Re: [PATCH v3 5/9] reset: amlogic: use reset number instead of register count

[Neil Armstrong <neil.armstrong@linaro.org>]

On 08/08/2024 12:27, Jerome Brunet wrote:
> The reset driver from audio clock controller may register less
> reset than a register can hold. To avoid making any change while
> switching to auxiliary support, use the number of reset instead of the
> register count to define the bounds of the reset controller.
> 
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
>   drivers/reset/reset-meson.c | 11 +++++------
>   1 file changed, 5 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c
> index 8addd100e601..5b6f934c0265 100644
> --- a/drivers/reset/reset-meson.c
> +++ b/drivers/reset/reset-meson.c
> @@ -17,7 +17,7 @@
>   #include <linux/types.h>
>   
>   struct meson_reset_param {
> -	unsigned int reg_count;
> +	unsigned int reset_num;
>   	unsigned int reset_offset;
>   	unsigned int level_offset;
>   	bool level_low_reset;
> @@ -87,21 +87,21 @@ static const struct reset_control_ops meson_reset_ops = {
>   };
>   
>   static const struct meson_reset_param meson8b_param = {
> -	.reg_count	= 8,
> +	.reset_num	= 256,
>   	.reset_offset	= 0x0,
>   	.level_offset	= 0x7c,
>   	.level_low_reset = true,
>   };
>   
>   static const struct meson_reset_param meson_a1_param = {
> -	.reg_count	= 3,
> +	.reset_num	= 96,
>   	.reset_offset	= 0x0,
>   	.level_offset	= 0x40,
>   	.level_low_reset = true,
>   };
>   
>   static const struct meson_reset_param meson_s4_param = {
> -	.reg_count	= 6,
> +	.reset_num	= 192,
>   	.reset_offset	= 0x0,
>   	.level_offset	= 0x40,
>   	.level_low_reset = true,
> @@ -148,8 +148,7 @@ static int meson_reset_probe(struct platform_device *pdev)
>   				     "can't init regmap mmio region\n");
>   
>   	data->rcdev.owner = THIS_MODULE;
> -	data->rcdev.nr_resets = data->param->reg_count * BITS_PER_BYTE
> -		* regmap_config.reg_stride;
> +	data->rcdev.nr_resets = data->param->reset_num;
>   	data->rcdev.ops = &meson_reset_ops;
>   	data->rcdev.of_node = dev->of_node;
>   

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic