mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: linux-kernel@vger.kernel.org, broonie@opensource.wolfsonmicro.com
Cc: Bengt Jonsson <bengt.g.jonsson@stericsson.com>,
	Lee Jones <lee.jones@linaro.org>
Subject: [PATCH 10/73] regulator: ab8500: Added more configurable bits
Date: Mon,  4 Feb 2013 11:53:25 +0000	[thread overview]
Message-ID: <1359978868-28736-11-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1359978868-28736-1-git-send-email-lee.jones@linaro.org>

From: Bengt Jonsson <bengt.g.jonsson@stericsson.com>

Update the comments for the existing regulator initialisation
registers and provide some more configuration options, taken from
the datasheet.

Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
---
 drivers/regulator/ab8500.c       |  116 +++++++++++++++++++++++++++++---------
 include/linux/regulator/ab8500.h |   24 +++++---
 2 files changed, 103 insertions(+), 37 deletions(-)

diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 7b7dd20..0c4a871 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -614,11 +614,19 @@ struct ab8500_reg_init {
 
 static struct ab8500_reg_init ab8500_reg_init[] = {
 	/*
-	 * 0x30, VanaRequestCtrl
+	 * 0x03, VarmRequestCtrl
+	 * 0x0c, VapeRequestCtrl
+	 * 0x30, Vsmps1RequestCtrl
+	 * 0xc0, Vsmps2RequestCtrl
+	 */
+	REG_INIT(AB8500_REGUREQUESTCTRL1,	0x03, 0x03, 0xff),
+	/*
+	 * 0x03, Vsmps3RequestCtrl
 	 * 0x0c, VpllRequestCtrl
+	 * 0x30, VanaRequestCtrl
 	 * 0xc0, VextSupply1RequestCtrl
 	 */
-	REG_INIT(AB8500_REGUREQUESTCTRL2,	0x03, 0x04, 0xfc),
+	REG_INIT(AB8500_REGUREQUESTCTRL2,	0x03, 0x04, 0xff),
 	/*
 	 * 0x03, VextSupply2RequestCtrl
 	 * 0x0c, VextSupply3RequestCtrl
@@ -643,50 +651,71 @@ static struct ab8500_reg_init ab8500_reg_init[] = {
 	 */
 	REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID1,	0x03, 0x07, 0xff),
 	/*
+	 * 0x01, VapeSysClkReq1HPValid
+	 * 0x02, VarmSysClkReq1HPValid
+	 * 0x04, VbbSysClkReq1HPValid
+	 * 0x08, VmodSysClkReq1HPValid
 	 * 0x10, VextSupply1SysClkReq1HPValid
 	 * 0x20, VextSupply2SysClkReq1HPValid
 	 * 0x40, VextSupply3SysClkReq1HPValid
 	 */
-	REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID2,	0x03, 0x08, 0x70),
+	REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID2,	0x03, 0x08, 0x7f),
 	/*
+	 * 0x01, Vsmps1HwHPReq1Valid
+	 * 0x02, Vsmps2HwHPReq1Valid
+	 * 0x04, Vsmps3HwHPReq1Valid
 	 * 0x08, VanaHwHPReq1Valid
+	 * 0x10, VpllHwHPReq1Valid
 	 * 0x20, Vaux1HwHPReq1Valid
 	 * 0x40, Vaux2HwHPReq1Valid
 	 * 0x80, Vaux3HwHPReq1Valid
 	 */
-	REG_INIT(AB8500_REGUHWHPREQ1VALID1,	0x03, 0x09, 0xe8),
+	REG_INIT(AB8500_REGUHWHPREQ1VALID1,	0x03, 0x09, 0xff),
 	/*
 	 * 0x01, VextSupply1HwHPReq1Valid
 	 * 0x02, VextSupply2HwHPReq1Valid
 	 * 0x04, VextSupply3HwHPReq1Valid
+	 * 0x08, VmodHwHPReq1Valid
 	 */
-	REG_INIT(AB8500_REGUHWHPREQ1VALID2,	0x03, 0x0a, 0x07),
+	REG_INIT(AB8500_REGUHWHPREQ1VALID2,	0x03, 0x0a, 0x0f),
 	/*
+	 * 0x01, Vsmps1HwHPReq2Valid
+	 * 0x02, Vsmps2HwHPReq2Valid
+	 * 0x03, Vsmps3HwHPReq2Valid
 	 * 0x08, VanaHwHPReq2Valid
+	 * 0x10, VpllHwHPReq2Valid
 	 * 0x20, Vaux1HwHPReq2Valid
 	 * 0x40, Vaux2HwHPReq2Valid
 	 * 0x80, Vaux3HwHPReq2Valid
 	 */
-	REG_INIT(AB8500_REGUHWHPREQ2VALID1,	0x03, 0x0b, 0xe8),
+	REG_INIT(AB8500_REGUHWHPREQ2VALID1,	0x03, 0x0b, 0xff),
 	/*
 	 * 0x01, VextSupply1HwHPReq2Valid
 	 * 0x02, VextSupply2HwHPReq2Valid
 	 * 0x04, VextSupply3HwHPReq2Valid
+	 * 0x08, VmodHwHPReq2Valid
 	 */
-	REG_INIT(AB8500_REGUHWHPREQ2VALID2,	0x03, 0x0c, 0x07),
+	REG_INIT(AB8500_REGUHWHPREQ2VALID2,	0x03, 0x0c, 0x0f),
 	/*
+	 * 0x01, VapeSwHPReqValid
+	 * 0x02, VarmSwHPReqValid
+	 * 0x04, Vsmps1SwHPReqValid
+	 * 0x08, Vsmps2SwHPReqValid
+	 * 0x10, Vsmps3SwHPReqValid
 	 * 0x20, VanaSwHPReqValid
+	 * 0x40, VpllSwHPReqValid
 	 * 0x80, Vaux1SwHPReqValid
 	 */
-	REG_INIT(AB8500_REGUSWHPREQVALID1,	0x03, 0x0d, 0xa0),
+	REG_INIT(AB8500_REGUSWHPREQVALID1,	0x03, 0x0d, 0xff),
 	/*
 	 * 0x01, Vaux2SwHPReqValid
 	 * 0x02, Vaux3SwHPReqValid
 	 * 0x04, VextSupply1SwHPReqValid
 	 * 0x08, VextSupply2SwHPReqValid
 	 * 0x10, VextSupply3SwHPReqValid
+	 * 0x20, VmodSwHPReqValid
 	 */
-	REG_INIT(AB8500_REGUSWHPREQVALID2,	0x03, 0x0e, 0x1f),
+	REG_INIT(AB8500_REGUSWHPREQVALID2,	0x03, 0x0e, 0x3f),
 	/*
 	 * 0x02, SysClkReq2Valid1
 	 * ...
@@ -720,33 +749,25 @@ static struct ab8500_reg_init ab8500_reg_init[] = {
 	 */
 	REG_INIT(AB8500_REGUCTRL1VAMIC,		0x03, 0x84, 0x03),
 	/*
-	 * 0x0c, VBBNRegu
 	 * 0x03, VBBPRegu
+	 * 0x0c, VBBNRegu
 	 * NOTE! PRCMU register
 	 */
 	REG_INIT(AB8500_ARMREGU2,		0x04, 0x01, 0x0f),
 	/*
-	 * 0x0c, VBBPSel1
-	 * 0x03, VBBNSel1
-	 * NOTE! PRCMU register
-	 */
-	REG_INIT(AB8500_VBBSEL1,		0x04, 0x11, 0x0f),
-	/*
-	 * 0x0c, VBBNSel2
-	 * 0x03, VBBPSel2
-	 * NOTE! PRCMU register
-	 */
-	REG_INIT(AB8500_VBBSEL2,		0x04, 0x12, 0x0f),
-	/*
 	 * 0x03, Vsmps1Regu
 	 * 0x0c, Vsmps1SelCtrl
+	 * 0x10, Vsmps1AutoMode
+	 * 0x20, Vsmps1PWMMode
 	 */
-	REG_INIT(AB8500_VSMPS1REGU,		0x04, 0x03, 0x0f),
+	REG_INIT(AB8500_VSMPS1REGU,		0x04, 0x03, 0x3f),
 	/*
 	 * 0x03, Vsmps2Regu
 	 * 0x0c, Vsmps2SelCtrl
+	 * 0x10, Vsmps2AutoMode
+	 * 0x20, Vsmps2PWMMode
 	 */
-	REG_INIT(AB8500_VSMPS2REGU,		0x04, 0x04, 0x0f),
+	REG_INIT(AB8500_VSMPS2REGU,		0x04, 0x04, 0x3f),
 	/*
 	 * 0x03, Vsmps3Regu
 	 * 0x0c, Vsmps3SelCtrl
@@ -754,8 +775,8 @@ static struct ab8500_reg_init ab8500_reg_init[] = {
 	 */
 	REG_INIT(AB8500_VSMPS3REGU,		0x04, 0x05, 0x0f),
 	/*
-	 * 0x0c, VanaRegu
 	 * 0x03, VpllRegu
+	 * 0x0c, VanaRegu
 	 */
 	REG_INIT(AB8500_VPLLVANAREGU,		0x04, 0x06, 0x0f),
 	/*
@@ -782,15 +803,49 @@ static struct ab8500_reg_init ab8500_reg_init[] = {
 	 */
 	REG_INIT(AB8500_VRF1VAUX3REGU,		0x04, 0x0a, 0x0f),
 	/*
+	 * 0x0c, VBBPSel1
+	 * 0x03, VBBNSel1
+	 * NOTE! PRCMU register
+	 */
+	REG_INIT(AB8500_VBBSEL1,		0x04, 0x11, 0x0f),
+	/*
+	 * 0x0c, VBBNSel2
+	 * 0x03, VBBPSel2
+	 * NOTE! PRCMU register
+	 */
+	REG_INIT(AB8500_VBBSEL2,		0x04, 0x12, 0x0f),
+	/*
 	 * 0x3f, Vsmps1Sel1
 	 */
 	REG_INIT(AB8500_VSMPS1SEL1,		0x04, 0x13, 0x3f),
 	/*
+	 * 0x3f, Vsmps1Sel2
+	 */
+	REG_INIT(AB8500_VSMPS1SEL2,		0x04, 0x14, 0x3f),
+	/*
+	 * 0x3f, Vsmps1Sel3
+	 */
+	REG_INIT(AB8500_VSMPS1SEL3,		0x04, 0x15, 0x3f),
+	/*
+	 * 0x3f, Vsmps2Sel1
+	 */
+	REG_INIT(AB8500_VSMPS2SEL1,		0x04, 0x17, 0x3f),
+	/*
+	 * 0x3f, Vsmps2Sel2
+	 */
+	REG_INIT(AB8500_VSMPS2SEL2,		0x04, 0x18, 0x3f),
+	/*
+	 * 0x3f, Vsmps2Sel3
+	 */
+	REG_INIT(AB8500_VSMPS2SEL3,		0x04, 0x19, 0x3f),
+	/*
 	 * 0x7f, Vsmps3Sel1
+	 * NOTE! PRCMU register
 	 */
 	REG_INIT(AB8500_VSMPS3SEL1,             0x04, 0x1b, 0x7f),
 	/*
 	 * 0x7f, Vsmps3Sel2
+	 * NOTE! PRCMU register
 	 */
 	REG_INIT(AB8500_VSMPS3SEL2,             0x04, 0x1c, 0x7f),
 	/*
@@ -803,13 +858,16 @@ static struct ab8500_reg_init ab8500_reg_init[] = {
 	REG_INIT(AB8500_VAUX2SEL,		0x04, 0x20, 0x0f),
 	/*
 	 * 0x07, Vaux3Sel
+	 * 0x30, Vrf1Sel
 	 */
-	REG_INIT(AB8500_VRF1VAUX3SEL,		0x04, 0x21, 0x07),
+	REG_INIT(AB8500_VRF1VAUX3SEL,		0x04, 0x21, 0x37),
 	/*
 	 * 0x01, VextSupply12LP
 	 */
 	REG_INIT(AB8500_REGUCTRL2SPARE,		0x04, 0x22, 0x01),
 	/*
+	 * 0x01, VpllDisch
+	 * 0x02, Vrf1Disch
 	 * 0x04, Vaux1Disch
 	 * 0x08, Vaux2Disch
 	 * 0x10, Vaux3Disch
@@ -817,13 +875,15 @@ static struct ab8500_reg_init ab8500_reg_init[] = {
 	 * 0x40, VTVoutDisch
 	 * 0x80, VaudioDisch
 	 */
-	REG_INIT(AB8500_REGUCTRLDISCH,		0x04, 0x43, 0xfc),
+	REG_INIT(AB8500_REGUCTRLDISCH,		0x04, 0x43, 0xff),
 	/*
+	 * 0x01, VsimDisch
 	 * 0x02, VanaDisch
 	 * 0x04, VdmicPullDownEna
+	 * 0x08, VpllPullDownEna
 	 * 0x10, VdmicDisch
 	 */
-	REG_INIT(AB8500_REGUCTRLDISCH2,		0x04, 0x44, 0x16),
+	REG_INIT(AB8500_REGUCTRLDISCH2,		0x04, 0x44, 0x1f),
 };
 
 static int ab8500_regulator_init_registers(struct platform_device *pdev,
diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h
index a1d245f..7ac3281 100644
--- a/include/linux/regulator/ab8500.h
+++ b/include/linux/regulator/ab8500.h
@@ -61,6 +61,7 @@ struct ab8500_regulator_reg_init {
 
 /* AB8500 registers */
 enum ab8500_regulator_reg {
+	AB8500_REGUREQUESTCTRL1,
 	AB8500_REGUREQUESTCTRL2,
 	AB8500_REGUREQUESTCTRL3,
 	AB8500_REGUREQUESTCTRL4,
@@ -77,26 +78,31 @@ enum ab8500_regulator_reg {
 	AB8500_REGUMISC1,
 	AB8500_VAUDIOSUPPLY,
 	AB8500_REGUCTRL1VAMIC,
+	AB8500_ARMREGU2, /* NOTE! PRCMU register */
+	AB8500_VSMPS1REGU,
+	AB8500_VSMPS2REGU,
+	AB8500_VSMPS3REGU, /* NOTE! PRCMU register */
 	AB8500_VPLLVANAREGU,
 	AB8500_VREFDDR,
 	AB8500_EXTSUPPLYREGU,
 	AB8500_VAUX12REGU,
 	AB8500_VRF1VAUX3REGU,
+	AB8500_VBBSEL1, /* NOTE! PRCMU register */
+	AB8500_VBBSEL2, /* NOTE! PRCMU register */
+	AB8500_VSMPS1SEL1,
+	AB8500_VSMPS1SEL2,
+	AB8500_VSMPS1SEL3,
+	AB8500_VSMPS2SEL1,
+	AB8500_VSMPS2SEL2,
+	AB8500_VSMPS2SEL3,
+	AB8500_VSMPS3SEL1, /* NOTE! PRCMU register */
+	AB8500_VSMPS3SEL2, /* NOTE! PRCMU register */
 	AB8500_VAUX1SEL,
 	AB8500_VAUX2SEL,
 	AB8500_VRF1VAUX3SEL,
 	AB8500_REGUCTRL2SPARE,
 	AB8500_REGUCTRLDISCH,
 	AB8500_REGUCTRLDISCH2,
-	AB8500_ARMREGU2, /* NOTE! PRCMU register */
-	AB8500_VBBSEL1, /* NOTE! PRCMU register */
-	AB8500_VBBSEL2, /* NOTE! PRCMU register */
-	AB8500_VSMPS1REGU,
-	AB8500_VSMPS2REGU,
-	AB8500_VSMPS3REGU, /* NOTE! PRCMU register */
-	AB8500_VSMPS1SEL1,
-	AB8500_VSMPS3SEL1, /* NOTE! PRCMU register */
-	AB8500_VSMPS3SEL2, /* NOTE! PRCMU register */
 	AB8500_NUM_REGULATOR_REGISTERS,
 };
 
-- 
1.7.9.5


  parent reply	other threads:[~2013-02-04 12:15 UTC|newest]

Thread overview: 85+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-02-04 11:53 [PATCH 00/73 v2] Regulators: Bring the AB8500 into the 20th century Lee Jones
2013-02-04 11:53 ` [PATCH 01/73] regulator: ab8500: Remove VBB from suspend force Lee Jones
2013-02-04 11:53 ` [PATCH 02/73] regulator: ab8500: Initialize Vrf1 regulator Lee Jones
2013-02-04 11:53 ` [PATCH 03/73] regulator: ab8500: Add init values for vsmps1/2 Lee Jones
2013-02-04 11:53 ` [PATCH 04/73] regulator: ab8500: Added SysClkReq1 control of Vpll Lee Jones
2013-02-04 11:53 ` [PATCH 05/73] ARM: ux500: Vsmps3 controlled by SysClkReq1 Lee Jones
2013-02-04 19:37   ` Mark Brown
2013-02-04 21:21     ` Linus Walleij
2013-02-05 12:01       ` Mark Brown
2013-02-05 13:03         ` Lee Jones
2013-02-26  9:44         ` Lee Jones
2013-02-26 10:16           ` Bengt Jönsson
2013-02-26 12:50           ` Mark Brown
2013-02-04 11:53 ` [PATCH 06/73] regulator: ab8500: Add set_mode/get_mode support Lee Jones
2013-02-04 11:53 ` [PATCH 07/73] regulator: ab8500: Fix for regulator_set_mode functionality Lee Jones
2013-02-04 19:38   ` Mark Brown
2013-02-04 11:53 ` [PATCH 08/73] regulator: ab8500: Added get_optimum_mode on regulators with idle mode Lee Jones
2013-02-04 11:53 ` [PATCH 09/73] ARM: ux500: regulators: Add mask for configuration Lee Jones
2013-02-04 11:53 ` Lee Jones [this message]
2013-02-04 11:53 ` [PATCH 11/73] regulator: ab8500: Removed initialization of body biasing Lee Jones
2013-02-04 11:53 ` [PATCH 12/73] regulator: core: Show consumers that hold a regulator in Sysfs Lee Jones
2013-02-04 19:41   ` Mark Brown
2013-02-04 11:53 ` [PATCH 13/73] regulator: ab8500: Separate regulator and MFD platform data Lee Jones
2013-02-04 11:53 ` [PATCH 14/73] regulator: ab8500: Add support of low voltage battery Lee Jones
2013-02-04 11:53 ` [PATCH 15/73] ARM: ux500: Update displays in vaux1 consumer list Lee Jones
2013-02-04 11:53 ` [PATCH 16/73] regulator: ab8500-ext: Cosmetic changes Lee Jones
2013-02-04 11:53 ` [PATCH 17/73] regulator: ab8500-ext: Add HW request support Lee Jones
2013-02-04 11:53 ` [PATCH 18/73] regulator: ab8500-ext: Add suspend support Lee Jones
2013-02-04 11:53 ` [PATCH 19/73] regulator: ab8500-ext: Add regulator_set_mode/get_mode Lee Jones
2013-02-04 11:53 ` [PATCH 20/73] regulator: ab8500-ext: Add VextSupply1 regulator Lee Jones
2013-02-04 11:53 ` [PATCH 21/73] regulator: ab8500-ext: Add VextSupply2 regulator Lee Jones
2013-02-04 11:53 ` [PATCH 22/73] regulator: ab8500: Remove USB regulator Lee Jones
2013-02-04 11:53 ` [PATCH 23/73] regulator: ab8500: Init debug from regulator driver Lee Jones
2013-02-04 11:53 ` [PATCH 24/73] ARM: ux500: Add supply for the L3G4200D Gyroscope Lee Jones
2013-02-04 11:53 ` [PATCH 25/73] ARM: ux500: Add supply for the Proximity and Hal sensor Lee Jones
2013-02-04 11:53 ` [PATCH 26/73] ARM: ux500: Add supply for the Ambient light sensor device Lee Jones
2013-02-04 11:53 ` [PATCH 27/73] ARM: ux500: Add supply for the Pressure sensor Lee Jones
2013-02-04 11:53 ` [PATCH 28/73] ARM: ux500: Add supply for the Cypress TrueTouch Touchscreen Lee Jones
2013-02-04 11:53 ` [PATCH 29/73] ARM: ux500: Add supply for the MMIO Camera Lee Jones
2013-02-04 11:53 ` [PATCH 30/73] regulator: ab8500: Remove Vsafe voltage settings Lee Jones
2013-02-04 11:53 ` [PATCH 31/73] regulator: ab8500: Remove Vsafe settings Lee Jones
2013-02-04 11:53 ` [PATCH 32/73] regulator: ab8500: Clean out SoC registers Lee Jones
2013-02-04 11:53 ` [PATCH 33/73] regulator: ab8500: Add support for the AB9540 Lee Jones
2013-02-04 11:53 ` [PATCH 34/73] regulator: ab8500: Correct TVOUT regulator start-up delay Lee Jones
2013-02-04 11:53 ` [PATCH 35/73] regulator: ab8500-ext: Add support for AB8505/AB9540 Lee Jones
2013-02-04 11:53 ` [PATCH 36/73] ARM: ux500: Partially revert changes surrounding audio regulators Lee Jones
2013-02-04 11:53 ` [PATCH 37/73] regulator: ab8500: add support for ab8505 Lee Jones
2013-02-04 11:53 ` [PATCH 38/73] ARM: ux500: regulator: Use device IDs instead of device names Lee Jones
2013-02-04 11:53 ` [PATCH 39/73] regulator: ab8500-ext: Add support for AB9540 regulators Lee Jones
2013-02-04 11:53 ` [PATCH 40/73] regulator: ab8500: Add AB8505 register initialization Lee Jones
2013-02-04 11:53 ` [PATCH 41/73] regulator: ab8500: Provide full settings for AB8540 regulators Lee Jones
2013-02-04 11:53 ` [PATCH 42/73] regulator: ab8500: Correct init mask for AB8540 Lee Jones
2013-02-04 11:53 ` [PATCH 43/73] regulator: ab8500: Add VSDIO definition for the AB8540 Lee Jones
2013-02-04 11:53 ` [PATCH 44/73] regulator: ab8500: Vaux5/6 cannot be disabled on " Lee Jones
2013-02-04 11:54 ` [PATCH 45/73] regulator: ab8500: Update voltage handling for fixed voltage regulators Lee Jones
2013-02-04 11:54 ` [PATCH 46/73] regulator: ab8500: Delete useless fixed_uV field Lee Jones
2013-02-04 11:54 ` [PATCH 47/73] regulator: ab8500: Update AB9540 init masks Lee Jones
2013-02-04 11:54 ` [PATCH 48/73] regulator: ab8500: Use regulator_list_voltage_table() Lee Jones
2013-02-04 11:54 ` [PATCH 49/73] regulator: ab8500: Fix vsdio parameters for AB8540 based platforms Lee Jones
2013-02-04 11:54 ` [PATCH 50/73] regulator: ab8500: Correct regulator id values Lee Jones
2013-02-04 11:54 ` [PATCH 51/73] regulator: ab8500: Regulator vaux8 not declared using correct name Lee Jones
2013-02-04 11:54 ` [PATCH 52/73] ARM ux500: Remove external regulators from AB8505 init data Lee Jones
2013-02-05 15:22   ` Linus Walleij
2013-02-04 11:54 ` [PATCH 53/73] regulator: ab8500: Don't register external regulators on AB8505 Lee Jones
2013-02-04 11:54 ` [PATCH 54/73] regulator: ab8500: Add voltage selection for AUDIO and ANA " Lee Jones
2013-02-04 11:54 ` [PATCH 55/73] regulator: ab8500: Provide ExtSupply register init values for AB8505 Lee Jones
2013-02-04 11:54 ` [PATCH 56/73] regulator: ab8500: Also check for AB8505 based platforms Lee Jones
2013-02-04 11:54 ` [PATCH 57/73] regulator: ab8500: Remove surplus include of id.h Lee Jones
2013-02-04 11:54 ` [PATCH 58/73] regulator: ab8500: Add new operations for Vaux3 Lee Jones
2013-02-04 11:54 ` [PATCH 59/73] regulator: ab8500: Change mode fix for LDO USB Lee Jones
2013-02-04 11:54 ` [PATCH 60/73] ARM: ux500: regulators: Add LDO USB consumer Lee Jones
2013-02-05 15:21   ` Linus Walleij
2013-02-04 11:54 ` [PATCH 61/73] regulator: ab8500: Default value on LDO USB to HP Lee Jones
2013-02-04 11:54 ` [PATCH 62/73] regulator: ab8500: Remove vusb from AB8540 regulator framework Lee Jones
2013-02-04 11:54 ` [PATCH 63/73] regulator: ab8500: Add mode operation for v-amic Lee Jones
2013-02-04 11:54 ` [PATCH 64/73] regulator: ab8500: Update vdmic, vamic[1|2] parameters for AB8540 Lee Jones
2013-02-04 11:54 ` [PATCH 65/73] regulator: ab8500: Update VAna supply management for the AB9540 Lee Jones
2013-02-04 11:54 ` [PATCH 66/73] regulator: ab8500-ext: Adapt regulator registration for newly changed API Lee Jones
2013-02-04 11:54 ` [PATCH 67/73] regulator: ab8500: Use a struct to select the good regulator configuration Lee Jones
2013-02-04 11:54 ` [PATCH 68/73] regulator: ab8500: Provide DT support for additional platforms Lee Jones
2013-02-04 11:54 ` [PATCH 69/73] regulator: ab8500: Introduce aux5, aux6 regulators for AB8540 Lee Jones
2013-02-04 11:54 ` [PATCH 70/73] regulator: ab8500: Set enable enable_time in regulator_desc Lee Jones
2013-02-04 11:54 ` [PATCH 71/73] regulator: ab8500: Remove the need for a 'delay' property Lee Jones
2013-02-04 11:54 ` [PATCH 72/73] regulator: ab8500: Use regulator_list_voltage_table() to look-up voltages Lee Jones
2013-02-04 11:54 ` [PATCH 73/73] ARM: ux500: Pass regulator platform data using the new format Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1359978868-28736-11-git-send-email-lee.jones@linaro.org \
    --to=lee.jones@linaro.org \
    --cc=bengt.g.jonsson@stericsson.com \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®