Re: Tearing down DMA transfer setup after DMA client has finished

["Måns Rullgård" <mans@mansr.com>]

Mason <slash.tmp@free.fr> writes:

> On 06/12/2016 14:14, Måns Rullgård wrote:
>
>> Mason wrote:
>> 
>>> On 06/12/2016 06:12, Vinod Koul wrote:
>>>
>>>> On Tue, Nov 29, 2016 at 07:25:02PM +0100, Mason wrote:
>>>>
>>>>> Is there a way to write a driver within the existing framework?
>>>>
>>>> I think so, looking back at comments from Russell, I do tend to agree with
>>>> that. Is there a specific reason why sbox can't be tied to alloc and free
>>>> channels?
>>>
>>> Here's a recap of the situation.
>>>
>>> The "SBOX+MBUS" HW is used in several iterations of the tango SoC:
>>>
>>> tango3
>>>   2 memory channels available
>>>   6 devices ("clients"?) may request an MBUS channel
>>>
>>> tango4 (one more channel)
>>>   3 memory channels available
>>>   7 devices may request an MBUS channel :
>>>     NFC0, NFC1, SATA0, SATA1, memcpy, (IDE0, IDE1)
>>>
>>> Notes:
>>> The current NFC driver supports only one controller.
>> 
>> I consider that a bug.
>
> Meh. The two controller blocks share the I/O pins to the outside
> world, so it's not possible to have two concurrent accesses.

OK, you failed to mention that part.  Why are there two controllers at
all if only one or the other can be used?

>>> If I understand the current DMA driver (written by Mans), client
>>> drivers are instructed to use a specific channel in the DT, and
>>> the DMA driver muxes access to that channel.
>> 
>> Almost.  The DT indicates the sbox ID of each device.  The driver
>> multiplexes requests from all devices across all channels.
>
> Thanks for pointing that out. I misremembered the DT.
> So a client's DT node specifies the client's SBOX port.
> And the DMA node specifies all available MBUS channels.
>
> So when an interrupt fires, the DMA driver (re)uses that
> channel for the next transfer in line?

Correct.

>>> The DMA driver manages a per-channel queue of outstanding DMA transfer
>>> requests, and a new transfer is started from within the DMA ISR
>>> (modulo the fact that the interrupt does not signal completion of the
>>> transfer, as explained else-thread).
>> 
>> We need to somehow let the device driver signal the dma driver when a
>> transfer has been fully completed.  Currently the only post-transfer
>> interaction between the dma engine and the device driver is through the
>> descriptor callback, which is not suitable for this purpose.
>
> The callback is called from vchan_complete() right?
> Is that running from interrupt context?

It runs from a tasklet which is almost the same thing.

> What's the relationship between vchan_complete() and
> tangox_dma_irq() -- does one call the other? Are they
> asynchronous?
>
>> This is starting to look like one of those situations where someone just
>> needs to implement a solution, or we'll be forever bickering about
>> hypotheticals.
>
> I can give that a shot (if you're busy with real work).

I have an idea I'd like to try out over the weekend.  If I don't come
back with something by next week, go for it.

>>> What you're proposing, Vinod, is to make a channel exclusive
>>> to a driver, as long as the driver has not explicitly released
>>> the channel, via dma_release_channel(), right?
>> 
>> That's not going to work very well.  Device drivers typically request
>> dma channels in their probe functions or when the device is opened.
>> This means that reserving one of the few channels there will inevitably
>> make some other device fail to operate.
>
> This is true for tango3. Less so for tango4. And no longer
> an issue for tango5.
>
>> Doing a request/release per transfer really doesn't fit with the
>> intended usage of the dmaengine api.  For starters, what should a driver
>> do if all the channels are currently busy?
>
> Why can't we queue channel requests the same way we queue
> transfer requests?

That's in effect what we're doing.  Calling it by another name doesn't
really solve anything.

-- 
Måns Rullgård