mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Florian Fainelli <florian@openwrt.org>
To: stern@rowland.harvard.edu
Cc: linux-usb@vger.kernel.org, Florian Fainelli <florian@openwrt.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 25/32 v4] USB: OHCI: remove Alchemy OHCI platform driver.
Date: Mon,  8 Oct 2012 15:11:39 +0200	[thread overview]
Message-ID: <1349701906-16481-26-git-send-email-florian@openwrt.org> (raw)
In-Reply-To: <1349701906-16481-1-git-send-email-florian@openwrt.org>

All users have been converted to use the OHCI platform driver instead, thus
making ohci-au1xxx obsolete, remove it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
Changes in v4:
- rebased against greg's latest usb-next

No changes in v3

Changes in v2:
- rebased on top of the latest OHCI HCD changes

 drivers/usb/host/ohci-au1xxx.c |  234 ----------------------------------------
 drivers/usb/host/ohci-hcd.c    |    5 -
 2 files changed, 239 deletions(-)
 delete mode 100644 drivers/usb/host/ohci-au1xxx.c

diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
deleted file mode 100644
index c611699..0000000
--- a/drivers/usb/host/ohci-au1xxx.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- * (C) Copyright 2002 Hewlett-Packard Company
- *
- * Bus Glue for AMD Alchemy Au1xxx
- *
- * Written by Christopher Hoover <ch@hpl.hp.com>
- * Based on fragments of previous driver by Russell King et al.
- *
- * Modified for LH7A404 from ohci-sa1111.c
- *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
- * Modified for AMD Alchemy Au1xxx
- *  by Matt Porter <mporter@kernel.crashing.org>
- *
- * This file is licenced under the GPL.
- */
-
-#include <linux/platform_device.h>
-#include <linux/signal.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-
-extern int usb_disabled(void);
-
-static int __devinit ohci_au1xxx_start(struct usb_hcd *hcd)
-{
-	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
-	int ret;
-
-	ohci_dbg(ohci, "ohci_au1xxx_start, ohci:%p", ohci);
-
-	if ((ret = ohci_init(ohci)) < 0)
-		return ret;
-
-	if ((ret = ohci_run(ohci)) < 0) {
-		dev_err(hcd->self.controller, "can't start %s",
-			hcd->self.bus_name);
-		ohci_stop(hcd);
-		return ret;
-	}
-
-	return 0;
-}
-
-static const struct hc_driver ohci_au1xxx_hc_driver = {
-	.description =		hcd_name,
-	.product_desc =		"Au1xxx OHCI",
-	.hcd_priv_size =	sizeof(struct ohci_hcd),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq =			ohci_irq,
-	.flags =		HCD_USB11 | HCD_MEMORY,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.start =		ohci_au1xxx_start,
-	.stop =			ohci_stop,
-	.shutdown =		ohci_shutdown,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue =		ohci_urb_enqueue,
-	.urb_dequeue =		ohci_urb_dequeue,
-	.endpoint_disable =	ohci_endpoint_disable,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number =	ohci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data =	ohci_hub_status_data,
-	.hub_control =		ohci_hub_control,
-#ifdef	CONFIG_PM
-	.bus_suspend =		ohci_bus_suspend,
-	.bus_resume =		ohci_bus_resume,
-#endif
-	.start_port_reset =	ohci_start_port_reset,
-};
-
-static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
-{
-	int ret, unit;
-	struct usb_hcd *hcd;
-
-	if (usb_disabled())
-		return -ENODEV;
-
-	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
-		pr_debug("resource[1] is not IORESOURCE_IRQ\n");
-		return -ENOMEM;
-	}
-
-	hcd = usb_create_hcd(&ohci_au1xxx_hc_driver, &pdev->dev, "au1xxx");
-	if (!hcd)
-		return -ENOMEM;
-
-	hcd->rsrc_start = pdev->resource[0].start;
-	hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
-
-	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-		pr_debug("request_mem_region failed\n");
-		ret = -EBUSY;
-		goto err1;
-	}
-
-	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-	if (!hcd->regs) {
-		pr_debug("ioremap failed\n");
-		ret = -ENOMEM;
-		goto err2;
-	}
-
-	unit = (hcd->rsrc_start == AU1300_USB_OHCI1_PHYS_ADDR) ?
-			ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
-	if (alchemy_usb_control(unit, 1)) {
-		printk(KERN_INFO "%s: controller init failed!\n", pdev->name);
-		ret = -ENODEV;
-		goto err3;
-	}
-
-	ohci_hcd_init(hcd_to_ohci(hcd));
-
-	ret = usb_add_hcd(hcd, pdev->resource[1].start,
-			  IRQF_SHARED);
-	if (ret == 0) {
-		platform_set_drvdata(pdev, hcd);
-		return ret;
-	}
-
-	alchemy_usb_control(unit, 0);
-err3:
-	iounmap(hcd->regs);
-err2:
-	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-err1:
-	usb_put_hcd(hcd);
-	return ret;
-}
-
-static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-	int unit;
-
-	unit = (hcd->rsrc_start == AU1300_USB_OHCI1_PHYS_ADDR) ?
-			ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
-	usb_remove_hcd(hcd);
-	alchemy_usb_control(unit, 0);
-	iounmap(hcd->regs);
-	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-	usb_put_hcd(hcd);
-	platform_set_drvdata(pdev, NULL);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int ohci_hcd_au1xxx_drv_suspend(struct device *dev)
-{
-	struct usb_hcd *hcd = dev_get_drvdata(dev);
-	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
-	unsigned long flags;
-	int rc;
-
-	rc = 0;
-
-	/* Root hub was already suspended. Disable irq emission and
-	 * mark HW unaccessible, bail out if RH has been resumed. Use
-	 * the spinlock to properly synchronize with possible pending
-	 * RH suspend or resume activity.
-	 */
-	spin_lock_irqsave(&ohci->lock, flags);
-	if (ohci->rh_state != OHCI_RH_SUSPENDED) {
-		rc = -EINVAL;
-		goto bail;
-	}
-	ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
-	(void)ohci_readl(ohci, &ohci->regs->intrdisable);
-
-	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-
-	alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
-bail:
-	spin_unlock_irqrestore(&ohci->lock, flags);
-
-	return rc;
-}
-
-static int ohci_hcd_au1xxx_drv_resume(struct device *dev)
-{
-	struct usb_hcd *hcd = dev_get_drvdata(dev);
-
-	alchemy_usb_control(ALCHEMY_USB_OHCI0, 1);
-
-	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-	ohci_finish_controller_resume(hcd);
-
-	return 0;
-}
-
-static const struct dev_pm_ops au1xxx_ohci_pmops = {
-	.suspend	= ohci_hcd_au1xxx_drv_suspend,
-	.resume		= ohci_hcd_au1xxx_drv_resume,
-};
-
-#define AU1XXX_OHCI_PMOPS &au1xxx_ohci_pmops
-
-#else
-#define AU1XXX_OHCI_PMOPS NULL
-#endif
-
-static struct platform_driver ohci_hcd_au1xxx_driver = {
-	.probe		= ohci_hcd_au1xxx_drv_probe,
-	.remove		= ohci_hcd_au1xxx_drv_remove,
-	.shutdown	= usb_hcd_platform_shutdown,
-	.driver		= {
-		.name	= "au1xxx-ohci",
-		.owner	= THIS_MODULE,
-		.pm	= AU1XXX_OHCI_PMOPS,
-	},
-};
-
-MODULE_ALIAS("platform:au1xxx-ohci");
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index c791ecd..a2470ff 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1102,11 +1102,6 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ohci_hcd_ep93xx_driver
 #endif
 
-#ifdef CONFIG_MIPS_ALCHEMY
-#include "ohci-au1xxx.c"
-#define PLATFORM_DRIVER		ohci_hcd_au1xxx_driver
-#endif
-
 #ifdef CONFIG_ARCH_AT91
 #include "ohci-at91.c"
 #define PLATFORM_DRIVER		ohci_hcd_at91_driver
-- 
1.7.9.5


  parent reply	other threads:[~2012-10-08 13:14 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1349701906-16481-1-git-send-email-florian@openwrt.org>
2012-10-08 13:11 ` [PATCH 01/32 v4] USB: EHCI: remove IXP4xx EHCI driver Florian Fainelli
2012-10-08 13:11 ` [PATCH 02/32 v2] USB: OHCI: remove ohci-pcc-soc driver Florian Fainelli
2012-10-08 13:11 ` [PATCH 03/32 v4] MIPS: Loongson 1B: use ehci-platform instead of ehci-ls1x Florian Fainelli
     [not found]   ` <CAJhJPsV5mFmOgU38ZpnYqUTNuOPmvRXjsf31XdFUqNOzsd_Edg@mail.gmail.com>
2012-10-23  8:46     ` Florian Fainelli
2012-10-23  8:53       ` Florian Fainelli
2012-10-08 13:11 ` [PATCH 04/32 v4] USB: EHCI: remove Loongson 1B EHCI driver Florian Fainelli
2012-10-08 13:11 ` [PATCH 05/32 v4] MIPS: Netlogic: use ehci-platform driver Florian Fainelli
2012-10-08 14:06   ` Jayachandran C.
2012-10-08 13:11 ` [PATCH 06/32 v4] USB: EHCI: remove Netlogic XLS EHCI driver Florian Fainelli
2012-10-08 13:11 ` [PATCH 07/32 v4] USB: EHCI: add no_io_watchdog platform_data parameter to ehci-platform Florian Fainelli
2012-10-08 13:11 ` [PATCH 08/32 v4] MIPS: Alchemy: use the ehci platform driver Florian Fainelli
2012-10-22 18:19   ` Greg KH
2012-10-08 13:11 ` [PATCH 09/32 v4] USB: EHCI: remove Alchemy EHCI driver Florian Fainelli
2012-10-08 13:11 ` [PATCH 10/32 v4] ARM: cns3xxx: use ehci platform driver Florian Fainelli
2012-10-08 13:11 ` [PATCH 11/32 v4] USB: EHCI: remove CNS3xxx EHCI " Florian Fainelli
2012-10-08 13:11 ` [PATCH 12/32 v4] USB: ohci: allow platform driver to specify the number of ports Florian Fainelli
2012-10-08 13:11 ` [PATCH 13/32 v3] USB: ohci: move ohci_pci_{suspend,resume} to ohci-hcd.c Florian Fainelli
2012-10-08 13:11 ` [PATCH 14/32 v3] USB: ohci: remove check for RH already suspended in ohci_suspend Florian Fainelli
2012-10-08 13:11 ` [PATCH 15/32 v3] USB: ohci: merge ohci_finish_controller_resume with ohci_resume Florian Fainelli
2012-10-08 13:11 ` [PATCH 16/32 v4] MIPS: PNX8550: use OHCI platform driver Florian Fainelli
2012-10-08 13:11 ` [PATCH 17/32 v4] USB: OHCI: remove PNX8550 OHCI driver Florian Fainelli
2012-10-08 13:11 ` [PATCH 18/32 v4] ARM: cns3xxx: use OHCI platform driver Florian Fainelli
2012-10-08 13:11 ` [PATCH 19/32 v4] USB: OHCI: remove CNS3xxx " Florian Fainelli
2012-10-08 13:11 ` [PATCH 20/32 v4] MIPS: Netlogic: convert to use " Florian Fainelli
2012-10-08 13:11 ` [PATCH 21/32 v4] USB: OHCI: remove Netlogic XLS " Florian Fainelli
2012-10-08 13:11 ` [PATCH 22/32 v4] sh: convert boards to use the " Florian Fainelli
2012-10-08 13:11 ` [PATCH 23/32 v4] USB: OHCI: remove OHCI SH " Florian Fainelli
2012-10-08 13:11 ` [PATCH 24/32 v4] MIPS: Alchemy: use the OHCI " Florian Fainelli
2012-10-22 18:27   ` Greg KH
2012-10-08 13:11 ` Florian Fainelli [this message]
2012-10-08 13:11 ` [PATCH 26/32 v2] USB: move common alchemy USB routines to arch/mips/alchemy/common.c Florian Fainelli
2012-10-08 13:11 ` [PATCH 27/32 v2] USB: EHCI: make ehci-platform use dev_err() instead of pr_err() Florian Fainelli
2012-10-08 13:11 ` [PATCH 28/32 v2] USB: OHCI: make ohci-platform " Florian Fainelli
2012-10-08 13:11 ` [PATCH 29/32 v2] USB: EHCI: fix typo in ehci-platform driver on the word "resource" Florian Fainelli
2012-10-08 13:11 ` [PATCH 30/32 v2] USB: OHCI: fix typo in ohci-platform " Florian Fainelli
2012-10-08 13:11 ` [PATCH 31/32 v3] USB: EHCI: make ehci-platform use devm_request_and_ioremap helper Florian Fainelli
2012-10-08 13:11 ` [PATCH 32/32 v3] USB: OHCI: make ohci-platform " Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1349701906-16481-26-git-send-email-florian@openwrt.org \
    --to=florian@openwrt.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome