mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: tip-bot for Baoquan He <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: peterz@infradead.org, ebiederm@xmission.com, tglx@linutronix.de,
	bhe@redhat.com, linux-kernel@vger.kernel.org, hpa@zytor.com,
	torvalds@linux-foundation.org, mingo@kernel.org
Subject: [tip:x86/apic] x86/apic: Rename variables and functions related to x86_io_apic_ops
Date: Sat, 17 Feb 2018 03:43:07 -0800	[thread overview]
Message-ID: <tip-51b146c572201e3c368e0baa3e565760aefcf25f@git.kernel.org> (raw)
In-Reply-To: <20180214054656.3780-6-bhe@redhat.com>

Commit-ID:  51b146c572201e3c368e0baa3e565760aefcf25f
Gitweb:     https://git.kernel.org/tip/51b146c572201e3c368e0baa3e565760aefcf25f
Author:     Baoquan He <bhe@redhat.com>
AuthorDate: Wed, 14 Feb 2018 13:46:55 +0800
Committer:  Ingo Molnar <mingo@kernel.org>
CommitDate: Sat, 17 Feb 2018 11:47:45 +0100

x86/apic: Rename variables and functions related to x86_io_apic_ops

The names of x86_io_apic_ops and its two member variables are
misleading:

The ->read() member is to read IO_APIC reg, while ->disable()
which is called by native_disable_io_apic()/irq_remapping_disable_io_apic()
is actually used to restore boot IRQ mode, not to disable the IO-APIC.

So rename x86_io_apic_ops to 'x86_apic_ops' since it doesn't only
handle the IO-APIC, but also the local APIC.

Also rename its member variables and the related callbacks.

Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: douly.fnst@cn.fujitsu.com
Cc: joro@8bytes.org
Cc: prarit@redhat.com
Cc: uobergfe@redhat.com
Link: http://lkml.kernel.org/r/20180214054656.3780-6-bhe@redhat.com
[ Rewrote the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/include/asm/io_apic.h  | 6 +++---
 arch/x86/include/asm/x86_init.h | 8 ++++----
 arch/x86/kernel/apic/io_apic.c  | 4 ++--
 arch/x86/kernel/x86_init.c      | 6 +++---
 arch/x86/xen/apic.c             | 2 +-
 drivers/iommu/irq_remapping.c   | 4 ++--
 6 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 8018fc4..fd20a23 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -183,11 +183,11 @@ extern void disable_ioapic_support(void);
 
 extern void __init io_apic_init_mappings(void);
 extern unsigned int native_io_apic_read(unsigned int apic, unsigned int reg);
-extern void native_disable_io_apic(void);
+extern void native_restore_boot_irq_mode(void);
 
 static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
 {
-	return x86_io_apic_ops.read(apic, reg);
+	return x86_apic_ops.io_apic_read(apic, reg);
 }
 
 extern void setup_IO_APIC(void);
@@ -229,7 +229,7 @@ static inline void mp_save_irq(struct mpc_intsrc *m) { }
 static inline void disable_ioapic_support(void) { }
 static inline void io_apic_init_mappings(void) { }
 #define native_io_apic_read		NULL
-#define native_disable_io_apic		NULL
+#define native_restore_boot_irq_mode	NULL
 
 static inline void setup_IO_APIC(void) { }
 static inline void enable_IO_APIC(void) { }
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index fc2f082..8830605 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -274,16 +274,16 @@ struct x86_msi_ops {
 	void (*restore_msi_irqs)(struct pci_dev *dev);
 };
 
-struct x86_io_apic_ops {
-	unsigned int	(*read)   (unsigned int apic, unsigned int reg);
-	void		(*disable)(void);
+struct x86_apic_ops {
+	unsigned int	(*io_apic_read)   (unsigned int apic, unsigned int reg);
+	void		(*restore)(void);
 };
 
 extern struct x86_init_ops x86_init;
 extern struct x86_cpuinit_ops x86_cpuinit;
 extern struct x86_platform_ops x86_platform;
 extern struct x86_msi_ops x86_msi;
-extern struct x86_io_apic_ops x86_io_apic_ops;
+extern struct x86_apic_ops x86_apic_ops;
 
 extern void x86_early_init_platform_quirks(void);
 extern void x86_init_noop(void);
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 9d86b10..68129f1 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1410,7 +1410,7 @@ void __init enable_IO_APIC(void)
 	clear_IO_APIC();
 }
 
-void native_disable_io_apic(void)
+void native_restore_boot_irq_mode(void)
 {
 	/*
 	 * If the i8259 is routed through an IOAPIC
@@ -1443,7 +1443,7 @@ void restore_boot_irq_mode(void)
 	if (!nr_legacy_irqs())
 		return;
 
-	x86_io_apic_ops.disable();
+	x86_apic_ops.restore();
 }
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 1151ccd..2bccd03 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -146,7 +146,7 @@ void arch_restore_msi_irqs(struct pci_dev *dev)
 }
 #endif
 
-struct x86_io_apic_ops x86_io_apic_ops __ro_after_init = {
-	.read			= native_io_apic_read,
-	.disable		= native_disable_io_apic,
+struct x86_apic_ops x86_apic_ops __ro_after_init = {
+	.io_apic_read	= native_io_apic_read,
+	.restore	= native_restore_boot_irq_mode,
 };
diff --git a/arch/x86/xen/apic.c b/arch/x86/xen/apic.c
index de58533..2163888 100644
--- a/arch/x86/xen/apic.c
+++ b/arch/x86/xen/apic.c
@@ -215,7 +215,7 @@ static void __init xen_apic_check(void)
 }
 void __init xen_init_apic(void)
 {
-	x86_io_apic_ops.read = xen_io_apic_read;
+	x86_apic_ops.io_apic_read = xen_io_apic_read;
 	/* On PV guests the APIC CPUID bit is disabled so none of the
 	 * routines end up executing. */
 	if (!xen_initial_domain())
diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 49721b4..496deee 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -27,7 +27,7 @@ int disable_irq_post = 0;
 static int disable_irq_remap;
 static struct irq_remap_ops *remap_ops;
 
-static void irq_remapping_disable_io_apic(void)
+static void irq_remapping_restore_boot_irq_mode(void)
 {
 	/*
 	 * With interrupt-remapping, for now we will use virtual wire A
@@ -42,7 +42,7 @@ static void irq_remapping_disable_io_apic(void)
 
 static void __init irq_remapping_modify_x86_ops(void)
 {
-	x86_io_apic_ops.disable		= irq_remapping_disable_io_apic;
+	x86_apic_ops.restore = irq_remapping_restore_boot_irq_mode;
 }
 
 static __init int setup_nointremap(char *str)

  reply	other threads:[~2018-02-17 11:43 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-14  5:46 [PATCH v5 0/6] x86/apic: Fix restoring boot irq mode in reboot and kexec/kdump Baoquan He
2018-02-14  5:46 ` [PATCH v5 1/6] x86/apic: Split out restore_boot_irq_mode from disable_IO_APIC Baoquan He
2018-02-17 11:41   ` [tip:x86/apic] x86/apic: Split out restore_boot_irq_mode() from disable_IO_APIC() tip-bot for Baoquan He
2018-02-14  5:46 ` [PATCH v5 2/6] x86/apic: Replace disable_IO_APIC for KEXEC_JUMP Baoquan He
2018-02-17 11:41   ` [tip:x86/apic] x86/apic: Split disable_IO_APIC() into two functions to fix CONFIG_KEXEC_JUMP=y tip-bot for Baoquan He
2018-02-14  5:46 ` [PATCH v5 3/6] x86/apic: Fix restoring boot irq mode in reboot and kexec/kdump Baoquan He
2018-02-17 11:42   ` [tip:x86/apic] x86/apic: Fix restoring boot IRQ " tip-bot for Baoquan He
2018-02-14  5:46 ` [PATCH v5 4/6] x86/apic: Remove useless disable_IO_APIC Baoquan He
2018-02-17 11:42   ` [tip:x86/apic] x86/apic: Remove the (now) unused disable_IO_APIC() function tip-bot for Baoquan He
2018-02-14  5:46 ` [PATCH v5 5/6] x86/apic: Rename variable/function related to x86_io_apic_ops Baoquan He
2018-02-17 11:43   ` tip-bot for Baoquan He [this message]
2018-02-14  5:46 ` [PATCH v5 6/6] x86/apic: Set up through-local-APIC on boot CPU if 'noapic' specified Baoquan He
2018-02-17 11:43   ` [tip:x86/apic] x86/apic: Set up through-local-APIC mode on the " tip-bot for Baoquan He
2018-02-16  9:38 ` [PATCH v5 0/6] x86/apic: Fix restoring boot irq mode in reboot and kexec/kdump Ingo Molnar
2018-02-16 10:24   ` Baoquan He
2018-02-17 10:46     ` Ingo Molnar
2018-02-17 11:28       ` Baoquan He
2018-02-16 19:16   ` Eric W. Biederman
2018-02-17 10:17     ` Ingo Molnar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=tip-51b146c572201e3c368e0baa3e565760aefcf25f@git.kernel.org \
    --to=tipbot@zytor.com \
    --cc=bhe@redhat.com \
    --cc=ebiederm@xmission.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tip-commits@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=peterz@infradead.org \
    --cc=tglx@linutronix.de \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome