mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
To: linux1394-devel@lists.sourceforge.net
Cc: "Jarod Wilson" <jarod@redhat.com>,
	"Kristian  Høgsberg" <krh@bitplanet.net>,
	linux-kernel@vger.kernel.org
Subject: [PATCH revised] firewire: sbp2: add workarounds for 2nd and 3rd generation iPods
Date: Thu, 29 Jan 2009 00:11:59 +0100 (CET)	[thread overview]
Message-ID: <tkrat.a24a8ff6f4c5711f@s5r6.in-berlin.de> (raw)
In-Reply-To: <200901281725.25750.jarod@redhat.com>

According to https://bugs.launchpad.net/bugs/294391
  - 3rd generation iPods need the "fix capacity" workaround after all
    (apparently they crash after the last sector was accessed),
  - 2nd generation iPods need the "128 kB maximum request size"
    workaround.

Alas both iPod generations feature the same model ID in the config ROM,
hence we can only define a shared quirks list entry for them.  Luckily
the fix capacity workaround did not show a negative effect in Jarod's
tests with 2nd gen. iPod.

A side note:  Apple computers in target mode (or at least an x86 Mac
mini) don't have firmware_version and model_id, hence none of the iPod
quirks list entries is active for them.

Tested-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
 drivers/firewire/fw-sbp2.c |   16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

Index: linux/drivers/firewire/fw-sbp2.c
===================================================================
--- linux.orig/drivers/firewire/fw-sbp2.c
+++ linux/drivers/firewire/fw-sbp2.c
@@ -360,15 +360,17 @@ static const struct {
 		.model			= SBP2_ROM_VALUE_WILDCARD,
 		.workarounds		= SBP2_WORKAROUND_128K_MAX_TRANS,
 	},
-
 	/*
-	 * There are iPods (2nd gen, 3rd gen) with model_id == 0, but
-	 * these iPods do not feature the read_capacity bug according
-	 * to one report.  Read_capacity behaviour as well as model_id
-	 * could change due to Apple-supplied firmware updates though.
+	 * iPod 2nd generation: needs 128k max transfer size workaround
+	 * iPod 3rd generation: needs fix capacity workaround
 	 */
-
-	/* iPod 4th generation. */ {
+	{
+		.firmware_revision	= 0x0a2700,
+		.model			= 0x000000,
+		.workarounds		= SBP2_WORKAROUND_128K_MAX_TRANS |
+					  SBP2_WORKAROUND_FIX_CAPACITY,
+	},
+	/* iPod 4th generation */ {
 		.firmware_revision	= 0x0a2700,
 		.model			= 0x000021,
 		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,

-- 
Stefan Richter
-=====-==--= ---= ===-=
http://arcgraph.de/sr/


  reply	other threads:[~2009-01-28 23:12 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-01-24 18:41 [PATCH 0/7] ieee1394 + firewire: misc sbp2 updates Stefan Richter
2009-01-24 18:42 ` [PATCH 1/7] firewire: sbp2: fix payload limit at S1600 and S3200 Stefan Richter
2009-01-24 18:42 ` [PATCH 2/7] firewire: sbp2: define some magic numbers as macros Stefan Richter
2009-01-24 18:43 ` [PATCH 3/7] ieee1394: sbp2: fix payload limit at S1600 and S3200 Stefan Richter
2009-01-24 18:44 ` [PATCH 4/7] ieee1394: sbp2: don't assume zero model_id or firmware_revision if there is none Stefan Richter
2009-01-24 18:45 ` [PATCH 5/7] ieee1394: sbp2: follow up on "ieee1394: inherit ud vendor_id from node vendor_id" Stefan Richter
2009-01-24 18:45 ` [PATCH RFT 6/7] ieee1394: sbp2: add workarounds for 2nd and 3rd generation iPods Stefan Richter
2009-01-24 22:29   ` Stefan Richter
2009-01-24 18:46 ` [PATCH RFT 7/7] firewire: " Stefan Richter
2009-01-28 22:18   ` Jarod Wilson
2009-01-28 22:25     ` Jarod Wilson
2009-01-28 23:11       ` Stefan Richter [this message]
2009-01-28 23:13         ` [PATCH revised] ieee1394: " Stefan Richter
2009-01-29  3:21           ` Jarod Wilson
2009-01-29  3:20         ` [PATCH revised] firewire: " Jarod Wilson
2009-01-28 23:11     ` [PATCH RFT 7/7] " Stefan Richter
2009-01-29  3:18       ` Jarod Wilson
2009-01-29 20:09         ` Stefan Richter
2009-01-29 20:40           ` Alan Stern
2009-01-29 21:28             ` Stefan Richter
2009-01-29 22:38               ` Alan Stern
2009-01-30 15:16               ` Jarod Wilson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=tkrat.a24a8ff6f4c5711f@s5r6.in-berlin.de \
    --to=stefanr@s5r6.in-berlin.de \
    --cc=jarod@redhat.com \
    --cc=krh@bitplanet.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux1394-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®