From: BingJiun Luo <luobingjiun@gmail.com>
To: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org
Subject: Fwd: [PATCH] ahci: enable pmp but connected to HDD issue fixed
Date: Wed, 15 Jun 2011 10:50:05 +0800 [thread overview]
Message-ID: <BANLkTin0CHX82s5t1cbqBUP_P1oBiQPCqA@mail.gmail.com> (raw)
In-Reply-To: <BANLkTimiJheFauWXjh-8GszGHoqMOa0Kkw@mail.gmail.com>
Since more than one controllers has software reset failed problem when PMP
enabled, I think it would be better to move ahci_sb600_softreset() from ahci.c
to libahci.c and rename it, let's say: ahci_pmpenable_softreset() .
(Just arbitrary
name, please someone may give a better function name)
Controller that has software reset problem when PMP enable may point its
softreset and pmp_softreset call back function of struct ata_port_operations to
ahci_pmpenable_softreset(). Regardless of PCI or Platform based AHCI controller.
(ahci.c or ahci_platform.c)
Regards,
BingJiun
On Tue, Jun 14, 2011 at 1:48 PM, Yuan-Hsin Chen <yuanlmm@gmail.com> wrote:
>
> From: Yuan-Hsin Chen <yhchen@faraday-tech.com>
>
> When enabling both port multiplier and platform ahci sata, ahci
> times out while connecting to HDD directly. This is because soft
> reset fails with IPMS set. Do soft reset again to port 0.
>
> The soft reset sequence is copied from ahci.c.
>
> Signed-off-by: Yuan-Hsin Chen <yhchen@faraday-tech.com>
> ---
> drivers/ata/ahci_platform.c | 62 ++++++++++++++++++++++++++++++++++++++++++-
> 1 files changed, 61 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
> index 6fef1fa..6eab716 100644
> --- a/drivers/ata/ahci_platform.c
> +++ b/drivers/ata/ahci_platform.c
> @@ -27,6 +27,66 @@ static struct scsi_host_template ahci_platform_sht = {
> AHCI_SHT("ahci_platform"),
> };
>
> +static int ahci_pmp_softreset(struct ata_link *link, unsigned int *class,
> + unsigned long deadline);
> +
> +static struct ata_port_operations ahci_pmp_ops = {
> + .inherits = &ahci_ops,
> + .softreset = ahci_pmp_softreset,
> + .pmp_softreset = ahci_pmp_softreset,
> +};
> +
> +static int ahci_pmp_check_ready(struct ata_link *link)
> +{
> + void __iomem *port_mmio = ahci_port_base(link->ap);
> + u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
> + u32 irq_status = readl(port_mmio + PORT_IRQ_STAT);
> +
> + /*
> + * There is no need to check TFDATA if BAD PMP is found due to HW bug,
> + * which can save timeout delay.
> + */
> + if (irq_status & PORT_IRQ_BAD_PMP)
> + return -EIO;
> +
> + printk("%s:TFT 0x%x\n", __func__, status);
> + return ata_check_ready(status);
> +}
> +
> +static int ahci_pmp_softreset(struct ata_link *link, unsigned int *class,
> + unsigned long deadline)
> +{
> + struct ata_port *ap = link->ap;
> + void __iomem *port_mmio = ahci_port_base(ap);
> + int pmp = sata_srst_pmp(link);
> + int rc;
> + u32 irq_sts;
> +
> + DPRINTK("ENTER\n");
> +
> + rc = ahci_do_softreset(link, class, pmp, deadline,
> + ahci_pmp_check_ready);
> +
> + /*
> + * Soft reset fails with IPMS set when PMP is enabled but
> + * SATA HDD/ODD is connected to SATA port, do soft reset
> + * again to port 0.
> + */
> + if (rc == -EIO) {
> + irq_sts = readl(port_mmio + PORT_IRQ_STAT);
> + if (irq_sts & PORT_IRQ_BAD_PMP) {
> + ata_link_printk(link, KERN_WARNING,
> + "applying PMP SRST workaround "
> + "and retrying\n");
> + rc = ahci_do_softreset(link, class, 0, deadline,
> + ahci_check_ready);
> + }
> + }
> +
> + return rc;
> +}
> +
> +
> static int __init ahci_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> @@ -35,7 +95,7 @@ static int __init ahci_probe(struct platform_device *pdev)
> .flags = AHCI_FLAG_COMMON,
> .pio_mask = ATA_PIO4,
> .udma_mask = ATA_UDMA6,
> - .port_ops = &ahci_ops,
> + .port_ops = &ahci_pmp_ops,
> };
> const struct ata_port_info *ppi[] = { &pi, NULL };
> struct ahci_host_priv *hpriv;
> --
> 1.7.3.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2011-06-15 2:50 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-14 5:48 Yuan-Hsin Chen
2011-06-14 6:52 ` Tejun Heo
2011-06-15 10:04 ` [PATCH v2] ahci: fix pmp softreset with HDD Yuan-Hsin Chen
2011-06-15 10:14 ` Tejun Heo
2011-06-17 10:39 ` [PATCH v3] ahci: move ahci_sb600_softreset to libahci.c and rename it Yuan-Hsin Chen
2011-06-17 11:34 ` Sergei Shtylyov
2011-06-17 12:07 ` Tejun Heo
2011-06-20 8:06 ` [PATCH v4] " Yuan-Hsin Chen
2011-06-20 8:15 ` Sergei Shtylyov
2011-06-20 8:47 ` Yuan-Hsin Chen
2011-06-20 8:19 ` Tejun Heo
2011-06-20 10:06 ` Yuan-Hsin Chen
2011-06-20 12:47 ` Tejun Heo
2011-06-21 3:24 ` Yuan-Hsin Chen
2011-06-21 7:17 ` Tejun Heo
2011-06-21 9:17 ` [PATCH v5] " Yuan-Hsin Chen
2011-06-21 9:53 ` Tejun Heo
[not found] ` <BANLkTimiJheFauWXjh-8GszGHoqMOa0Kkw@mail.gmail.com>
2011-06-15 2:50 ` BingJiun Luo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BANLkTin0CHX82s5t1cbqBUP_P1oBiQPCqA@mail.gmail.com \
--to=luobingjiun@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®