From: Stefan Richter <stefanr@s5r6.in-berlin.de>
To: Jarod Wilson <jwilson@redhat.com>
Cc: linux1394-devel@lists.sourceforge.net,
"Kristian Høgsberg" <krh@redhat.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH update 2] firewire: fix "kobject_add failed for fw* with -EEXIST"
Date: Sat, 2 Feb 2008 15:01:09 +0100 (CET) [thread overview]
Message-ID: <tkrat.8cbc5b27d5869b96@s5r6.in-berlin.de> (raw)
In-Reply-To: <479E65E5.4060307@s5r6.in-berlin.de>
There is a race between shutdown and creation of devices: fw-core may
attempt to add a device with the same name of an already existing
device. http://bugzilla.kernel.org/show_bug.cgi?id=9828
Impact of the bug: Happens rarely (when shutdown of a device coincides
with creation of another), forces the user to unplug and replug the new
device to get it working.
The fix is obvious: Free the minor number *after* instead of *before*
device_unregister(). This requires to take an additional reference of
the fw_device as long as the IDR tree points to it.
And while we are at it, we fix an additional race condition:
fw_device_op_open() took its reference of the fw_device a little bit too
late, hence was in danger to access an already invalid fw_device.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
drivers/firewire/fw-cdev.c | 8 +++++---
drivers/firewire/fw-device.c | 20 ++++++++++++++------
drivers/firewire/fw-device.h | 2 +-
3 files changed, 20 insertions(+), 10 deletions(-)
Index: linux/drivers/firewire/fw-device.c
===================================================================
--- linux.orig/drivers/firewire/fw-device.c
+++ linux/drivers/firewire/fw-device.c
@@ -610,12 +610,14 @@ static DECLARE_RWSEM(idr_rwsem);
static DEFINE_IDR(fw_device_idr);
int fw_cdev_major;
-struct fw_device *fw_device_from_devt(dev_t devt)
+struct fw_device *fw_device_get_by_devt(dev_t devt)
{
struct fw_device *device;
down_read(&idr_rwsem);
device = idr_find(&fw_device_idr, MINOR(devt));
+ if (device)
+ fw_device_get(device);
up_read(&idr_rwsem);
return device;
@@ -627,13 +629,14 @@ static void fw_device_shutdown(struct wo
container_of(work, struct fw_device, work.work);
int minor = MINOR(device->device.devt);
- down_write(&idr_rwsem);
- idr_remove(&fw_device_idr, minor);
- up_write(&idr_rwsem);
-
fw_device_cdev_remove(device);
device_for_each_child(&device->device, NULL, shutdown_unit);
device_unregister(&device->device);
+
+ down_write(&idr_rwsem);
+ idr_remove(&fw_device_idr, minor);
+ up_write(&idr_rwsem);
+ fw_device_put(device);
}
static struct device_type fw_device_type = {
@@ -682,10 +685,13 @@ static void fw_device_init(struct work_s
}
err = -ENOMEM;
+
+ fw_device_get(device);
down_write(&idr_rwsem);
if (idr_pre_get(&fw_device_idr, GFP_KERNEL))
err = idr_get_new(&fw_device_idr, device, &minor);
up_write(&idr_rwsem);
+
if (err < 0)
goto error;
@@ -741,7 +747,9 @@ static void fw_device_init(struct work_s
idr_remove(&fw_device_idr, minor);
up_write(&idr_rwsem);
error:
- put_device(&device->device);
+ fw_device_put(device); /* fw_device_idr's reference */
+
+ put_device(&device->device); /* our reference */
}
static int update_unit(struct device *dev, void *data)
Index: linux/drivers/firewire/fw-cdev.c
===================================================================
--- linux.orig/drivers/firewire/fw-cdev.c
+++ linux/drivers/firewire/fw-cdev.c
@@ -109,15 +109,17 @@ static int fw_device_op_open(struct inod
struct client *client;
unsigned long flags;
- device = fw_device_from_devt(inode->i_rdev);
+ device = fw_device_get_by_devt(inode->i_rdev);
if (device == NULL)
return -ENODEV;
client = kzalloc(sizeof(*client), GFP_KERNEL);
- if (client == NULL)
+ if (client == NULL) {
+ fw_device_put(device);
return -ENOMEM;
+ }
- client->device = fw_device_get(device);
+ client->device = device;
INIT_LIST_HEAD(&client->event_list);
INIT_LIST_HEAD(&client->resource_list);
spin_lock_init(&client->lock);
Index: linux/drivers/firewire/fw-device.h
===================================================================
--- linux.orig/drivers/firewire/fw-device.h
+++ linux/drivers/firewire/fw-device.h
@@ -77,13 +77,13 @@ fw_device_is_shutdown(struct fw_device *
}
struct fw_device *fw_device_get(struct fw_device *device);
+struct fw_device *fw_device_get_by_devt(dev_t devt);
void fw_device_put(struct fw_device *device);
int fw_device_enable_phys_dma(struct fw_device *device);
void fw_device_cdev_update(struct fw_device *device);
void fw_device_cdev_remove(struct fw_device *device);
-struct fw_device *fw_device_from_devt(dev_t devt);
extern int fw_cdev_major;
struct fw_unit {
--
Stefan Richter
-=====-==--- --=- ---=-
http://arcgraph.de/sr/
next prev parent reply other threads:[~2008-02-02 14:02 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-27 0:05 [PATCH] " Stefan Richter
2008-01-27 17:20 ` [PATCH update] " Stefan Richter
2008-01-27 17:21 ` [PATCH] firewire: fail open() quickly if the node doesn't exist anymore Stefan Richter
2008-01-28 22:32 ` Jarod Wilson
2008-01-28 23:50 ` Stefan Richter
2008-01-28 16:48 ` [PATCH update] firewire: fix "kobject_add failed for fw* with -EEXIST" Jarod Wilson
2008-01-28 18:54 ` Stefan Richter
2008-01-28 22:24 ` Jarod Wilson
2008-01-28 19:16 ` Stefan Richter
2008-01-28 23:31 ` Stefan Richter
2008-02-02 14:01 ` Stefan Richter [this message]
2008-01-28 22:30 ` Jarod Wilson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tkrat.8cbc5b27d5869b96@s5r6.in-berlin.de \
--to=stefanr@s5r6.in-berlin.de \
--cc=jwilson@redhat.com \
--cc=krh@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux1394-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®