From: Jim Cromie <jim.cromie@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: gnb@fmeh.org, jbaron@redhat.com, bvanassche@acm.org,
gregkh@suse.de, Jim Cromie <jim.cromie@gmail.com>
Subject: [PATCH 05/11] dynamic_debug: use pr_info instead of printk(KERN_INFO ..
Date: Tue, 28 Jun 2011 01:09:46 -0600 [thread overview]
Message-ID: <1309244992-2305-6-git-send-email-jim.cromie@gmail.com> (raw)
In-Reply-To: <1309244992-2305-1-git-send-email-jim.cromie@gmail.com>
pr_info was already in use here, update most others.
Use pr_fmt to uniformly add __func__ to all calls.
A few printks were left alone, where line was left un-terminated,
and subsequent printks appended to it. These need separate attention.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
---
lib/dynamic_debug.c | 55 +++++++++++++++++++++++---------------------------
1 files changed, 25 insertions(+), 30 deletions(-)
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 2505232..17bace8 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -31,6 +31,9 @@
#include <linux/hardirq.h>
#include <linux/sched.h>
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
extern struct _ddebug __start___verbose[];
extern struct _ddebug __stop___verbose[];
@@ -160,8 +163,7 @@ static void ddebug_change(const struct ddebug_query *query,
else
dp->enabled = 0;
if (verbose)
- printk(KERN_INFO
- "ddebug: changed %s:%d [%s]%s %s\n",
+ pr_info("changed %s:%d [%s]%s %s\n",
dp->filename, dp->lineno,
dt->mod_name, dp->function,
ddebug_describe_flags(dp, flagbuf,
@@ -171,7 +173,7 @@ static void ddebug_change(const struct ddebug_query *query,
mutex_unlock(&ddebug_lock);
if (!nfound && verbose)
- printk(KERN_INFO "ddebug: no matches for query\n");
+ pr_info("no matches for query\n");
}
/*
@@ -349,9 +351,9 @@ static int ddebug_parse_query(char *words[], int nwords,
}
if (verbose)
- printk(KERN_INFO "%s: q->function=\"%s\" q->filename=\"%s\" "
+ pr_info("q->function=\"%s\" q->filename=\"%s\" "
"q->module=\"%s\" q->format=\"%s\" q->lineno=%u-%u\n",
- __func__, query->function, query->filename,
+ query->function, query->filename,
query->module, query->format, query->first_lineno,
query->last_lineno);
@@ -380,7 +382,7 @@ static int ddebug_parse_flags(const char *str, unsigned int *flagsp,
return -EINVAL;
}
if (verbose)
- printk(KERN_INFO "%s: op='%c'\n", __func__, op);
+ pr_info("op='%c'\n", op);
for ( ; *str ; ++str) {
for (i = ARRAY_SIZE(opt_array) - 1; i >= 0; i--) {
@@ -395,7 +397,7 @@ static int ddebug_parse_flags(const char *str, unsigned int *flagsp,
if (flags == 0)
return -EINVAL;
if (verbose)
- printk(KERN_INFO "%s: flags=0x%x\n", __func__, flags);
+ pr_info("flags=0x%x\n", flags);
/* calculate final *flagsp, *maskp according to mask and op */
switch (op) {
@@ -413,8 +415,8 @@ static int ddebug_parse_flags(const char *str, unsigned int *flagsp,
break;
}
if (verbose)
- printk(KERN_INFO "%s: *flagsp=0x%x *maskp=0x%x\n",
- __func__, *flagsp, *maskp);
+ pr_info("*flagsp=0x%x *maskp=0x%x\n", *flagsp, *maskp);
+
return 0;
}
@@ -457,8 +459,7 @@ static int ddebug_exec_queries(char *query)
*split++ = '\0';
if (verbose)
- printk(KERN_INFO "%s: query %d: \"%s\"",
- __func__, i, query);
+ pr_info("query %d: \"%s\"\n", i, query);
rc = ddebug_exec_query(query);
if (rc) {
@@ -467,9 +468,7 @@ static int ddebug_exec_queries(char *query)
}
}
if (verbose)
- printk(KERN_INFO
- "%s: processed %d queries, with %d errs",
- __func__, i, errs);
+ pr_info("processed %d queries, with %d errs", i, errs);
return exitcode;
}
@@ -507,7 +506,7 @@ static __initdata char ddebug_setup_string[1024];
static __init int ddebug_setup_query(char *str)
{
if (strlen(str) >= 1024) {
- pr_warning("ddebug boot param string too large\n");
+ pr_warning("boot param string too large\n");
return 0;
}
strcpy(ddebug_setup_string, str);
@@ -535,8 +534,7 @@ static ssize_t ddebug_proc_write(struct file *file, const char __user *ubuf,
return -EFAULT;
tmpbuf[len] = '\0';
if (verbose)
- printk(KERN_INFO "%s: read %d bytes from userspace\n",
- __func__, (int)len);
+ pr_info("read %d bytes from userspace\n", (int)len);
ret = ddebug_exec_queries(tmpbuf);
if (ret)
@@ -599,8 +597,8 @@ static void *ddebug_proc_start(struct seq_file *m, loff_t *pos)
int n = *pos;
if (verbose)
- printk(KERN_INFO "%s: called m=%p *pos=%lld\n",
- __func__, m, (unsigned long long)*pos);
+ pr_info("called m=%p *pos=%lld\n",
+ m, (unsigned long long)*pos);
mutex_lock(&ddebug_lock);
@@ -625,8 +623,8 @@ static void *ddebug_proc_next(struct seq_file *m, void *p, loff_t *pos)
struct _ddebug *dp;
if (verbose)
- printk(KERN_INFO "%s: called m=%p p=%p *pos=%lld\n",
- __func__, m, p, (unsigned long long)*pos);
+ pr_info("called m=%p p=%p *pos=%lld\n",
+ m, p, (unsigned long long)*pos);
if (p == SEQ_START_TOKEN)
dp = ddebug_iter_first(iter);
@@ -650,8 +648,7 @@ static int ddebug_proc_show(struct seq_file *m, void *p)
const int offset = strlen(__FILE__) - strlen("lib/dynamic_debug.c");
if (verbose)
- printk(KERN_INFO "%s: called m=%p p=%p\n",
- __func__, m, p);
+ pr_info("called m=%p p=%p\n", m, p);
if (p == SEQ_START_TOKEN) {
seq_puts(m,
@@ -676,8 +673,8 @@ static int ddebug_proc_show(struct seq_file *m, void *p)
static void ddebug_proc_stop(struct seq_file *m, void *p)
{
if (verbose)
- printk(KERN_INFO "%s: called m=%p p=%p\n",
- __func__, m, p);
+ pr_info("called m=%p p=%p\n", m, p);
+
mutex_unlock(&ddebug_lock);
}
@@ -700,7 +697,7 @@ static int ddebug_proc_open(struct inode *inode, struct file *file)
int err;
if (verbose)
- printk(KERN_INFO "%s: called\n", __func__);
+ pr_info("called\n");
iter = kzalloc(sizeof(*iter), GFP_KERNEL);
if (iter == NULL)
@@ -752,8 +749,7 @@ int ddebug_add_module(struct _ddebug *tab, unsigned int n,
mutex_unlock(&ddebug_lock);
if (verbose)
- printk(KERN_INFO "%u debug prints in module %s\n",
- n, dt->mod_name);
+ pr_info("%u debug prints in module %s\n", n, dt->mod_name);
return 0;
}
EXPORT_SYMBOL_GPL(ddebug_add_module);
@@ -775,8 +771,7 @@ int ddebug_remove_module(const char *mod_name)
int ret = -ENOENT;
if (verbose)
- printk(KERN_INFO "%s: removing module \"%s\"\n",
- __func__, mod_name);
+ pr_info("removing module \"%s\"\n", mod_name);
mutex_lock(&ddebug_lock);
list_for_each_entry_safe(dt, nextdt, &ddebug_tables, link) {
--
1.7.4.1
next prev parent reply other threads:[~2011-06-28 7:11 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-28 7:09 [PATCH 0/11] dynamic_debug: allow multiple pending queries on boot-line Jim Cromie
2011-06-28 7:09 ` [PATCH 01/11] dynamic_debug: allow changing of dynamic_debug verbosity any time Jim Cromie
2011-06-29 10:41 ` Bart Van Assche
2011-07-01 21:57 ` Greg KH
2011-07-02 8:39 ` Jim Cromie
2011-06-28 7:09 ` [PATCH 02/11] dynamic_debug: trim source-path prefix from dynamic_debug/control Jim Cromie
2011-06-28 10:08 ` Bart Van Assche
2011-06-28 18:29 ` Jim Cromie
2011-06-28 7:09 ` [PATCH 03/11] dynamic_debug: process multiple commands on a line Jim Cromie
2011-06-29 10:50 ` Bart Van Assche
2011-07-05 16:12 ` Jim Cromie
2011-06-28 7:09 ` [PATCH 04/11] dynamic_debug: warn when >1 of each type of match-spec is given Jim Cromie
2011-06-28 10:17 ` Bart Van Assche
2011-06-28 15:21 ` Jim Cromie
2011-06-28 7:09 ` Jim Cromie [this message]
2011-06-28 7:09 ` [PATCH 06/11] dynamic_debug: KERN_ERR should not depend upon verbosity Jim Cromie
2011-06-28 7:09 ` [PATCH 07/11] dynamic_debug: dont kill entire facility on error parsing ddebug_query Jim Cromie
2011-06-28 7:09 ` [PATCH 08/11] dynamic_debug: return int from ddebug_change Jim Cromie
2011-06-28 10:24 ` Bart Van Assche
2011-06-28 14:54 ` Jason Baron
2011-06-28 17:48 ` Bart Van Assche
2011-06-28 18:24 ` Jim Cromie
2011-06-28 7:09 ` [PATCH 09/11] dynamic_debug: add_to_pending() saves non-matching queries for later Jim Cromie
2011-06-28 14:48 ` Jason Baron
2011-07-03 8:27 ` Bart Van Assche
2011-06-28 19:17 ` Jim Cromie
2011-07-03 8:24 ` Bart Van Assche
2011-07-03 8:32 ` Bart Van Assche
2011-06-28 7:09 ` [PATCH 10/11] dynamic_debug: call apply_pending_queries from ddebug_add_module Jim Cromie
2011-07-03 8:37 ` Bart Van Assche
2011-06-28 7:09 ` [PATCH 11/11] dynamic_debug: document use of pendinq queries at boot-time Jim Cromie
2011-07-03 8:19 ` [PATCH 0/11] dynamic_debug: allow multiple pending queries on boot-line Bart Van Assche
2011-07-11 7:46 ` Jim Cromie
2011-07-11 7:46 ` [PATCH 01/21] dynamic_debug: add pending flag 'a' to make pending queries explicit Jim Cromie
2011-07-11 7:46 ` [PATCH 02/21] dynamic_debug: allow changing of dynamic_debug verbosity any time Jim Cromie
2011-07-11 7:46 ` [PATCH 03/21] dynamic_debug: process multiple commands on a line Jim Cromie
2011-07-12 5:54 ` Bart Van Assche
2011-07-13 7:25 ` Jim Cromie
2011-07-13 17:44 ` Bart Van Assche
2011-07-11 7:46 ` [PATCH 04/21] dynamic_debug: warn when >1 of each type of match-spec is given Jim Cromie
2011-07-11 7:46 ` [PATCH 05/21] dynamic_debug: pr_err() call should not depend upon verbosity Jim Cromie
2011-07-11 7:46 ` [PATCH 06/21] dynamic_debug: dont kill entire facility on error parsing ddebug_query Jim Cromie
2011-07-11 7:46 ` [PATCH 07/21] dynamic_debug: return int from ddebug_change Jim Cromie
2011-07-11 18:39 ` Bart Van Assche
2011-07-11 7:46 ` [PATCH 08/21] dynamic_debug: factor show_ddebug_query out of ddebug_parse_query Jim Cromie
2011-07-11 18:36 ` Bart Van Assche
2011-07-16 21:32 ` Jim Cromie
2011-07-25 11:10 ` Bart Van Assche
2011-07-25 13:56 ` Jim Cromie
2011-07-11 7:46 ` [PATCH 09/21] dynamic_debug: save_pending() saves non-matching queries for later Jim Cromie
2011-07-11 18:32 ` Bart Van Assche
2011-07-12 5:55 ` Bart Van Assche
2011-07-11 7:46 ` [PATCH 10/21] dynamic_debug: call apply_pending_queries from ddebug_add_module Jim Cromie
2011-07-11 7:46 ` [PATCH 11/21] dynamic_debug: refactor query_matches_callsite out of ddebug_change Jim Cromie
2011-07-11 7:46 ` [PATCH 12/21] dynamic_debug: document use of pending queries at boot-time Jim Cromie
2011-07-11 7:46 ` [PATCH 13/21] dynamic_debug: require 'a' flag to explicitly mark pending queries Jim Cromie
2011-07-12 9:20 ` Bart Van Assche
2011-07-11 7:46 ` [PATCH 14/21] dynamic_debug: hoist locking in ddebug_change to callers Jim Cromie
2011-07-11 7:46 ` [PATCH 15/21] dynamic_debug: describe_flags with '=[ptmfl]*' Jim Cromie
2011-07-11 7:46 ` [PATCH 16/21] dynamic_debug: define several levels of verbosity Jim Cromie
2011-07-11 7:46 ` [PATCH 17/21] dynamic_debug: non-optimization - remove != NULL Jim Cromie
2011-07-11 7:46 ` [PATCH 18/21] dynamic_debug: trim source-path prefix from dynamic_debug/control Jim Cromie
2011-07-11 7:46 ` [PATCH 19/21] dynamic_debug: add flags filtering to flags spec handling Jim Cromie
2011-07-11 7:46 ` [PATCH 20/21] dynamic_debug: clear pending_queries list in remove_all_tables Jim Cromie
2011-07-11 7:46 ` [PATCH 21/21] dynamic_debug: delete pending queries Jim Cromie
2011-07-11 10:49 ` Bart Van Assche
2011-07-11 13:43 ` Jim Cromie
2011-07-12 0:25 ` Joe Perches
2011-07-12 20:50 ` Jason Baron
2011-07-20 5:39 ` Jim Cromie
2011-07-20 17:43 ` Jim Cromie
2011-07-20 22:08 ` Joe Perches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1309244992-2305-6-git-send-email-jim.cromie@gmail.com \
--to=jim.cromie@gmail.com \
--cc=bvanassche@acm.org \
--cc=gnb@fmeh.org \
--cc=gregkh@suse.de \
--cc=jbaron@redhat.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®