From: Florian Fainelli <florian@openwrt.org>
To: stern@rowland.harvard.edu
Cc: linux-usb@vger.kernel.org, Florian Fainelli <florian@openwrt.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Hauke Mehrtens <hauke@hauke-m.de>, Felipe Balbi <balbi@ti.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 02/32 v2] USB: OHCI: remove ohci-pcc-soc driver.
Date: Mon, 8 Oct 2012 15:11:16 +0200 [thread overview]
Message-ID: <1349701906-16481-3-git-send-email-florian@openwrt.org> (raw)
In-Reply-To: <1349701906-16481-1-git-send-email-florian@openwrt.org>
This driver is not registered by any in-tree users, and if really needed by
some out of tree user, the same functionnality can be restored using the
ohci-platform driver using the following platform_data parameters:
big_endian_desc = 1
big_endian_mmio = 1
no_big_frame_no = 1
Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
Changes since v1:
- removed USB_OHCI_HCD_PPC_SOC Kconfig symbol
- rebased against greg's latest usb-next
drivers/usb/host/Kconfig | 10 --
drivers/usb/host/ohci-hcd.c | 5 -
drivers/usb/host/ohci-ppc-soc.c | 216 ---------------------------------------
3 files changed, 231 deletions(-)
delete mode 100644 drivers/usb/host/ohci-ppc-soc.c
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 3f1431d..e6b64f6 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -333,16 +333,6 @@ config USB_OHCI_ATH79
Enables support for the built-in OHCI controller present on the
Atheros AR71XX/AR7240 SoCs.
-config USB_OHCI_HCD_PPC_SOC
- bool "OHCI support for on-chip PPC USB controller"
- depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
- default y
- select USB_OHCI_BIG_ENDIAN_DESC
- select USB_OHCI_BIG_ENDIAN_MMIO
- ---help---
- Enables support for the USB controller on the MPC52xx or
- STB03xxx processor chip. If unsure, say Y.
-
config USB_OHCI_HCD_PPC_OF_BE
bool "OHCI support for OF platform bus (big endian)"
depends on USB_OHCI_HCD && PPC_OF
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 4a1d64d..fd97801 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1039,11 +1039,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ohci_hcd_pnx8550_driver
#endif
-#ifdef CONFIG_USB_OHCI_HCD_PPC_SOC
-#include "ohci-ppc-soc.c"
-#define PLATFORM_DRIVER ohci_hcd_ppc_soc_driver
-#endif
-
#ifdef CONFIG_ARCH_AT91
#include "ohci-at91.c"
#define PLATFORM_DRIVER ohci_hcd_at91_driver
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
deleted file mode 100644
index 185c39e..0000000
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- * (C) Copyright 2002 Hewlett-Packard Company
- * (C) Copyright 2003-2005 MontaVista Software Inc.
- *
- * Bus Glue for PPC On-Chip OHCI driver
- * Tested on Freescale MPC5200 and IBM STB04xxx
- *
- * Modified by Dale Farnsworth <dale@farnsworth.org> from ohci-sa1111.c
- *
- * This file is licenced under the GPL.
- */
-
-#include <linux/platform_device.h>
-#include <linux/signal.h>
-
-/* configure so an HC device and id are always provided */
-/* always called with process context; sleeping is OK */
-
-/**
- * usb_hcd_ppc_soc_probe - initialize On-Chip HCDs
- * Context: !in_interrupt()
- *
- * Allocates basic resources for this USB host controller.
- *
- * Store this function in the HCD's struct pci_driver as probe().
- */
-static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver,
- struct platform_device *pdev)
-{
- int retval;
- struct usb_hcd *hcd;
- struct ohci_hcd *ohci;
- struct resource *res;
- int irq;
-
- pr_debug("initializing PPC-SOC USB Controller\n");
-
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res) {
- pr_debug("%s: no irq\n", __FILE__);
- return -ENODEV;
- }
- irq = res->start;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- pr_debug("%s: no reg addr\n", __FILE__);
- return -ENODEV;
- }
-
- hcd = usb_create_hcd(driver, &pdev->dev, "PPC-SOC USB");
- if (!hcd)
- return -ENOMEM;
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = resource_size(res);
-
- if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
- pr_debug("%s: request_mem_region failed\n", __FILE__);
- retval = -EBUSY;
- goto err1;
- }
-
- hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
- if (!hcd->regs) {
- pr_debug("%s: ioremap failed\n", __FILE__);
- retval = -ENOMEM;
- goto err2;
- }
-
- ohci = hcd_to_ohci(hcd);
- ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
-
-#ifdef CONFIG_PPC_MPC52xx
- /* MPC52xx doesn't need frame_no shift */
- ohci->flags |= OHCI_QUIRK_FRAME_NO;
-#endif
- ohci_hcd_init(ohci);
-
- retval = usb_add_hcd(hcd, irq, 0);
- if (retval == 0)
- return retval;
-
- pr_debug("Removing PPC-SOC USB Controller\n");
-
- iounmap(hcd->regs);
- err2:
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- err1:
- usb_put_hcd(hcd);
- return retval;
-}
-
-
-/* may be called without controller electrically present */
-/* may be called with controller, bus, and devices active */
-
-/**
- * usb_hcd_ppc_soc_remove - shutdown processing for On-Chip HCDs
- * @pdev: USB Host Controller being removed
- * Context: !in_interrupt()
- *
- * Reverses the effect of usb_hcd_ppc_soc_probe().
- * It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
- *
- */
-static void usb_hcd_ppc_soc_remove(struct usb_hcd *hcd,
- struct platform_device *pdev)
-{
- usb_remove_hcd(hcd);
-
- pr_debug("stopping PPC-SOC USB Controller\n");
-
- iounmap(hcd->regs);
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- usb_put_hcd(hcd);
-}
-
-static int __devinit
-ohci_ppc_soc_start(struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci(hcd);
- int ret;
-
- if ((ret = ohci_init(ohci)) < 0)
- return ret;
-
- if ((ret = ohci_run(ohci)) < 0) {
- dev_err(hcd->self.controller, "can't start %s\n",
- hcd->self.bus_name);
- ohci_stop(hcd);
- return ret;
- }
-
- return 0;
-}
-
-static const struct hc_driver ohci_ppc_soc_hc_driver = {
- .description = hcd_name,
- .hcd_priv_size = sizeof(struct ohci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ohci_irq,
- .flags = HCD_USB11 | HCD_MEMORY,
-
- /*
- * basic lifecycle operations
- */
- .start = ohci_ppc_soc_start,
- .stop = ohci_stop,
- .shutdown = ohci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ohci_urb_enqueue,
- .urb_dequeue = ohci_urb_dequeue,
- .endpoint_disable = ohci_endpoint_disable,
-
- /*
- * scheduling support
- */
- .get_frame_number = ohci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
-#ifdef CONFIG_PM
- .bus_suspend = ohci_bus_suspend,
- .bus_resume = ohci_bus_resume,
-#endif
- .start_port_reset = ohci_start_port_reset,
-};
-
-static int ohci_hcd_ppc_soc_drv_probe(struct platform_device *pdev)
-{
- int ret;
-
- if (usb_disabled())
- return -ENODEV;
-
- ret = usb_hcd_ppc_soc_probe(&ohci_ppc_soc_hc_driver, pdev);
- return ret;
-}
-
-static int ohci_hcd_ppc_soc_drv_remove(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
- usb_hcd_ppc_soc_remove(hcd, pdev);
- return 0;
-}
-
-static struct platform_driver ohci_hcd_ppc_soc_driver = {
- .probe = ohci_hcd_ppc_soc_drv_probe,
- .remove = ohci_hcd_ppc_soc_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
-#ifdef CONFIG_PM
- /*.suspend = ohci_hcd_ppc_soc_drv_suspend,*/
- /*.resume = ohci_hcd_ppc_soc_drv_resume,*/
-#endif
- .driver = {
- .name = "ppc-soc-ohci",
- .owner = THIS_MODULE,
- },
-};
-
-MODULE_ALIAS("platform:ppc-soc-ohci");
--
1.7.9.5
next prev parent reply other threads:[~2012-10-08 13:13 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1349701906-16481-1-git-send-email-florian@openwrt.org>
2012-10-08 13:11 ` [PATCH 01/32 v4] USB: EHCI: remove IXP4xx EHCI driver Florian Fainelli
2012-10-08 13:11 ` Florian Fainelli [this message]
2012-10-08 13:11 ` [PATCH 03/32 v4] MIPS: Loongson 1B: use ehci-platform instead of ehci-ls1x Florian Fainelli
[not found] ` <CAJhJPsV5mFmOgU38ZpnYqUTNuOPmvRXjsf31XdFUqNOzsd_Edg@mail.gmail.com>
2012-10-23 8:46 ` Florian Fainelli
2012-10-23 8:53 ` Florian Fainelli
2012-10-08 13:11 ` [PATCH 04/32 v4] USB: EHCI: remove Loongson 1B EHCI driver Florian Fainelli
2012-10-08 13:11 ` [PATCH 05/32 v4] MIPS: Netlogic: use ehci-platform driver Florian Fainelli
2012-10-08 14:06 ` Jayachandran C.
2012-10-08 13:11 ` [PATCH 06/32 v4] USB: EHCI: remove Netlogic XLS EHCI driver Florian Fainelli
2012-10-08 13:11 ` [PATCH 07/32 v4] USB: EHCI: add no_io_watchdog platform_data parameter to ehci-platform Florian Fainelli
2012-10-08 13:11 ` [PATCH 08/32 v4] MIPS: Alchemy: use the ehci platform driver Florian Fainelli
2012-10-22 18:19 ` Greg KH
2012-10-08 13:11 ` [PATCH 09/32 v4] USB: EHCI: remove Alchemy EHCI driver Florian Fainelli
2012-10-08 13:11 ` [PATCH 10/32 v4] ARM: cns3xxx: use ehci platform driver Florian Fainelli
2012-10-08 13:11 ` [PATCH 11/32 v4] USB: EHCI: remove CNS3xxx EHCI " Florian Fainelli
2012-10-08 13:11 ` [PATCH 12/32 v4] USB: ohci: allow platform driver to specify the number of ports Florian Fainelli
2012-10-08 13:11 ` [PATCH 13/32 v3] USB: ohci: move ohci_pci_{suspend,resume} to ohci-hcd.c Florian Fainelli
2012-10-08 13:11 ` [PATCH 14/32 v3] USB: ohci: remove check for RH already suspended in ohci_suspend Florian Fainelli
2012-10-08 13:11 ` [PATCH 15/32 v3] USB: ohci: merge ohci_finish_controller_resume with ohci_resume Florian Fainelli
2012-10-08 13:11 ` [PATCH 16/32 v4] MIPS: PNX8550: use OHCI platform driver Florian Fainelli
2012-10-08 13:11 ` [PATCH 17/32 v4] USB: OHCI: remove PNX8550 OHCI driver Florian Fainelli
2012-10-08 13:11 ` [PATCH 18/32 v4] ARM: cns3xxx: use OHCI platform driver Florian Fainelli
2012-10-08 13:11 ` [PATCH 19/32 v4] USB: OHCI: remove CNS3xxx " Florian Fainelli
2012-10-08 13:11 ` [PATCH 20/32 v4] MIPS: Netlogic: convert to use " Florian Fainelli
2012-10-08 13:11 ` [PATCH 21/32 v4] USB: OHCI: remove Netlogic XLS " Florian Fainelli
2012-10-08 13:11 ` [PATCH 22/32 v4] sh: convert boards to use the " Florian Fainelli
2012-10-08 13:11 ` [PATCH 23/32 v4] USB: OHCI: remove OHCI SH " Florian Fainelli
2012-10-08 13:11 ` [PATCH 24/32 v4] MIPS: Alchemy: use the OHCI " Florian Fainelli
2012-10-22 18:27 ` Greg KH
2012-10-08 13:11 ` [PATCH 25/32 v4] USB: OHCI: remove Alchemy " Florian Fainelli
2012-10-08 13:11 ` [PATCH 26/32 v2] USB: move common alchemy USB routines to arch/mips/alchemy/common.c Florian Fainelli
2012-10-08 13:11 ` [PATCH 27/32 v2] USB: EHCI: make ehci-platform use dev_err() instead of pr_err() Florian Fainelli
2012-10-08 13:11 ` [PATCH 28/32 v2] USB: OHCI: make ohci-platform " Florian Fainelli
2012-10-08 13:11 ` [PATCH 29/32 v2] USB: EHCI: fix typo in ehci-platform driver on the word "resource" Florian Fainelli
2012-10-08 13:11 ` [PATCH 30/32 v2] USB: OHCI: fix typo in ohci-platform " Florian Fainelli
2012-10-08 13:11 ` [PATCH 31/32 v3] USB: EHCI: make ehci-platform use devm_request_and_ioremap helper Florian Fainelli
2012-10-08 13:11 ` [PATCH 32/32 v3] USB: OHCI: make ohci-platform " Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349701906-16481-3-git-send-email-florian@openwrt.org \
--to=florian@openwrt.org \
--cc=balbi@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=hauke@hauke-m.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome