[PATCH 12/32 v4] USB: ohci: allow platform driver to specify the number of ports

[Florian Fainelli <florian@openwrt.org>]

This patch modifies the ohci platform driver to accept the num_ports
parameter to be set via platform_data. Setting the number of ports must be
done after the call to ohci_hcd_init().

Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
Changes in v4:
- rebased against greg's latest usb-next

Changes in v3:
- improved commit message

 drivers/usb/host/ohci-platform.c |    4 ++++
 include/linux/usb/ohci_pdriver.h |    2 ++
 2 files changed, 6 insertions(+)

diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index e24ec9f..1caaf65 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -31,6 +31,10 @@ static int ohci_platform_reset(struct usb_hcd *hcd)
 		ohci->flags |= OHCI_QUIRK_FRAME_NO;
 
 	ohci_hcd_init(ohci);
+
+	if (pdata->num_ports)
+		ohci->num_ports = pdata->num_ports;
+
 	err = ohci_init(ohci);
 
 	return err;
diff --git a/include/linux/usb/ohci_pdriver.h b/include/linux/usb/ohci_pdriver.h
index 74e7755..012f2b7 100644
--- a/include/linux/usb/ohci_pdriver.h
+++ b/include/linux/usb/ohci_pdriver.h
@@ -25,6 +25,7 @@
  * @big_endian_desc:	BE descriptors
  * @big_endian_mmio:	BE registers
  * @no_big_frame_no:	no big endian frame_no shift
+ * @num_ports:		number of ports
  *
  * These are general configuration options for the OHCI controller. All of
  * these options are activating more or less workarounds for some hardware.
@@ -33,6 +34,7 @@ struct usb_ohci_pdata {
 	unsigned	big_endian_desc:1;
 	unsigned	big_endian_mmio:1;
 	unsigned	no_big_frame_no:1;
+	unsigned int	num_ports;
 
 	/* Turn on all power and clocks */
 	int (*power_on)(struct platform_device *pdev);
-- 
1.7.9.5