mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jim Cromie <jim.cromie@gmail.com>
To: jbaron@redhat.com
Cc: linux-kernel@vger.kernel.org, bvanassche@acm.org,
	joe@perches.com, gregkh@suse.de, gnb@fmeh.org,
	Jim Cromie <jim.cromie@gmail.com>
Subject: [PATCH 11/21] dynamic_debug: refactor query_matches_callsite out of ddebug_change
Date: Mon, 11 Jul 2011 01:46:46 -0600	[thread overview]
Message-ID: <1310370416-6322-12-git-send-email-jim.cromie@gmail.com> (raw)
In-Reply-To: <1310370416-6322-1-git-send-email-jim.cromie@gmail.com>

this makes no behavioral change, its just a code-move.
Originally done cuz it looked momentarily to be related to
query-vs-query check needed soon.

If this function is reused, note that it excludes check of the module;
that is done once for the table, this code refactors the test inside
the loop over the module's ddebug callsites.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
---
 lib/dynamic_debug.c |   52 +++++++++++++++++++++++++++++---------------------
 1 files changed, 30 insertions(+), 22 deletions(-)

diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index cc8e157..bee1376 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -134,6 +134,35 @@ static char *show_pending_query(struct pending_query *pq)
 	return prbuf_query;
 }
 
+static int query_matches_callsite(struct _ddebug *dp,
+				const struct ddebug_query *query)
+{
+	/* match against the source filename */
+	if (query->filename != NULL &&
+		strcmp(query->filename, dp->filename) &&
+		strcmp(query->filename, basename(dp->filename)))
+		return 0;
+
+	/* match against the function */
+	if (query->function != NULL &&
+		strcmp(query->function, dp->function))
+		return 0;
+
+	/* match against the format */
+	if (query->format != NULL &&
+		strstr(dp->format, query->format) == NULL)
+		return 0;
+
+	/* match against the line number range */
+	if (query->first_lineno && dp->lineno < query->first_lineno)
+		return 0;
+
+	if (query->last_lineno && dp->lineno > query->last_lineno)
+		return 0;
+
+	return 1;
+}
+
 /*
  * Search the tables for _ddebug's which match the given
  * `query' and apply the `flags' and `mask' to them.  Tells
@@ -161,28 +190,7 @@ static int ddebug_change(const struct ddebug_query *query,
 		for (i = 0 ; i < dt->num_ddebugs ; i++) {
 			struct _ddebug *dp = &dt->ddebugs[i];
 
-			/* match against the source filename */
-			if (query->filename != NULL &&
-			    strcmp(query->filename, dp->filename) &&
-			    strcmp(query->filename, basename(dp->filename)))
-				continue;
-
-			/* match against the function */
-			if (query->function != NULL &&
-			    strcmp(query->function, dp->function))
-				continue;
-
-			/* match against the format */
-			if (query->format != NULL &&
-			    strstr(dp->format, query->format) == NULL)
-				continue;
-
-			/* match against the line number range */
-			if (query->first_lineno &&
-			    dp->lineno < query->first_lineno)
-				continue;
-			if (query->last_lineno &&
-			    dp->lineno > query->last_lineno)
+			if (!query_matches_callsite(dp, query))
 				continue;
 
 			nfound++;
-- 
1.7.4.1


  parent reply	other threads:[~2011-07-11  7:50 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-28  7:09 [PATCH 0/11] dynamic_debug: allow multiple pending queries on boot-line Jim Cromie
2011-06-28  7:09 ` [PATCH 01/11] dynamic_debug: allow changing of dynamic_debug verbosity any time Jim Cromie
2011-06-29 10:41   ` Bart Van Assche
2011-07-01 21:57     ` Greg KH
2011-07-02  8:39       ` Jim Cromie
2011-06-28  7:09 ` [PATCH 02/11] dynamic_debug: trim source-path prefix from dynamic_debug/control Jim Cromie
2011-06-28 10:08   ` Bart Van Assche
2011-06-28 18:29     ` Jim Cromie
2011-06-28  7:09 ` [PATCH 03/11] dynamic_debug: process multiple commands on a line Jim Cromie
2011-06-29 10:50   ` Bart Van Assche
2011-07-05 16:12     ` Jim Cromie
2011-06-28  7:09 ` [PATCH 04/11] dynamic_debug: warn when >1 of each type of match-spec is given Jim Cromie
2011-06-28 10:17   ` Bart Van Assche
2011-06-28 15:21     ` Jim Cromie
2011-06-28  7:09 ` [PATCH 05/11] dynamic_debug: use pr_info instead of printk(KERN_INFO Jim Cromie
2011-06-28  7:09 ` [PATCH 06/11] dynamic_debug: KERN_ERR should not depend upon verbosity Jim Cromie
2011-06-28  7:09 ` [PATCH 07/11] dynamic_debug: dont kill entire facility on error parsing ddebug_query Jim Cromie
2011-06-28  7:09 ` [PATCH 08/11] dynamic_debug: return int from ddebug_change Jim Cromie
2011-06-28 10:24   ` Bart Van Assche
2011-06-28 14:54     ` Jason Baron
2011-06-28 17:48       ` Bart Van Assche
2011-06-28 18:24         ` Jim Cromie
2011-06-28  7:09 ` [PATCH 09/11] dynamic_debug: add_to_pending() saves non-matching queries for later Jim Cromie
2011-06-28 14:48   ` Jason Baron
2011-07-03  8:27     ` Bart Van Assche
2011-06-28 19:17   ` Jim Cromie
2011-07-03  8:24     ` Bart Van Assche
2011-07-03  8:32   ` Bart Van Assche
2011-06-28  7:09 ` [PATCH 10/11] dynamic_debug: call apply_pending_queries from ddebug_add_module Jim Cromie
2011-07-03  8:37   ` Bart Van Assche
2011-06-28  7:09 ` [PATCH 11/11] dynamic_debug: document use of pendinq queries at boot-time Jim Cromie
2011-07-03  8:19 ` [PATCH 0/11] dynamic_debug: allow multiple pending queries on boot-line Bart Van Assche
2011-07-11  7:46 ` Jim Cromie
2011-07-11  7:46   ` [PATCH 01/21] dynamic_debug: add pending flag 'a' to make pending queries explicit Jim Cromie
2011-07-11  7:46   ` [PATCH 02/21] dynamic_debug: allow changing of dynamic_debug verbosity any time Jim Cromie
2011-07-11  7:46   ` [PATCH 03/21] dynamic_debug: process multiple commands on a line Jim Cromie
2011-07-12  5:54     ` Bart Van Assche
2011-07-13  7:25       ` Jim Cromie
2011-07-13 17:44         ` Bart Van Assche
2011-07-11  7:46   ` [PATCH 04/21] dynamic_debug: warn when >1 of each type of match-spec is given Jim Cromie
2011-07-11  7:46   ` [PATCH 05/21] dynamic_debug: pr_err() call should not depend upon verbosity Jim Cromie
2011-07-11  7:46   ` [PATCH 06/21] dynamic_debug: dont kill entire facility on error parsing ddebug_query Jim Cromie
2011-07-11  7:46   ` [PATCH 07/21] dynamic_debug: return int from ddebug_change Jim Cromie
2011-07-11 18:39     ` Bart Van Assche
2011-07-11  7:46   ` [PATCH 08/21] dynamic_debug: factor show_ddebug_query out of ddebug_parse_query Jim Cromie
2011-07-11 18:36     ` Bart Van Assche
2011-07-16 21:32       ` Jim Cromie
2011-07-25 11:10         ` Bart Van Assche
2011-07-25 13:56           ` Jim Cromie
2011-07-11  7:46   ` [PATCH 09/21] dynamic_debug: save_pending() saves non-matching queries for later Jim Cromie
2011-07-11 18:32     ` Bart Van Assche
2011-07-12  5:55     ` Bart Van Assche
2011-07-11  7:46   ` [PATCH 10/21] dynamic_debug: call apply_pending_queries from ddebug_add_module Jim Cromie
2011-07-11  7:46   ` Jim Cromie [this message]
2011-07-11  7:46   ` [PATCH 12/21] dynamic_debug: document use of pending queries at boot-time Jim Cromie
2011-07-11  7:46   ` [PATCH 13/21] dynamic_debug: require 'a' flag to explicitly mark pending queries Jim Cromie
2011-07-12  9:20     ` Bart Van Assche
2011-07-11  7:46   ` [PATCH 14/21] dynamic_debug: hoist locking in ddebug_change to callers Jim Cromie
2011-07-11  7:46   ` [PATCH 15/21] dynamic_debug: describe_flags with '=[ptmfl]*' Jim Cromie
2011-07-11  7:46   ` [PATCH 16/21] dynamic_debug: define several levels of verbosity Jim Cromie
2011-07-11  7:46   ` [PATCH 17/21] dynamic_debug: non-optimization - remove != NULL Jim Cromie
2011-07-11  7:46   ` [PATCH 18/21] dynamic_debug: trim source-path prefix from dynamic_debug/control Jim Cromie
2011-07-11  7:46   ` [PATCH 19/21] dynamic_debug: add flags filtering to flags spec handling Jim Cromie
2011-07-11  7:46   ` [PATCH 20/21] dynamic_debug: clear pending_queries list in remove_all_tables Jim Cromie
2011-07-11  7:46   ` [PATCH 21/21] dynamic_debug: delete pending queries Jim Cromie
2011-07-11 10:49     ` Bart Van Assche
2011-07-11 13:43       ` Jim Cromie
2011-07-12  0:25     ` Joe Perches
2011-07-12 20:50       ` Jason Baron
2011-07-20  5:39         ` Jim Cromie
2011-07-20 17:43       ` Jim Cromie
2011-07-20 22:08         ` Joe Perches

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1310370416-6322-12-git-send-email-jim.cromie@gmail.com \
    --to=jim.cromie@gmail.com \
    --cc=bvanassche@acm.org \
    --cc=gnb@fmeh.org \
    --cc=gregkh@suse.de \
    --cc=jbaron@redhat.com \
    --cc=joe@perches.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®