
>> + if (((u32)output - CONFIG_PHYSICAL_START) & 0x3fffff)
>> + error("Destination address not 4M aligned");
>>
As for the missing print. Did you have an appropriate earlyprintk?
> Ok. I am decompressing the kernel to 16MB and after reducing 1MB of
> CONFIG_PHYSICAL_START I am left with 15MB which is not 4M aligned
> hence I seems to be running into it.
>
> I changed it to
>
> if ((u32)output) & 0x3fffff)
>
> and kdump kernel booted fine. But this will run into issues if I load
> kernel at 1MB.
>
> I got a dump question. Why do I have to load the kernel at 4MB alignment?
> Existing kernel boots loads at 1MB, which is non 4MB aligned and it works
> fine?
4MB is a little harsh, but I haven't worked through what the exact rules
are, I know 4MB is the worst case alignment for arch/i386.
The rule is that we have to be at the same offset from 4MB as we
were built to run at. So in this case address where (address %4MB) == 1MB.
We might be able to get away with 2MB alignment. I thought kexec-tools
did that calculation automatically for an ET_DYN image but it has been
a while since I looked.
My goal with the check was to catch problems early before something
bad happened.
Eric
next prev parent reply other threads:[~2006-08-01 2:33 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <aec7e5c30606300145p441d8d0xd89fab5e87de5a22@mail.gmail.com>
[not found] ` <20060705222448.GC992@in.ibm.com>
[not found] ` <aec7e5c30607051932r49bbcc7eh2c190daa06859dcc@mail.gmail.com>
[not found] ` <20060706081520.GB28225@host0.dyn.jankratochvil.net>
[not found] ` <aec7e5c30607070147g657d2624qa93a145dd4515484@mail.gmail.com>
[not found] ` <20060707133518.GA15810@in.ibm.com>
[not found] ` <20060707143519.GB13097@host0.dyn.jankratochvil.net>
[not found] ` <20060710233219.GF16215@in.ibm.com>
[not found] ` <20060711010815.GB1021@host0.dyn.jankratochvil.net>
[not found] ` <m1d5c92yv4.fsf@ebiederm.dsl.xmission.com>
2006-07-31 16:19 ` Eric W. Biederman
2006-07-31 20:25 ` Vivek Goyal
2006-07-31 21:00 ` [Fastboot] " Vivek Goyal
2006-08-01 2:31 ` Eric W. Biederman [this message]
2006-08-01 2:34 ` H. Peter Anvin
2006-08-01 3:44 ` Eric W. Biederman
2006-08-01 4:25 ` Jan Kratochvil
2006-08-01 9:09 ` Eric W. Biederman
2006-08-01 9:43 ` Jan Kratochvil
2006-08-01 11:28 ` Eric W. Biederman
2006-08-04 21:08 ` Don Zickus
2006-08-04 21:25 ` Eric W. Biederman
2006-08-04 23:43 ` Don Zickus
2006-08-05 7:49 ` Eric W. Biederman
2006-08-05 16:07 ` Eric W. Biederman
2006-08-07 17:44 ` Don Zickus
2006-08-07 18:08 ` Eric W. Biederman
2006-08-07 23:57 ` Don Zickus
2006-08-08 5:01 ` Eric W. Biederman
2006-08-08 19:36 ` Don Zickus
2006-08-09 20:06 ` Don Zickus
2006-08-10 6:09 ` Eric W. Biederman
2006-08-10 13:13 ` Vivek Goyal
2006-08-10 17:05 ` Eric W. Biederman
2006-08-10 18:18 ` Vivek Goyal
2006-08-10 20:09 ` Eric W. Biederman
2006-08-11 21:25 ` Don Zickus
2006-08-12 7:20 ` Eric W. Biederman
2006-08-12 15:25 ` Don Zickus
2006-08-12 19:41 ` Eric W. Biederman
2006-08-13 20:06 ` Andi Kleen
2006-08-13 21:44 ` Eric W. Biederman
2006-08-14 16:51 ` [Fastboot] " Vivek Goyal
2006-08-14 17:04 ` H. Peter Anvin
2006-08-14 18:11 ` Vivek Goyal
2006-08-14 19:32 ` H. Peter Anvin
2006-08-14 19:42 ` Vivek Goyal
2006-08-14 19:45 ` H. Peter Anvin
2006-08-14 19:57 ` Vivek Goyal
2006-08-14 20:10 ` Eric W. Biederman
2006-08-14 20:59 ` Vivek Goyal
2006-08-14 21:15 ` Eric W. Biederman
2006-08-14 20:00 ` Eric W. Biederman
2006-08-08 23:36 ` Andi Kleen
2006-08-25 20:16 ` Vivek Goyal
[not found] <6EIOG-2xY-31@gated-at.bofh.it>
[not found] ` <6EIOG-2xY-33@gated-at.bofh.it>
[not found] ` <6EIOG-2xY-35@gated-at.bofh.it>
[not found] ` <6EIOG-2xY-37@gated-at.bofh.it>
[not found] ` <6EIOG-2xY-39@gated-at.bofh.it>
[not found] ` <6EIOG-2xY-19@gated-at.bofh.it>
[not found] ` <6Gf5M-2zt-23@gated-at.bofh.it>
[not found] ` <6Gfpt-30C-49@gated-at.bofh.it>
[not found] ` <6GhAA-6bP-19@gated-at.bofh.it>
[not found] ` <6Gx2C-436-5@gated-at.bofh.it>
[not found] ` <6HhoT-5E7-33@gated-at.bofh.it>
[not found] ` <6HhRQ-6uk-3@gated-at.bofh.it>
2006-08-09 12:40 ` [Fastboot] " Bodo Eggert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m18xm9425s.fsf@ebiederm.dsl.xmission.com \
--to=ebiederm@xmission.com \
--cc=fastboot@osdl.org \
--cc=horms@verge.net.au \
--cc=hpa@zytor.com \
--cc=lace@jankratochvil.net \
--cc=linux-kernel@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=vgoyal@in.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®