mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: tip-bot for Baoquan He <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: mingo@kernel.org, ebiederm@xmission.com, bhe@redhat.com,
	tglx@linutronix.de, linux-kernel@vger.kernel.org, hpa@zytor.com,
	torvalds@linux-foundation.org, peterz@infradead.org
Subject: [tip:x86/apic] x86/apic: Fix restoring boot IRQ mode in reboot and kexec/kdump
Date: Sat, 17 Feb 2018 03:42:10 -0800	[thread overview]
Message-ID: <tip-339b2ae0cd5d4a58f9efe06e4ee36adbeca59228@git.kernel.org> (raw)
In-Reply-To: <20180214054656.3780-4-bhe@redhat.com>

Commit-ID:  339b2ae0cd5d4a58f9efe06e4ee36adbeca59228
Gitweb:     https://git.kernel.org/tip/339b2ae0cd5d4a58f9efe06e4ee36adbeca59228
Author:     Baoquan He <bhe@redhat.com>
AuthorDate: Wed, 14 Feb 2018 13:46:53 +0800
Committer:  Ingo Molnar <mingo@kernel.org>
CommitDate: Sat, 17 Feb 2018 11:47:45 +0100

x86/apic: Fix restoring boot IRQ mode in reboot and kexec/kdump

This is a regression fix.

Before, to fix erratum AVR31, the following commit:

  522e66464467 ("x86/apic: Disable I/O APIC before shutdown of the local APIC")

... moved the lapic_shutdown() call to after disable_IO_APIC() in the reboot
and kexec/kdump code paths.

This introduced the following regression: disable_IO_APIC() not only clears
the IO-APIC, but it also restores boot IRQ mode by setting the
LAPIC/APIC/IMCR, calling lapic_shutdown() after disable_IO_APIC() will
disable LAPIC and ruin the possible virtual wire mode setting which
the code has been trying to do all along.

The consequence is that a KVM guest kernel always prints the warning below
during kexec/kdump as the kernel boots up:

  [    0.001000] WARNING: CPU: 0 PID: 0 at arch/x86/kernel/apic/apic.c:1467 setup_local_APIC+0x228/0x330
  [    ........]
  [    0.001000] Call Trace:
  [    0.001000]  apic_bsp_setup+0x56/0x74
  [    0.001000]  x86_late_time_init+0x11/0x16
  [    0.001000]  start_kernel+0x3c9/0x486
  [    0.001000]  secondary_startup_64+0xa5/0xb0
  [    ........]
  [    0.001000] masked ExtINT on CPU#0

To fix this, just call clear_IO_APIC() to stop the IO-APIC where
disable_IO_APIC() was called, and call restore_boot_irq_mode() to
restore boot IRQ mode before a reboot or a kexec/kdump jump.

Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: douly.fnst@cn.fujitsu.com
Cc: joro@8bytes.org
Cc: prarit@redhat.com
Cc: stable@vger.kernel.org
Cc: uobergfe@redhat.com
Fixes: commit 522e66464467 ("x86/apic: Disable I/O APIC before shutdown of the local APIC")
Link: http://lkml.kernel.org/r/20180214054656.3780-4-bhe@redhat.com
[ Rewrote the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/kernel/crash.c  | 3 ++-
 arch/x86/kernel/reboot.c | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index 10e74d4..1f66804 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -199,9 +199,10 @@ void native_machine_crash_shutdown(struct pt_regs *regs)
 #ifdef CONFIG_X86_IO_APIC
 	/* Prevent crash_kexec() from deadlocking on ioapic_lock. */
 	ioapic_zap_locks();
-	disable_IO_APIC();
+	clear_IO_APIC();
 #endif
 	lapic_shutdown();
+	restore_boot_irq_mode();
 #ifdef CONFIG_HPET_TIMER
 	hpet_disable();
 #endif
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 2126b9d..725624b 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -666,7 +666,7 @@ void native_machine_shutdown(void)
 	 * Even without the erratum, it still makes sense to quiet IO APIC
 	 * before disabling Local APIC.
 	 */
-	disable_IO_APIC();
+	clear_IO_APIC();
 #endif
 
 #ifdef CONFIG_SMP
@@ -680,6 +680,7 @@ void native_machine_shutdown(void)
 #endif
 
 	lapic_shutdown();
+	restore_boot_irq_mode();
 
 #ifdef CONFIG_HPET_TIMER
 	hpet_disable();

  reply	other threads:[~2018-02-17 11:42 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-14  5:46 [PATCH v5 0/6] x86/apic: Fix restoring boot irq " Baoquan He
2018-02-14  5:46 ` [PATCH v5 1/6] x86/apic: Split out restore_boot_irq_mode from disable_IO_APIC Baoquan He
2018-02-17 11:41   ` [tip:x86/apic] x86/apic: Split out restore_boot_irq_mode() from disable_IO_APIC() tip-bot for Baoquan He
2018-02-14  5:46 ` [PATCH v5 2/6] x86/apic: Replace disable_IO_APIC for KEXEC_JUMP Baoquan He
2018-02-17 11:41   ` [tip:x86/apic] x86/apic: Split disable_IO_APIC() into two functions to fix CONFIG_KEXEC_JUMP=y tip-bot for Baoquan He
2018-02-14  5:46 ` [PATCH v5 3/6] x86/apic: Fix restoring boot irq mode in reboot and kexec/kdump Baoquan He
2018-02-17 11:42   ` tip-bot for Baoquan He [this message]
2018-02-14  5:46 ` [PATCH v5 4/6] x86/apic: Remove useless disable_IO_APIC Baoquan He
2018-02-17 11:42   ` [tip:x86/apic] x86/apic: Remove the (now) unused disable_IO_APIC() function tip-bot for Baoquan He
2018-02-14  5:46 ` [PATCH v5 5/6] x86/apic: Rename variable/function related to x86_io_apic_ops Baoquan He
2018-02-17 11:43   ` [tip:x86/apic] x86/apic: Rename variables and functions " tip-bot for Baoquan He
2018-02-14  5:46 ` [PATCH v5 6/6] x86/apic: Set up through-local-APIC on boot CPU if 'noapic' specified Baoquan He
2018-02-17 11:43   ` [tip:x86/apic] x86/apic: Set up through-local-APIC mode on the " tip-bot for Baoquan He
2018-02-16  9:38 ` [PATCH v5 0/6] x86/apic: Fix restoring boot irq mode in reboot and kexec/kdump Ingo Molnar
2018-02-16 10:24   ` Baoquan He
2018-02-17 10:46     ` Ingo Molnar
2018-02-17 11:28       ` Baoquan He
2018-02-16 19:16   ` Eric W. Biederman
2018-02-17 10:17     ` Ingo Molnar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=tip-339b2ae0cd5d4a58f9efe06e4ee36adbeca59228@git.kernel.org \
    --to=tipbot@zytor.com \
    --cc=bhe@redhat.com \
    --cc=ebiederm@xmission.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tip-commits@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=peterz@infradead.org \
    --cc=tglx@linutronix.de \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome