From: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
To: ralf@linux-mips.org, linux-mips@linux-mips.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 01/17] [MIPS] Malta: use Linux kernel style for structure initialization
Date: Thu, 24 Jan 2008 19:52:41 +0300 [thread overview]
Message-ID: <1201193577-4261-2-git-send-email-dmitri.vorobiev@gmail.com> (raw)
In-Reply-To: <1201193577-4261-1-git-send-email-dmitri.vorobiev@gmail.com>
This patch reformats the structure initialization code thus
making the latter look idiomatic.
No functional changes introduced.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
---
arch/mips/mips-boards/malta/malta_setup.c | 56 +++++++++++++++++++++-------
1 files changed, 42 insertions(+), 14 deletions(-)
diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c
index bc43a5c..d051405 100644
--- a/arch/mips/mips-boards/malta/malta_setup.c
+++ b/arch/mips/mips-boards/malta/malta_setup.c
@@ -43,11 +43,36 @@ extern void kgdb_config(void);
#endif
struct resource standard_io_resources[] = {
- { .name = "dma1", .start = 0x00, .end = 0x1f, .flags = IORESOURCE_BUSY },
- { .name = "timer", .start = 0x40, .end = 0x5f, .flags = IORESOURCE_BUSY },
- { .name = "keyboard", .start = 0x60, .end = 0x6f, .flags = IORESOURCE_BUSY },
- { .name = "dma page reg", .start = 0x80, .end = 0x8f, .flags = IORESOURCE_BUSY },
- { .name = "dma2", .start = 0xc0, .end = 0xdf, .flags = IORESOURCE_BUSY },
+ {
+ .name = "dma1",
+ .start = 0x00,
+ .end = 0x1f,
+ .flags = IORESOURCE_BUSY
+ },
+ {
+ .name = "timer",
+ .start = 0x40,
+ .end = 0x5f,
+ .flags = IORESOURCE_BUSY
+ },
+ {
+ .name = "keyboard",
+ .start = 0x60,
+ .end = 0x6f,
+ .flags = IORESOURCE_BUSY
+ },
+ {
+ .name = "dma page reg",
+ .start = 0x80,
+ .end = 0x8f,
+ .flags = IORESOURCE_BUSY
+ },
+ {
+ .name = "dma2",
+ .start = 0xc0,
+ .end = 0xdf,
+ .flags = IORESOURCE_BUSY
+ },
};
const char *get_system_type(void)
@@ -171,15 +196,18 @@ void __init plat_mem_setup(void)
#ifdef CONFIG_VT
#if defined(CONFIG_VGA_CONSOLE)
screen_info = (struct screen_info) {
- 0, 25, /* orig-x, orig-y */
- 0, /* unused */
- 0, /* orig-video-page */
- 0, /* orig-video-mode */
- 80, /* orig-video-cols */
- 0, 0, 0, /* ega_ax, ega_bx, ega_cx */
- 25, /* orig-video-lines */
- VIDEO_TYPE_VGAC, /* orig-video-isVGA */
- 16 /* orig-video-points */
+ .orig_x = 0,
+ .orig_y = 25,
+ .ext_mem_k = 0,
+ .orig_video_page = 0,
+ .orig_video_mode = 0,
+ .orig_video_cols = 80,
+ .unused2 = 0,
+ .orig_video_ega_bx = 0,
+ .unused3 = 0,
+ .orig_video_lines = 25,
+ .orig_video_isVGA = VIDEO_TYPE_VGAC,
+ .orig_video_points = 16
};
#endif
#endif
--
1.5.3
next prev parent reply other threads:[~2008-01-24 16:53 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-24 16:52 [PATCH 00/17] [MIPS] Malta: massive code cleanup Dmitri Vorobiev
2008-01-24 16:52 ` Dmitri Vorobiev [this message]
2008-01-24 16:52 ` [PATCH 02/17] [MIPS] Malta: use the KERN_ facility level in printk() Dmitri Vorobiev
2008-01-24 16:52 ` [PATCH 03/17] [MIPS] Malta: check the PCI clock frequency in a separate function Dmitri Vorobiev
2008-01-24 16:52 ` [PATCH 04/17] [MIPS] Malta: set up the screen info " Dmitri Vorobiev
2008-01-24 16:52 ` [PATCH 05/17] [MIPS] Malta: use tabs not spaces Dmitri Vorobiev
2008-01-24 16:52 ` [PATCH 06/17] [MIPS] Malta: remove a dead function declaration Dmitri Vorobiev
2008-01-24 16:52 ` [PATCH 07/17] [MIPS] Malta: fix oversized lines in malta_int.c Dmitri Vorobiev
2008-01-24 16:52 ` [PATCH 08/17] [MIPS] Malta, Atlas, Sead: remove an extern from .c files Dmitri Vorobiev
2008-01-24 16:52 ` [PATCH 09/17] [MIPS] Malta: include <linux/cpu.h> instead of <asm/cpu.h> Dmitri Vorobiev
2008-01-24 16:52 ` [PATCH 10/17] [MIPS] Malta: remove a superfluous comment Dmitri Vorobiev
2008-01-24 16:52 ` [PATCH 11/17] [MIPS] Malta: else should follow close brace in malta_int.c Dmitri Vorobiev
2008-01-24 16:52 ` [PATCH 12/17] [MIPS] Malta: Use C89 style for comments Dmitri Vorobiev
2008-01-24 16:52 ` [PATCH 13/17] [MIPS] Malta, Atlas: move an extern function declaration to the header file Dmitri Vorobiev
2008-01-24 16:52 ` [PATCH 14/17] [MIPS] Malta: fix braces at single statement blocks Dmitri Vorobiev
2008-01-24 16:52 ` [PATCH 15/17] [MIPS] Malta: make the helper function static Dmitri Vorobiev
2008-01-24 16:52 ` [PATCH 16/17] [MIPS] Malta: remaining bits of the board support code cleanup Dmitri Vorobiev
2008-01-24 16:52 ` [PATCH 17/17] [MIPS] remove Documentation/mips/GT64120.README Dmitri Vorobiev
2008-01-28 14:33 ` [PATCH 00/17] [MIPS] Malta: massive code cleanup Ralf Baechle
2008-01-28 14:36 ` Dmitri Vorobiev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1201193577-4261-2-git-send-email-dmitri.vorobiev@gmail.com \
--to=dmitri.vorobiev@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome