mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: linux-kernel@vger.kernel.org, broonie@opensource.wolfsonmicro.com
Cc: Lee Jones <lee.jones@linaro.org>,
	Gabriel Fernandez <gabriel.fernandez@stericsson.com>
Subject: [PATCH 67/73] regulator: ab8500: Use a struct to select the good regulator configuration
Date: Mon,  4 Feb 2013 11:54:22 +0000	[thread overview]
Message-ID: <1359978868-28736-68-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1359978868-28736-1-git-send-email-lee.jones@linaro.org>

At the probe use a structure to select the good regulator array from
from ab9540, ab8505, ab8540 or ab8500 configuration.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
---
 drivers/regulator/ab8500.c |  113 +++++++++++++++++++-------------------------
 1 file changed, 48 insertions(+), 65 deletions(-)

diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index fa0979a..b6e8f4d 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -2845,10 +2845,17 @@ static struct ab8500_reg_init ab8540_reg_init[] = {
 	REG_INIT(AB8540_REGUCTRLDISCH4,		0x04, 0x49, 0x07),
 };
 
+static struct {
+	struct ab8500_regulator_info *info;
+	int info_size;
+	struct ab8500_reg_init *init;
+	int init_size;
+} abx500_regulator;
+
 static int ab8500_regulator_init_registers(struct platform_device *pdev,
-					   struct ab8500_reg_init *reg_init,
 					   int id, int mask, int value)
 {
+	struct ab8500_reg_init *reg_init = abx500_regulator.init;
 	int err;
 
 	BUG_ON(value & ~mask);
@@ -2878,7 +2885,6 @@ static int ab8500_regulator_init_registers(struct platform_device *pdev,
 
 static int ab8500_regulator_register(struct platform_device *pdev,
 				     struct regulator_init_data *init_data,
-				     struct ab8500_regulator_info *regulator_info,
 				     int id, struct device_node *np)
 {
 	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
@@ -2887,7 +2893,7 @@ static int ab8500_regulator_register(struct platform_device *pdev,
 	int err;
 
 	/* assign per-regulator data */
-	info = &regulator_info[id];
+	info = &abx500_regulator.info[id];
 	info->dev = &pdev->dev;
 
 	config.dev = &pdev->dev;
@@ -2913,7 +2919,7 @@ static int ab8500_regulator_register(struct platform_device *pdev,
 			info->desc.name);
 		/* when we fail, un-register all earlier regulators */
 		while (--id >= 0) {
-			info = &regulator_info[id];
+			info = &abx500_regulator.info[id];
 			regulator_unregister(info->regulator);
 		}
 		return err;
@@ -2949,19 +2955,41 @@ static struct of_regulator_match ab9540_regulator_match[] = {
 	{ .name	= "ab9540_ldo_ana",     .driver_data = (void *) AB9540_LDO_ANA, },
 };
 
+static void abx500_get_regulator_info(struct ab8500 *ab8500)
+{
+	if (is_ab9540(ab8500)) {
+		abx500_regulator.info = ab9540_regulator_info;
+		abx500_regulator.info_size = ARRAY_SIZE(ab9540_regulator_info);
+		abx500_regulator.init = ab9540_reg_init;
+		abx500_regulator.init_size = AB9540_NUM_REGULATOR_REGISTERS;
+	} else if (is_ab8505(ab8500)) {
+		abx500_regulator.info = ab8505_regulator_info;
+		abx500_regulator.info_size = ARRAY_SIZE(ab8505_regulator_info);
+		abx500_regulator.init = ab8505_reg_init;
+		abx500_regulator.init_size = AB8505_NUM_REGULATOR_REGISTERS;
+	} else if (is_ab8540(ab8500)) {
+		abx500_regulator.info = ab8540_regulator_info;
+		abx500_regulator.info_size = ARRAY_SIZE(ab8540_regulator_info);
+		abx500_regulator.init = ab8540_reg_init;
+		abx500_regulator.init_size = AB8540_NUM_REGULATOR_REGISTERS;
+	} else {
+		abx500_regulator.info = ab8500_regulator_info;
+		abx500_regulator.info_size = ARRAY_SIZE(ab8500_regulator_info);
+		abx500_regulator.init = ab8500_reg_init;
+		abx500_regulator.init_size = AB8500_NUM_REGULATOR_REGISTERS;
+	}
+}
+
 static int
 ab8500_regulator_of_probe(struct platform_device *pdev,
-			  struct ab8500_regulator_info *regulator_info,
-			  int regulator_info_size,
-			  struct of_regulator_match *match,
 			  struct device_node *np)
 {
+	struct of_regulator_match *match = abx500_regulator.match;
 	int err, i;
 
-	for (i = 0; i < regulator_info_size; i++) {
+	for (i = 0; i < abx500_regulator.info_size; i++) {
 		err = ab8500_regulator_register(
-			pdev, match[i].init_data, regulator_info,
-			i, match[i].of_node);
+			pdev, match[i].init_data, i, match[i].of_node);
 		if (err)
 			return err;
 	}
@@ -2973,41 +3001,14 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
 {
 	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
 	struct device_node *np = pdev->dev.of_node;
-	struct of_regulator_match *match;
 	struct ab8500_platform_data *ppdata;
 	struct ab8500_regulator_platform_data *pdata;
 	int i, err;
-	struct ab8500_regulator_info *regulator_info;
-	int regulator_info_size;
 	struct ab8500_reg_init *reg_init;
-	int reg_init_size;
+
 	/* cache values needed repeatedly inside for-loops */
 
-	if (is_ab9540(ab8500)) {
-		regulator_info = ab9540_regulator_info;
-		regulator_info_size = ARRAY_SIZE(ab9540_regulator_info);
-		reg_init = ab9540_reg_init;
-		reg_init_size = AB9540_NUM_REGULATOR_REGISTERS;
-		match = ab9540_regulator_matches;
-		match_size = ARRAY_SIZE(ab9540_regulator_matches)
-	} else if (is_ab8505(ab8500)) {
-		regulator_info = ab8505_regulator_info;
-		regulator_info_size = ARRAY_SIZE(ab8505_regulator_info);
-		reg_init = ab8505_reg_init;
-		reg_init_size = AB8505_NUM_REGULATOR_REGISTERS;
-	} else if (is_ab8540(ab8500)) {
-		regulator_info = ab8540_regulator_info;
-		regulator_info_size = ARRAY_SIZE(ab8540_regulator_info);
-		reg_init = ab8540_reg_init;
-		reg_init_size = AB8540_NUM_REGULATOR_REGISTERS;
-	} else {
-		regulator_info = ab8500_regulator_info;
-		regulator_info_size = ARRAY_SIZE(ab8500_regulator_info);
-		reg_init = ab8500_reg_init;
-		reg_init_size = AB8500_NUM_REGULATOR_REGISTERS;
-		match = ab8500_regulator_matches;
-		match_size = ARRAY_SIZE(ab8500_regulator_matches)
-	}
+	abx500_get_regulator_info(ab8500);
 
 	if (np) {
 		err = of_regulator_match(&pdev->dev, np, match, match_size);
@@ -3017,8 +3018,7 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
 			return err;
 		}
 
-		err = ab8500_regulator_of_probe(pdev, regulator_info,
-						regulator_info_size, match, np);
+		err = ab8500_regulator_of_probe(pdev, match, np);
 		return err;
 	}
 
@@ -3040,7 +3040,7 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
 	}
 
 	/* make sure the platform data has the correct size */
-	if (pdata->num_regulator != regulator_info_size) {
+	if (pdata->num_regulator != abx500_regulator.info_size) {
 		dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
 		return -EINVAL;
 	}
@@ -3059,9 +3059,9 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
 		value = pdata->reg_init[i].value;
 
 		/* check for configuration errors */
-		BUG_ON(id >= AB8500_NUM_REGULATOR_REGISTERS);
+		BUG_ON(id >= abx500_regulator.init_size);
 
-		err = ab8500_regulator_init_registers(pdev, reg_init, id, mask, value);
+		err = ab8500_regulator_init_registers(pdev, id, mask, value);
 		if (err < 0)
 			return err;
 	}
@@ -3074,9 +3074,9 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
 	}
 
 	/* register all regulators */
-	for (i = 0; i < regulator_info_size; i++) {
+	for (i = 0; i < abx500_regulator.info_size; i++) {
 		err = ab8500_regulator_register(pdev, &pdata->regulator[i],
-						regulator_info, i, NULL);
+						i, NULL);
 		if (err < 0)
 			return err;
 	}
@@ -3088,27 +3088,10 @@ static int ab8500_regulator_remove(struct platform_device *pdev)
 {
 	int i, err;
 	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
-	struct ab8500_regulator_info *regulator_info;
-	int regulator_info_size;
-
-
-	if (is_ab9540(ab8500)) {
-		regulator_info = ab9540_regulator_info;
-		regulator_info_size = ARRAY_SIZE(ab9540_regulator_info);
-	} else if (is_ab8505(ab8500)) {
-		regulator_info = ab8505_regulator_info;
-		regulator_info_size = ARRAY_SIZE(ab8505_regulator_info);
-	} else if (is_ab8540(ab8500)) {
-		regulator_info = ab8540_regulator_info;
-		regulator_info_size = ARRAY_SIZE(ab8540_regulator_info);
-	} else {
-		regulator_info = ab8500_regulator_info;
-		regulator_info_size = ARRAY_SIZE(ab8500_regulator_info);
-	}
 
-	for (i = 0; i < regulator_info_size; i++) {
+	for (i = 0; i < abx500_regulator.info_size; i++) {
 		struct ab8500_regulator_info *info = NULL;
-		info = &regulator_info[i];
+		info = &abx500_regulator.info[i];
 
 		dev_vdbg(rdev_get_dev(info->regulator),
 			"%s-remove\n", info->desc.name);
-- 
1.7.9.5


  parent reply	other threads:[~2013-02-04 11:58 UTC|newest]

Thread overview: 85+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-02-04 11:53 [PATCH 00/73 v2] Regulators: Bring the AB8500 into the 20th century Lee Jones
2013-02-04 11:53 ` [PATCH 01/73] regulator: ab8500: Remove VBB from suspend force Lee Jones
2013-02-04 11:53 ` [PATCH 02/73] regulator: ab8500: Initialize Vrf1 regulator Lee Jones
2013-02-04 11:53 ` [PATCH 03/73] regulator: ab8500: Add init values for vsmps1/2 Lee Jones
2013-02-04 11:53 ` [PATCH 04/73] regulator: ab8500: Added SysClkReq1 control of Vpll Lee Jones
2013-02-04 11:53 ` [PATCH 05/73] ARM: ux500: Vsmps3 controlled by SysClkReq1 Lee Jones
2013-02-04 19:37   ` Mark Brown
2013-02-04 21:21     ` Linus Walleij
2013-02-05 12:01       ` Mark Brown
2013-02-05 13:03         ` Lee Jones
2013-02-26  9:44         ` Lee Jones
2013-02-26 10:16           ` Bengt Jönsson
2013-02-26 12:50           ` Mark Brown
2013-02-04 11:53 ` [PATCH 06/73] regulator: ab8500: Add set_mode/get_mode support Lee Jones
2013-02-04 11:53 ` [PATCH 07/73] regulator: ab8500: Fix for regulator_set_mode functionality Lee Jones
2013-02-04 19:38   ` Mark Brown
2013-02-04 11:53 ` [PATCH 08/73] regulator: ab8500: Added get_optimum_mode on regulators with idle mode Lee Jones
2013-02-04 11:53 ` [PATCH 09/73] ARM: ux500: regulators: Add mask for configuration Lee Jones
2013-02-04 11:53 ` [PATCH 10/73] regulator: ab8500: Added more configurable bits Lee Jones
2013-02-04 11:53 ` [PATCH 11/73] regulator: ab8500: Removed initialization of body biasing Lee Jones
2013-02-04 11:53 ` [PATCH 12/73] regulator: core: Show consumers that hold a regulator in Sysfs Lee Jones
2013-02-04 19:41   ` Mark Brown
2013-02-04 11:53 ` [PATCH 13/73] regulator: ab8500: Separate regulator and MFD platform data Lee Jones
2013-02-04 11:53 ` [PATCH 14/73] regulator: ab8500: Add support of low voltage battery Lee Jones
2013-02-04 11:53 ` [PATCH 15/73] ARM: ux500: Update displays in vaux1 consumer list Lee Jones
2013-02-04 11:53 ` [PATCH 16/73] regulator: ab8500-ext: Cosmetic changes Lee Jones
2013-02-04 11:53 ` [PATCH 17/73] regulator: ab8500-ext: Add HW request support Lee Jones
2013-02-04 11:53 ` [PATCH 18/73] regulator: ab8500-ext: Add suspend support Lee Jones
2013-02-04 11:53 ` [PATCH 19/73] regulator: ab8500-ext: Add regulator_set_mode/get_mode Lee Jones
2013-02-04 11:53 ` [PATCH 20/73] regulator: ab8500-ext: Add VextSupply1 regulator Lee Jones
2013-02-04 11:53 ` [PATCH 21/73] regulator: ab8500-ext: Add VextSupply2 regulator Lee Jones
2013-02-04 11:53 ` [PATCH 22/73] regulator: ab8500: Remove USB regulator Lee Jones
2013-02-04 11:53 ` [PATCH 23/73] regulator: ab8500: Init debug from regulator driver Lee Jones
2013-02-04 11:53 ` [PATCH 24/73] ARM: ux500: Add supply for the L3G4200D Gyroscope Lee Jones
2013-02-04 11:53 ` [PATCH 25/73] ARM: ux500: Add supply for the Proximity and Hal sensor Lee Jones
2013-02-04 11:53 ` [PATCH 26/73] ARM: ux500: Add supply for the Ambient light sensor device Lee Jones
2013-02-04 11:53 ` [PATCH 27/73] ARM: ux500: Add supply for the Pressure sensor Lee Jones
2013-02-04 11:53 ` [PATCH 28/73] ARM: ux500: Add supply for the Cypress TrueTouch Touchscreen Lee Jones
2013-02-04 11:53 ` [PATCH 29/73] ARM: ux500: Add supply for the MMIO Camera Lee Jones
2013-02-04 11:53 ` [PATCH 30/73] regulator: ab8500: Remove Vsafe voltage settings Lee Jones
2013-02-04 11:53 ` [PATCH 31/73] regulator: ab8500: Remove Vsafe settings Lee Jones
2013-02-04 11:53 ` [PATCH 32/73] regulator: ab8500: Clean out SoC registers Lee Jones
2013-02-04 11:53 ` [PATCH 33/73] regulator: ab8500: Add support for the AB9540 Lee Jones
2013-02-04 11:53 ` [PATCH 34/73] regulator: ab8500: Correct TVOUT regulator start-up delay Lee Jones
2013-02-04 11:53 ` [PATCH 35/73] regulator: ab8500-ext: Add support for AB8505/AB9540 Lee Jones
2013-02-04 11:53 ` [PATCH 36/73] ARM: ux500: Partially revert changes surrounding audio regulators Lee Jones
2013-02-04 11:53 ` [PATCH 37/73] regulator: ab8500: add support for ab8505 Lee Jones
2013-02-04 11:53 ` [PATCH 38/73] ARM: ux500: regulator: Use device IDs instead of device names Lee Jones
2013-02-04 11:53 ` [PATCH 39/73] regulator: ab8500-ext: Add support for AB9540 regulators Lee Jones
2013-02-04 11:53 ` [PATCH 40/73] regulator: ab8500: Add AB8505 register initialization Lee Jones
2013-02-04 11:53 ` [PATCH 41/73] regulator: ab8500: Provide full settings for AB8540 regulators Lee Jones
2013-02-04 11:53 ` [PATCH 42/73] regulator: ab8500: Correct init mask for AB8540 Lee Jones
2013-02-04 11:53 ` [PATCH 43/73] regulator: ab8500: Add VSDIO definition for the AB8540 Lee Jones
2013-02-04 11:53 ` [PATCH 44/73] regulator: ab8500: Vaux5/6 cannot be disabled on " Lee Jones
2013-02-04 11:54 ` [PATCH 45/73] regulator: ab8500: Update voltage handling for fixed voltage regulators Lee Jones
2013-02-04 11:54 ` [PATCH 46/73] regulator: ab8500: Delete useless fixed_uV field Lee Jones
2013-02-04 11:54 ` [PATCH 47/73] regulator: ab8500: Update AB9540 init masks Lee Jones
2013-02-04 11:54 ` [PATCH 48/73] regulator: ab8500: Use regulator_list_voltage_table() Lee Jones
2013-02-04 11:54 ` [PATCH 49/73] regulator: ab8500: Fix vsdio parameters for AB8540 based platforms Lee Jones
2013-02-04 11:54 ` [PATCH 50/73] regulator: ab8500: Correct regulator id values Lee Jones
2013-02-04 11:54 ` [PATCH 51/73] regulator: ab8500: Regulator vaux8 not declared using correct name Lee Jones
2013-02-04 11:54 ` [PATCH 52/73] ARM ux500: Remove external regulators from AB8505 init data Lee Jones
2013-02-05 15:22   ` Linus Walleij
2013-02-04 11:54 ` [PATCH 53/73] regulator: ab8500: Don't register external regulators on AB8505 Lee Jones
2013-02-04 11:54 ` [PATCH 54/73] regulator: ab8500: Add voltage selection for AUDIO and ANA " Lee Jones
2013-02-04 11:54 ` [PATCH 55/73] regulator: ab8500: Provide ExtSupply register init values for AB8505 Lee Jones
2013-02-04 11:54 ` [PATCH 56/73] regulator: ab8500: Also check for AB8505 based platforms Lee Jones
2013-02-04 11:54 ` [PATCH 57/73] regulator: ab8500: Remove surplus include of id.h Lee Jones
2013-02-04 11:54 ` [PATCH 58/73] regulator: ab8500: Add new operations for Vaux3 Lee Jones
2013-02-04 11:54 ` [PATCH 59/73] regulator: ab8500: Change mode fix for LDO USB Lee Jones
2013-02-04 11:54 ` [PATCH 60/73] ARM: ux500: regulators: Add LDO USB consumer Lee Jones
2013-02-05 15:21   ` Linus Walleij
2013-02-04 11:54 ` [PATCH 61/73] regulator: ab8500: Default value on LDO USB to HP Lee Jones
2013-02-04 11:54 ` [PATCH 62/73] regulator: ab8500: Remove vusb from AB8540 regulator framework Lee Jones
2013-02-04 11:54 ` [PATCH 63/73] regulator: ab8500: Add mode operation for v-amic Lee Jones
2013-02-04 11:54 ` [PATCH 64/73] regulator: ab8500: Update vdmic, vamic[1|2] parameters for AB8540 Lee Jones
2013-02-04 11:54 ` [PATCH 65/73] regulator: ab8500: Update VAna supply management for the AB9540 Lee Jones
2013-02-04 11:54 ` [PATCH 66/73] regulator: ab8500-ext: Adapt regulator registration for newly changed API Lee Jones
2013-02-04 11:54 ` Lee Jones [this message]
2013-02-04 11:54 ` [PATCH 68/73] regulator: ab8500: Provide DT support for additional platforms Lee Jones
2013-02-04 11:54 ` [PATCH 69/73] regulator: ab8500: Introduce aux5, aux6 regulators for AB8540 Lee Jones
2013-02-04 11:54 ` [PATCH 70/73] regulator: ab8500: Set enable enable_time in regulator_desc Lee Jones
2013-02-04 11:54 ` [PATCH 71/73] regulator: ab8500: Remove the need for a 'delay' property Lee Jones
2013-02-04 11:54 ` [PATCH 72/73] regulator: ab8500: Use regulator_list_voltage_table() to look-up voltages Lee Jones
2013-02-04 11:54 ` [PATCH 73/73] ARM: ux500: Pass regulator platform data using the new format Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1359978868-28736-68-git-send-email-lee.jones@linaro.org \
    --to=lee.jones@linaro.org \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=gabriel.fernandez@stericsson.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®