From: tip-bot for Thomas Gleixner <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, paulmck@linux.vnet.ibm.com,
hpa@zytor.com, mingo@kernel.org, rostedt@goodmis.org,
tedheadster@gmail.com, tglx@linutronix.de
Subject: [tip:timers/urgent] NOHZ: Check for nohz active instead of nohz enabled
Date: Tue, 19 Nov 2013 10:07:23 -0800 [thread overview]
Message-ID: <tip-d689fe222a858c767cb8594faf280048e532b53f@git.kernel.org> (raw)
In-Reply-To: <alpine.DEB.2.02.1311132052240.30673@ionos.tec.linutronix.de>
Commit-ID: d689fe222a858c767cb8594faf280048e532b53f
Gitweb: http://git.kernel.org/tip/d689fe222a858c767cb8594faf280048e532b53f
Author: Thomas Gleixner <tglx@linutronix.de>
AuthorDate: Wed, 13 Nov 2013 21:01:57 +0100
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Tue, 19 Nov 2013 14:59:50 +0100
NOHZ: Check for nohz active instead of nohz enabled
RCU and the fine grained idle time accounting functions check
tick_nohz_enabled. But that variable is merily telling that NOHZ has
been enabled in the config and not been disabled on the command line.
But it does not tell anything about nohz being active. That's what all
this should check for.
Matthew reported, that the idle accounting on his old P1 machine
showed bogus values, when he enabled NOHZ in the config and did not
disable it on the kernel command line. The reason is that his machine
uses (refined) jiffies as a clocksource which explains why the "fine"
grained accounting went into lala land, because it depends on when the
system goes and leaves idle relative to the jiffies increment.
Provide a tick_nohz_active indicator and let RCU and the accounting
code use this instead of tick_nohz_enable.
Reported-and-tested-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: john.stultz@linaro.org
Cc: mwhitehe@redhat.com
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311132052240.30673@ionos.tec.linutronix.de
---
kernel/rcu/tree_plugin.h | 4 ++--
kernel/time/tick-sched.c | 21 +++++++++------------
2 files changed, 11 insertions(+), 14 deletions(-)
diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h
index 6abb03d..08a7652 100644
--- a/kernel/rcu/tree_plugin.h
+++ b/kernel/rcu/tree_plugin.h
@@ -1632,7 +1632,7 @@ module_param(rcu_idle_gp_delay, int, 0644);
static int rcu_idle_lazy_gp_delay = RCU_IDLE_LAZY_GP_DELAY;
module_param(rcu_idle_lazy_gp_delay, int, 0644);
-extern int tick_nohz_enabled;
+extern int tick_nohz_active;
/*
* Try to advance callbacks for all flavors of RCU on the current CPU, but
@@ -1729,7 +1729,7 @@ static void rcu_prepare_for_idle(int cpu)
int tne;
/* Handle nohz enablement switches conservatively. */
- tne = ACCESS_ONCE(tick_nohz_enabled);
+ tne = ACCESS_ONCE(tick_nohz_active);
if (tne != rdtp->tick_nohz_enabled_snap) {
if (rcu_cpu_has_callbacks(cpu, NULL))
invoke_rcu_core(); /* force nohz to see update. */
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 3612fc7..a12df5a 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -361,8 +361,8 @@ void __init tick_nohz_init(void)
/*
* NO HZ enabled ?
*/
-int tick_nohz_enabled __read_mostly = 1;
-
+static int tick_nohz_enabled __read_mostly = 1;
+int tick_nohz_active __read_mostly;
/*
* Enable / Disable tickless mode
*/
@@ -465,7 +465,7 @@ u64 get_cpu_idle_time_us(int cpu, u64 *last_update_time)
struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
ktime_t now, idle;
- if (!tick_nohz_enabled)
+ if (!tick_nohz_active)
return -1;
now = ktime_get();
@@ -506,7 +506,7 @@ u64 get_cpu_iowait_time_us(int cpu, u64 *last_update_time)
struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
ktime_t now, iowait;
- if (!tick_nohz_enabled)
+ if (!tick_nohz_active)
return -1;
now = ktime_get();
@@ -799,11 +799,6 @@ void tick_nohz_idle_enter(void)
local_irq_disable();
ts = &__get_cpu_var(tick_cpu_sched);
- /*
- * set ts->inidle unconditionally. even if the system did not
- * switch to nohz mode the cpu frequency governers rely on the
- * update of the idle time accounting in tick_nohz_start_idle().
- */
ts->inidle = 1;
__tick_nohz_idle_enter(ts);
@@ -973,7 +968,7 @@ static void tick_nohz_switch_to_nohz(void)
struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched);
ktime_t next;
- if (!tick_nohz_enabled)
+ if (!tick_nohz_active)
return;
local_irq_disable();
@@ -981,7 +976,7 @@ static void tick_nohz_switch_to_nohz(void)
local_irq_enable();
return;
}
-
+ tick_nohz_active = 1;
ts->nohz_mode = NOHZ_MODE_LOWRES;
/*
@@ -1139,8 +1134,10 @@ void tick_setup_sched_timer(void)
}
#ifdef CONFIG_NO_HZ_COMMON
- if (tick_nohz_enabled)
+ if (tick_nohz_enabled) {
ts->nohz_mode = NOHZ_MODE_HIGHRES;
+ tick_nohz_active = 1;
+ }
#endif
}
#endif /* HIGH_RES_TIMERS */
next prev parent reply other threads:[~2013-11-19 18:08 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-13 11:39 nohz problem with idle time on old hardware Matthew Whitehead
2013-11-13 14:02 ` Thomas Gleixner
2013-11-13 15:21 ` Steven Rostedt
2013-11-13 15:31 ` Steven Rostedt
2013-11-13 15:50 ` Thomas Gleixner
2013-11-13 16:17 ` Paul E. McKenney
2013-11-13 15:57 ` Steven Rostedt
2013-11-13 16:07 ` Thomas Gleixner
2013-11-13 16:12 ` Steven Rostedt
2013-11-13 16:18 ` Paul E. McKenney
2013-11-13 16:23 ` Steven Rostedt
2013-11-13 16:35 ` Paul E. McKenney
2013-11-13 20:01 ` Thomas Gleixner
2013-11-13 20:07 ` Steven Rostedt
2013-11-13 21:49 ` Matthew Whitehead
2013-11-18 22:44 ` Paul E. McKenney
2013-11-19 18:07 ` tip-bot for Thomas Gleixner [this message]
2014-04-09 13:51 ` Viresh Kumar
2014-04-09 14:31 ` Steven Rostedt
2014-04-09 15:20 ` Viresh Kumar
2014-04-09 15:29 ` Steven Rostedt
2014-04-09 15:31 ` Steven Rostedt
2014-04-09 15:34 ` Viresh Kumar
2014-04-09 15:39 ` Steven Rostedt
2014-04-09 15:56 ` Viresh Kumar
2014-04-09 16:15 ` Steven Rostedt
2014-04-09 15:11 ` Frederic Weisbecker
2013-11-13 16:21 ` Thomas Gleixner
2013-11-13 16:31 ` Steven Rostedt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-d689fe222a858c767cb8594faf280048e532b53f@git.kernel.org \
--to=tipbot@zytor.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=paulmck@linux.vnet.ibm.com \
--cc=rostedt@goodmis.org \
--cc=tedheadster@gmail.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome