From: Jim Cromie <jim.cromie@gmail.com>
To: jbaron@redhat.com
Cc: linux-kernel@vger.kernel.org, bvanassche@acm.org,
joe@perches.com, gregkh@suse.de, gnb@fmeh.org,
Jim Cromie <jim.cromie@gmail.com>
Subject: [PATCH 19/21] dynamic_debug: add flags filtering to flags spec handling
Date: Mon, 11 Jul 2011 01:46:54 -0600 [thread overview]
Message-ID: <1310370416-6322-20-git-send-email-jim.cromie@gmail.com> (raw)
In-Reply-To: <1310370416-6322-1-git-send-email-jim.cromie@gmail.com>
Change definition of flags spec to [ptlmfa]*[-+=][ptlmfa]+
The flags preceding the op are optional filter-flags, if provided,
they add an additional constraint to call-site matching done
by ddebug_change; call-sites which do not have all specified flags
are skipped (additional flags are allowed).
This allows query/rules like "p+t" to turn on TID logging for all
currently enabled call-sites, while leaving the others alone.
This will also allow filtering on pending rules (with 'a' flag),
which will support removal of pending rules.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
---
lib/dynamic_debug.c | 81 +++++++++++++++++++++++++++++++-------------------
1 files changed, 50 insertions(+), 31 deletions(-)
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 44ccc02..9514071 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -174,7 +174,8 @@ static int query_matches_callsite(struct _ddebug *dp,
* were matched. Called with ddebug_lock held.
*/
static int ddebug_change(const struct ddebug_query *query,
- unsigned int flags, unsigned int mask)
+ unsigned int flags, unsigned int mask,
+ unsigned int filter)
{
int i;
struct ddebug_table *dt;
@@ -196,6 +197,9 @@ static int ddebug_change(const struct ddebug_query *query,
if (!query_matches_callsite(dp, query))
continue;
+ if (filter && (dp->flags & filter) != filter)
+ continue;
+
nfound++;
newflags = (dp->flags & mask) | flags;
@@ -396,29 +400,9 @@ static int ddebug_parse_query(char *words[], int nwords,
return 0;
}
-/*
- * Parse `str' as a flags specification, format [-+=][p]+.
- * Sets up *maskp and *flagsp to be used when changing the
- * flags fields of matched _ddebug's. Returns 0 on success
- * or <0 on error.
- */
-static int ddebug_parse_flags(const char *str, unsigned int *flagsp,
- unsigned int *maskp)
+static int ddebug_parse_flag_settings(const char *str)
{
- unsigned flags = 0;
- int op = '=', i;
-
- switch (*str) {
- case '+':
- case '-':
- case '=':
- op = *str++;
- break;
- default:
- return -EINVAL;
- }
- if (verbose)
- pr_info("op='%c'\n", op);
+ int i, flags = 0;
for ( ; *str ; ++str) {
for (i = ARRAY_SIZE(opt_array) - 1; i >= 0; i--) {
@@ -427,13 +411,49 @@ static int ddebug_parse_flags(const char *str, unsigned int *flagsp,
break;
}
}
- if (i < 0)
+ if (i < 0 && *str) {
+ pr_err("unknown flag: %c\n", *str);
return -EINVAL;
+ }
}
- if (flags == 0)
+ return flags;
+}
+
+/*
+ * Parse `str' as a flags filter and specification, with format
+ * [ptlmfa]*[-+=][ptlmfa]+. Sets up *maskp, *flagsp and *filterp to
+ * be used when changing the flags fields of matched _ddebug's.
+ * Returns 0 on success or <0 on error.
+ */
+static int ddebug_parse_flags(const char *str, unsigned int *flagsp,
+ unsigned int *maskp, unsigned int *filterp)
+{
+ int flags, filter;
+ int op = '=';
+ char *s = strpbrk(str, "+-=");
+
+ if (!s) {
+ pr_err("flags spec missing op, expecting [+-=]\n");
return -EINVAL;
+ } else {
+ op = *s;
+ *s++ = '\0';
+ }
+ filter = ddebug_parse_flag_settings(str);
+ if (filter < 0) {
+ pr_err("flags_filter=0x%x\n", filter);
+ return -EINVAL;
+ }
+ *filterp = filter;
+
+ flags = ddebug_parse_flag_settings(s);
+ if (flags <= 0) {
+ pr_err("flags=0x%x\n", flags);
+ return -EINVAL;
+ }
if (verbose)
- pr_info("flags=0x%x\n", flags);
+ pr_info(" flags_filter=0x%x\n op='%c'\n flags=0x%x\n",
+ filter, op, flags);
/* calculate final *flagsp, *maskp according to mask and op */
switch (op) {
@@ -526,7 +546,7 @@ static int ddebug_save_pending(struct ddebug_query *query,
static int ddebug_exec_query(char *query_string)
{
- unsigned int flags = 0, mask = 0;
+ unsigned int flags = 0, mask = 0, filter = 0;
struct ddebug_query query;
#define MAXWORDS 9
int nwords;
@@ -538,12 +558,12 @@ static int ddebug_exec_query(char *query_string)
return -EINVAL;
if (ddebug_parse_query(words, nwords-1, &query))
return -EINVAL;
- if (ddebug_parse_flags(words[nwords-1], &flags, &mask))
+ if (ddebug_parse_flags(words[nwords-1], &flags, &mask, &filter))
return -EINVAL;
/* actually go and implement the change */
mutex_lock(&ddebug_lock);
- nfound = ddebug_change(&query, flags, mask);
+ nfound = ddebug_change(&query, flags, mask, filter);
if (!nfound) {
if (flags & _DPRINTK_FLAGS_APPEND)
rc = ddebug_save_pending(&query, flags, mask);
@@ -921,8 +941,7 @@ static void apply_pending_queries(struct ddebug_table *dt)
pr_info("check: %s <-> %s\n",
dt->mod_name, show_pending_query(pq));
- nfound = ddebug_change(&pq->query, pq->flags, pq->mask);
-
+ nfound = ddebug_change(&pq->query, pq->flags, pq->mask, 0);
if (nfound) {
list_del(&pq->link);
kfree(pq);
--
1.7.4.1
next prev parent reply other threads:[~2011-07-11 7:48 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-28 7:09 [PATCH 0/11] dynamic_debug: allow multiple pending queries on boot-line Jim Cromie
2011-06-28 7:09 ` [PATCH 01/11] dynamic_debug: allow changing of dynamic_debug verbosity any time Jim Cromie
2011-06-29 10:41 ` Bart Van Assche
2011-07-01 21:57 ` Greg KH
2011-07-02 8:39 ` Jim Cromie
2011-06-28 7:09 ` [PATCH 02/11] dynamic_debug: trim source-path prefix from dynamic_debug/control Jim Cromie
2011-06-28 10:08 ` Bart Van Assche
2011-06-28 18:29 ` Jim Cromie
2011-06-28 7:09 ` [PATCH 03/11] dynamic_debug: process multiple commands on a line Jim Cromie
2011-06-29 10:50 ` Bart Van Assche
2011-07-05 16:12 ` Jim Cromie
2011-06-28 7:09 ` [PATCH 04/11] dynamic_debug: warn when >1 of each type of match-spec is given Jim Cromie
2011-06-28 10:17 ` Bart Van Assche
2011-06-28 15:21 ` Jim Cromie
2011-06-28 7:09 ` [PATCH 05/11] dynamic_debug: use pr_info instead of printk(KERN_INFO Jim Cromie
2011-06-28 7:09 ` [PATCH 06/11] dynamic_debug: KERN_ERR should not depend upon verbosity Jim Cromie
2011-06-28 7:09 ` [PATCH 07/11] dynamic_debug: dont kill entire facility on error parsing ddebug_query Jim Cromie
2011-06-28 7:09 ` [PATCH 08/11] dynamic_debug: return int from ddebug_change Jim Cromie
2011-06-28 10:24 ` Bart Van Assche
2011-06-28 14:54 ` Jason Baron
2011-06-28 17:48 ` Bart Van Assche
2011-06-28 18:24 ` Jim Cromie
2011-06-28 7:09 ` [PATCH 09/11] dynamic_debug: add_to_pending() saves non-matching queries for later Jim Cromie
2011-06-28 14:48 ` Jason Baron
2011-07-03 8:27 ` Bart Van Assche
2011-06-28 19:17 ` Jim Cromie
2011-07-03 8:24 ` Bart Van Assche
2011-07-03 8:32 ` Bart Van Assche
2011-06-28 7:09 ` [PATCH 10/11] dynamic_debug: call apply_pending_queries from ddebug_add_module Jim Cromie
2011-07-03 8:37 ` Bart Van Assche
2011-06-28 7:09 ` [PATCH 11/11] dynamic_debug: document use of pendinq queries at boot-time Jim Cromie
2011-07-03 8:19 ` [PATCH 0/11] dynamic_debug: allow multiple pending queries on boot-line Bart Van Assche
2011-07-11 7:46 ` Jim Cromie
2011-07-11 7:46 ` [PATCH 01/21] dynamic_debug: add pending flag 'a' to make pending queries explicit Jim Cromie
2011-07-11 7:46 ` [PATCH 02/21] dynamic_debug: allow changing of dynamic_debug verbosity any time Jim Cromie
2011-07-11 7:46 ` [PATCH 03/21] dynamic_debug: process multiple commands on a line Jim Cromie
2011-07-12 5:54 ` Bart Van Assche
2011-07-13 7:25 ` Jim Cromie
2011-07-13 17:44 ` Bart Van Assche
2011-07-11 7:46 ` [PATCH 04/21] dynamic_debug: warn when >1 of each type of match-spec is given Jim Cromie
2011-07-11 7:46 ` [PATCH 05/21] dynamic_debug: pr_err() call should not depend upon verbosity Jim Cromie
2011-07-11 7:46 ` [PATCH 06/21] dynamic_debug: dont kill entire facility on error parsing ddebug_query Jim Cromie
2011-07-11 7:46 ` [PATCH 07/21] dynamic_debug: return int from ddebug_change Jim Cromie
2011-07-11 18:39 ` Bart Van Assche
2011-07-11 7:46 ` [PATCH 08/21] dynamic_debug: factor show_ddebug_query out of ddebug_parse_query Jim Cromie
2011-07-11 18:36 ` Bart Van Assche
2011-07-16 21:32 ` Jim Cromie
2011-07-25 11:10 ` Bart Van Assche
2011-07-25 13:56 ` Jim Cromie
2011-07-11 7:46 ` [PATCH 09/21] dynamic_debug: save_pending() saves non-matching queries for later Jim Cromie
2011-07-11 18:32 ` Bart Van Assche
2011-07-12 5:55 ` Bart Van Assche
2011-07-11 7:46 ` [PATCH 10/21] dynamic_debug: call apply_pending_queries from ddebug_add_module Jim Cromie
2011-07-11 7:46 ` [PATCH 11/21] dynamic_debug: refactor query_matches_callsite out of ddebug_change Jim Cromie
2011-07-11 7:46 ` [PATCH 12/21] dynamic_debug: document use of pending queries at boot-time Jim Cromie
2011-07-11 7:46 ` [PATCH 13/21] dynamic_debug: require 'a' flag to explicitly mark pending queries Jim Cromie
2011-07-12 9:20 ` Bart Van Assche
2011-07-11 7:46 ` [PATCH 14/21] dynamic_debug: hoist locking in ddebug_change to callers Jim Cromie
2011-07-11 7:46 ` [PATCH 15/21] dynamic_debug: describe_flags with '=[ptmfl]*' Jim Cromie
2011-07-11 7:46 ` [PATCH 16/21] dynamic_debug: define several levels of verbosity Jim Cromie
2011-07-11 7:46 ` [PATCH 17/21] dynamic_debug: non-optimization - remove != NULL Jim Cromie
2011-07-11 7:46 ` [PATCH 18/21] dynamic_debug: trim source-path prefix from dynamic_debug/control Jim Cromie
2011-07-11 7:46 ` Jim Cromie [this message]
2011-07-11 7:46 ` [PATCH 20/21] dynamic_debug: clear pending_queries list in remove_all_tables Jim Cromie
2011-07-11 7:46 ` [PATCH 21/21] dynamic_debug: delete pending queries Jim Cromie
2011-07-11 10:49 ` Bart Van Assche
2011-07-11 13:43 ` Jim Cromie
2011-07-12 0:25 ` Joe Perches
2011-07-12 20:50 ` Jason Baron
2011-07-20 5:39 ` Jim Cromie
2011-07-20 17:43 ` Jim Cromie
2011-07-20 22:08 ` Joe Perches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1310370416-6322-20-git-send-email-jim.cromie@gmail.com \
--to=jim.cromie@gmail.com \
--cc=bvanassche@acm.org \
--cc=gnb@fmeh.org \
--cc=gregkh@suse.de \
--cc=jbaron@redhat.com \
--cc=joe@perches.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®