From: Yuan-Hsin Chen <yuanlmm@gmail.com>
To: jgarzik@pobox.com, linux-ide@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: tj@kernel.org, sshtylyov@mvista.com,
Yuan-Hsin Chen <yhchen@faraday-tech.com>
Subject: [PATCH v4] ahci: move ahci_sb600_softreset to libahci.c and rename it
Date: Mon, 20 Jun 2011 16:06:41 +0800 [thread overview]
Message-ID: <1308557202-1895-1-git-send-email-yuanlmm@gmail.com> (raw)
In-Reply-To: <20110617120704.GH2611@htj.dyndns.org>
From: Yuan-Hsin Chen <yhchen@faraday-tech.com>
ahci_sb600_softreset was in ahci.c. This function is used
to fix soft reset failure and renames as ahci_pmp_retry_srst_softreset
in libahci.c.
---
drivers/ata/ahci.c | 54 +---------------------------------------------
drivers/ata/ahci.h | 1 +
drivers/ata/libahci.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 59 insertions(+), 53 deletions(-)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 71afe03..2de36b6 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -79,8 +79,6 @@ enum board_ids {
};
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
-static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline);
static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
@@ -106,8 +104,7 @@ static struct ata_port_operations ahci_p5wdh_ops = {
static struct ata_port_operations ahci_sb600_ops = {
.inherits = &ahci_ops,
- .softreset = ahci_sb600_softreset,
- .pmp_softreset = ahci_sb600_softreset,
+ .softreset = ahci_pmp_retry_srst_softreset,
};
#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
@@ -502,55 +499,6 @@ static void ahci_pci_init_controller(struct ata_host *host)
ahci_init_controller(host);
}
-static int ahci_sb600_check_ready(struct ata_link *link)
-{
- void __iomem *port_mmio = ahci_port_base(link->ap);
- u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
- u32 irq_status = readl(port_mmio + PORT_IRQ_STAT);
-
- /*
- * There is no need to check TFDATA if BAD PMP is found due to HW bug,
- * which can save timeout delay.
- */
- if (irq_status & PORT_IRQ_BAD_PMP)
- return -EIO;
-
- return ata_check_ready(status);
-}
-
-static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- struct ata_port *ap = link->ap;
- void __iomem *port_mmio = ahci_port_base(ap);
- int pmp = sata_srst_pmp(link);
- int rc;
- u32 irq_sts;
-
- DPRINTK("ENTER\n");
-
- rc = ahci_do_softreset(link, class, pmp, deadline,
- ahci_sb600_check_ready);
-
- /*
- * Soft reset fails on some ATI chips with IPMS set when PMP
- * is enabled but SATA HDD/ODD is connected to SATA port,
- * do soft reset again to port 0.
- */
- if (rc == -EIO) {
- irq_sts = readl(port_mmio + PORT_IRQ_STAT);
- if (irq_sts & PORT_IRQ_BAD_PMP) {
- ata_link_printk(link, KERN_WARNING,
- "applying SB600 PMP SRST workaround "
- "and retrying\n");
- rc = ahci_do_softreset(link, class, 0, deadline,
- ahci_check_ready);
- }
- }
-
- return rc;
-}
-
static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 12c5282..b175000 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -312,6 +312,7 @@ extern struct device_attribute *ahci_sdev_attrs[];
.sdev_attrs = ahci_sdev_attrs
extern struct ata_port_operations ahci_ops;
+extern struct ata_port_operations ahci_pmp_retry_srst_ops;
void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
u32 opts);
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index d38c40f..0fd5a30 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -82,6 +82,8 @@ static void ahci_pmp_attach(struct ata_port *ap);
static void ahci_pmp_detach(struct ata_port *ap);
static int ahci_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
+static int ahci_pmp_retry_srst_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
static void ahci_postreset(struct ata_link *link, unsigned int *class);
@@ -141,6 +143,12 @@ struct device_attribute *ahci_sdev_attrs[] = {
};
EXPORT_SYMBOL_GPL(ahci_sdev_attrs);
+struct ata_port_operations ahci_pmp_retry_srst_ops = {
+ .inherits = &ahci_ops,
+ .softreset = ahci_pmp_retry_srst_softreset,
+};
+EXPORT_SYMBOL_GPL(ahci_pmp_retry_srst_ops);
+
struct ata_port_operations ahci_ops = {
.inherits = &sata_pmp_port_ops,
@@ -1329,6 +1337,55 @@ static int ahci_softreset(struct ata_link *link, unsigned int *class,
}
EXPORT_SYMBOL_GPL(ahci_do_softreset);
+static int ahci_pmp_check_ready(struct ata_link *link)
+{
+ void __iomem *port_mmio = ahci_port_base(link->ap);
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
+ u32 irq_status = readl(port_mmio + PORT_IRQ_STAT);
+
+ /*
+ * There is no need to check TFDATA if BAD PMP is found due to HW bug,
+ * which can save timeout delay.
+ */
+ if (irq_status & PORT_IRQ_BAD_PMP)
+ return -EIO;
+
+ return ata_check_ready(status);
+}
+
+static int ahci_pmp_retry_srst_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ int pmp = sata_srst_pmp(link);
+ int rc;
+ u32 irq_sts;
+
+ DPRINTK("ENTER\n");
+
+ rc = ahci_do_softreset(link, class, pmp, deadline,
+ ahci_pmp_check_ready);
+
+ /*
+ * Soft reset fails with IPMS set when PMP is enabled but
+ * SATA HDD/ODD is connected to SATA port, do soft reset
+ * again to port 0.
+ */
+ if (rc == -EIO) {
+ irq_sts = readl(port_mmio + PORT_IRQ_STAT);
+ if (irq_sts & PORT_IRQ_BAD_PMP) {
+ ata_link_printk(link, KERN_WARNING,
+ "applying PMP SRST workaround "
+ "and retrying\n");
+ rc = ahci_do_softreset(link, class, 0, deadline,
+ ahci_check_ready);
+ }
+ }
+
+ return rc;
+}
+
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
--
1.7.3.1
next prev parent reply other threads:[~2011-06-20 8:07 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-14 5:48 [PATCH] ahci: enable pmp but connected to HDD issue fixed Yuan-Hsin Chen
2011-06-14 6:52 ` Tejun Heo
2011-06-15 10:04 ` [PATCH v2] ahci: fix pmp softreset with HDD Yuan-Hsin Chen
2011-06-15 10:14 ` Tejun Heo
2011-06-17 10:39 ` [PATCH v3] ahci: move ahci_sb600_softreset to libahci.c and rename it Yuan-Hsin Chen
2011-06-17 11:34 ` Sergei Shtylyov
2011-06-17 12:07 ` Tejun Heo
2011-06-20 8:06 ` Yuan-Hsin Chen [this message]
2011-06-20 8:15 ` [PATCH v4] " Sergei Shtylyov
2011-06-20 8:47 ` Yuan-Hsin Chen
2011-06-20 8:19 ` Tejun Heo
2011-06-20 10:06 ` Yuan-Hsin Chen
2011-06-20 12:47 ` Tejun Heo
2011-06-21 3:24 ` Yuan-Hsin Chen
2011-06-21 7:17 ` Tejun Heo
2011-06-21 9:17 ` [PATCH v5] " Yuan-Hsin Chen
2011-06-21 9:53 ` Tejun Heo
[not found] ` <BANLkTimiJheFauWXjh-8GszGHoqMOa0Kkw@mail.gmail.com>
2011-06-15 2:50 ` Fwd: [PATCH] ahci: enable pmp but connected to HDD issue fixed BingJiun Luo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1308557202-1895-1-git-send-email-yuanlmm@gmail.com \
--to=yuanlmm@gmail.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sshtylyov@mvista.com \
--cc=tj@kernel.org \
--cc=yhchen@faraday-tech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®