From: Tejun Heo <tj@kernel.org>
To: linux-kernel@vger.kernel.org, x86@kernel.org, yinghai@kernel.org,
brgerst@gmail.com, gorcunov@gmail.com, shaohui.zheng@intel.com,
rientjes@google.com, mingo@elte.hu, hpa@linux.intel.com
Cc: Tejun Heo <tj@kernel.org>
Subject: [PATCH 02/26] x86-64, NUMA: Simplify hotplug node handling in acpi_numa_memory_affinity_init()
Date: Sat, 12 Feb 2011 18:10:39 +0100 [thread overview]
Message-ID: <1297530663-26234-3-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1297530663-26234-1-git-send-email-tj@kernel.org>
Hotplug node handling in acpi_numa_memory_affinity_init() was
unnecessarily complicated with storing the original nodes[] entry and
restoring it afterwards. Simplify it by not modifying the nodes[]
entry for hotplug nodes from the beginning.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
---
arch/x86/mm/srat_64.c | 31 +++++++++++++------------------
1 files changed, 13 insertions(+), 18 deletions(-)
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 9a97261..e3e0dd3 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -251,7 +251,7 @@ update_nodes_add(int node, unsigned long start, unsigned long end)
void __init
acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
{
- struct bootnode *nd, oldnode;
+ struct bootnode *nd;
unsigned long start, end;
int node, pxm;
int i;
@@ -289,28 +289,23 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
bad_srat();
return;
}
- nd = &nodes[node];
- oldnode = *nd;
- if (!node_test_and_set(node, nodes_parsed)) {
- nd->start = start;
- nd->end = end;
- } else {
- if (start < nd->start)
- nd->start = start;
- if (nd->end < end)
- nd->end = end;
- }
printk(KERN_INFO "SRAT: Node %u PXM %u %lx-%lx\n", node, pxm,
start, end);
- if (ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) {
+ if (!(ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE)) {
+ nd = &nodes[node];
+ if (!node_test_and_set(node, nodes_parsed)) {
+ nd->start = start;
+ nd->end = end;
+ } else {
+ if (start < nd->start)
+ nd->start = start;
+ if (nd->end < end)
+ nd->end = end;
+ }
+ } else
update_nodes_add(node, start, end);
- /* restore nodes[node] */
- *nd = oldnode;
- if ((nd->start | nd->end) == 0)
- node_clear(node, nodes_parsed);
- }
node_memblk_range[num_node_memblks].start = start;
node_memblk_range[num_node_memblks].end = end;
--
1.7.1
next prev parent reply other threads:[~2011-02-12 17:11 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-12 17:10 [PATCHSET x86/numa] x86-64, NUMA: bring sanity to NUMA configuration Tejun Heo
2011-02-12 17:10 ` [PATCH 01/26] x86-64, NUMA: Make dummy node initialization path similar to non-dummy ones Tejun Heo
2011-02-12 17:52 ` Yinghai Lu
2011-02-12 17:10 ` Tejun Heo [this message]
2011-02-12 17:47 ` [PATCH 02/26] x86-64, NUMA: Simplify hotplug node handling in acpi_numa_memory_affinity_init() Yinghai Lu
2011-02-12 17:56 ` Tejun Heo
2011-02-12 18:04 ` Yinghai Lu
2011-02-12 18:06 ` Tejun Heo
2011-02-12 18:13 ` Yinghai Lu
2011-02-14 11:25 ` Tejun Heo
2011-02-14 16:12 ` Yinghai Lu
2011-02-12 17:10 ` [PATCH 03/26] x86-64, NUMA: Drop @start/last_pfn from initmem_init() Tejun Heo
2011-02-12 17:58 ` Yinghai Lu
2011-02-12 18:03 ` Tejun Heo
2011-02-14 13:50 ` [PATCH UPDATED 03/26] x86, NUMA: Drop @start/last_pfn from initmem_init() initmem_init() Tejun Heo
2011-02-14 14:20 ` Ingo Molnar
2011-02-14 14:58 ` Tejun Heo
2011-02-14 19:03 ` Yinghai Lu
2011-02-14 19:31 ` Tejun Heo
2011-02-15 2:29 ` Ingo Molnar
2011-02-12 17:10 ` [PATCH 04/26] x86-64, NUMA: Unify {acpi|amd}_{numa_init|scan_nodes}() arguments and return values Tejun Heo
2011-02-12 18:39 ` Yinghai Lu
2011-02-14 11:29 ` Tejun Heo
2011-02-14 16:14 ` Yinghai Lu
2011-02-14 16:18 ` Tejun Heo
2011-02-14 18:00 ` Yinghai Lu
2011-02-12 17:10 ` [PATCH 05/26] x86-64, NUMA: Wrap acpi_numa_init() so that failure can be indicated by return value Tejun Heo
2011-02-12 17:10 ` [PATCH 06/26] x86-64, NUMA: Move *_numa_init() invocations into initmem_init() Tejun Heo
2011-02-14 6:10 ` Ankita Garg
2011-02-14 11:09 ` Tejun Heo
2011-02-14 13:51 ` [PATCH UPDATED 06/26] x86, " Tejun Heo
2011-02-14 14:21 ` Ingo Molnar
2011-02-12 17:10 ` [PATCH 07/26] x86-64, NUMA: Restructure initmem_init() Tejun Heo
2011-02-12 17:10 ` [PATCH 08/26] x86-64, NUMA: Use common {cpu|mem}_nodes_parsed Tejun Heo
2011-02-12 17:10 ` [PATCH 09/26] x86-64, NUMA: Remove local variable found from amd_numa_init() Tejun Heo
2011-02-12 17:10 ` [PATCH 10/26] x86-64, NUMA: Move apicid to numa mapping initialization from amd_scan_nodes() to amd_numa_init() Tejun Heo
2011-02-14 22:59 ` Cyrill Gorcunov
2011-02-15 9:36 ` Tejun Heo
2011-02-15 17:31 ` Cyrill Gorcunov
2011-02-15 17:54 ` Yinghai Lu
2011-02-15 18:01 ` Cyrill Gorcunov
2011-02-15 18:27 ` Cyrill Gorcunov
2011-02-15 19:41 ` Yinghai Lu
2011-02-12 17:10 ` [PATCH 11/26] x86-64, NUMA: Use common numa_nodes[] Tejun Heo
2011-02-12 17:10 ` [PATCH 12/26] x86-64, NUMA: Kill {acpi|amd}_get_nodes() Tejun Heo
2011-02-12 17:10 ` [PATCH 13/26] x86-64, NUMA: Factor out memblk handling into numa_{add|register}_memblk() Tejun Heo
2011-02-12 17:10 ` [PATCH 14/26] x86-64, NUMA: Unify use of memblk in all init methods Tejun Heo
2011-02-12 17:10 ` [PATCH 15/26] x86-64, NUMA: Unify the rest of memblk registration Tejun Heo
2011-02-13 0:45 ` Yinghai Lu
2011-02-14 11:32 ` Tejun Heo
2011-02-14 16:08 ` Yinghai Lu
2011-02-14 16:12 ` Tejun Heo
2011-02-14 16:17 ` Yinghai Lu
2011-02-14 16:22 ` Tejun Heo
2011-02-14 18:14 ` Yinghai Lu
2011-02-14 18:27 ` Tejun Heo
2011-02-14 19:07 ` Yinghai Lu
2011-02-14 19:30 ` Tejun Heo
2011-02-14 19:35 ` Yinghai Lu
2011-02-15 9:11 ` Tejun Heo
2011-02-15 9:43 ` Ingo Molnar
2011-02-15 16:49 ` Tejun Heo
2011-02-16 8:41 ` Ingo Molnar
2011-02-16 8:48 ` Ingo Molnar
2011-02-16 9:01 ` Tejun Heo
2011-02-16 9:31 ` Ingo Molnar
2011-02-12 17:10 ` [PATCH 16/26] x86-64, NUMA: Kill {acpi|amd|dummy}_scan_nodes() Tejun Heo
2011-02-12 17:10 ` [PATCH 17/26] x86-64, NUMA: Remove %NULL @nodeids handling from compute_hash_shift() Tejun Heo
2011-02-12 17:10 ` [PATCH 18/26] x86-64, NUMA: Introduce struct numa_meminfo Tejun Heo
2011-02-12 17:10 ` [PATCH 19/26] x86-64, NUMA: Separate out numa_cleanup_meminfo() Tejun Heo
2011-02-12 17:10 ` [PATCH 20/26] x86-64, NUMA: make numa_cleanup_meminfo() prettier Tejun Heo
2011-02-12 17:10 ` [PATCH 21/26] x86-64, NUMA: consolidate and improve memblk sanity checks Tejun Heo
2011-02-12 17:10 ` [PATCH 22/26] x86-64, NUMA: Add common find_node_by_addr() Tejun Heo
2011-02-12 17:11 ` [PATCH 23/26] x86-64, NUMA: kill numa_nodes[] Tejun Heo
2011-02-12 17:11 ` [PATCH 24/26] x86-64, NUMA: Rename cpu_nodes_parsed to numa_nodes_parsed Tejun Heo
2011-02-12 17:11 ` [PATCH 25/26] x86-64, NUMA: Kill mem_nodes_parsed Tejun Heo
2011-02-12 17:11 ` [PATCH 26/26] x86-64, NUMA: Implement generic node distance handling Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1297530663-26234-3-git-send-email-tj@kernel.org \
--to=tj@kernel.org \
--cc=brgerst@gmail.com \
--cc=gorcunov@gmail.com \
--cc=hpa@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=rientjes@google.com \
--cc=shaohui.zheng@intel.com \
--cc=x86@kernel.org \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome