From: Lee Jones <lee.jones@linaro.org>
To: linux-kernel@vger.kernel.org, broonie@opensource.wolfsonmicro.com
Cc: Lee Jones <lee.jones@linaro.org>,
Marcus Cooper <marcus.xm.cooper@stericsson.com>
Subject: [PATCH 50/73] regulator: ab8500: Correct regulator id values
Date: Mon, 4 Feb 2013 11:54:05 +0000 [thread overview]
Message-ID: <1359978868-28736-51-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1359978868-28736-1-git-send-email-lee.jones@linaro.org>
The regulator id in the regulator info array should be the same
values as the position of the element within the array. This
patch fixes the mismatches.
Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
---
drivers/regulator/ab8500.c | 66 ++++++++++++++++++++++----------------------
1 file changed, 33 insertions(+), 33 deletions(-)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index b09b507..7089a38 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -650,7 +650,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUX1",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUX1,
+ .id = AB8505_LDO_AUX1,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
@@ -671,7 +671,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUX2",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUX2,
+ .id = AB8505_LDO_AUX2,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
@@ -692,7 +692,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUX3",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUX3,
+ .id = AB8505_LDO_AUX3,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
.volt_table = ldo_vaux3_voltages,
@@ -713,7 +713,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUX4",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB9540_LDO_AUX4,
+ .id = AB8505_LDO_AUX4,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
@@ -780,7 +780,7 @@ static struct ab8500_regulator_info
.name = "LDO-INTCORE",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_INTCORE,
+ .id = AB8505_LDO_INTCORE,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
.volt_table = ldo_vintcore_voltages,
@@ -826,7 +826,7 @@ static struct ab8500_regulator_info
.name = "LDO-USB",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB9540_LDO_USB,
+ .id = AB8505_LDO_USB,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_3300000_voltage,
@@ -843,7 +843,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUDIO",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUDIO,
+ .id = AB8505_LDO_AUDIO,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_2000000_voltage,
@@ -858,7 +858,7 @@ static struct ab8500_regulator_info
.name = "LDO-ANAMIC1",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_ANAMIC1,
+ .id = AB8505_LDO_ANAMIC1,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_2050000_voltage,
@@ -873,7 +873,7 @@ static struct ab8500_regulator_info
.name = "LDO-ANAMIC2",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_ANAMIC2,
+ .id = AB8505_LDO_ANAMIC2,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_2050000_voltage,
@@ -888,7 +888,7 @@ static struct ab8500_regulator_info
.name = "LDO-DMIC",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_DMIC,
+ .id = AB8505_LDO_DMIC,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_1800000_voltage,
@@ -906,7 +906,7 @@ static struct ab8500_regulator_info
.name = "LDO-ANA",
.ops = &ab8500_regulator_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_ANA,
+ .id = AB8505_LDO_ANA,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_1200000_voltage,
@@ -935,7 +935,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUX1",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUX1,
+ .id = AB9540_LDO_AUX1,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
@@ -956,7 +956,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUX2",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUX2,
+ .id = AB9540_LDO_AUX2,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
@@ -977,7 +977,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUX3",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUX3,
+ .id = AB9540_LDO_AUX3,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
.volt_table = ldo_vaux3_voltages,
@@ -1021,7 +1021,7 @@ static struct ab8500_regulator_info
.name = "LDO-INTCORE",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_INTCORE,
+ .id = AB9540_LDO_INTCORE,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
.volt_table = ldo_vintcore_voltages,
@@ -1048,7 +1048,7 @@ static struct ab8500_regulator_info
.name = "LDO-TVOUT",
.ops = &ab8500_regulator_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_TVOUT,
+ .id = AB9540_LDO_TVOUT,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_2000000_voltage,
@@ -1084,7 +1084,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUDIO",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUDIO,
+ .id = AB9540_LDO_AUDIO,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_2000000_voltage,
@@ -1099,7 +1099,7 @@ static struct ab8500_regulator_info
.name = "LDO-ANAMIC1",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_ANAMIC1,
+ .id = AB9540_LDO_ANAMIC1,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_2050000_voltage,
@@ -1114,7 +1114,7 @@ static struct ab8500_regulator_info
.name = "LDO-ANAMIC2",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_ANAMIC2,
+ .id = AB9540_LDO_ANAMIC2,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_2050000_voltage,
@@ -1129,7 +1129,7 @@ static struct ab8500_regulator_info
.name = "LDO-DMIC",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_DMIC,
+ .id = AB9540_LDO_DMIC,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_1800000_voltage,
@@ -1148,7 +1148,7 @@ static struct ab8500_regulator_info
.name = "LDO-ANA",
.ops = &ab8500_regulator_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_ANA,
+ .id = AB9540_LDO_ANA,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_1200000_voltage,
@@ -1177,7 +1177,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUX1",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUX1,
+ .id = AB8540_LDO_AUX1,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
@@ -1198,7 +1198,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUX2",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUX2,
+ .id = AB8540_LDO_AUX2,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
@@ -1219,7 +1219,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUX3",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUX3,
+ .id = AB8540_LDO_AUX3,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vaux3_ab8540_voltages),
.volt_table = ldo_vaux3_ab8540_voltages,
@@ -1240,7 +1240,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUX4",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB9540_LDO_AUX4,
+ .id = AB8540_LDO_AUX4,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
@@ -1263,7 +1263,7 @@ static struct ab8500_regulator_info
.name = "LDO-INTCORE",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_INTCORE,
+ .id = AB8540_LDO_INTCORE,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
.volt_table = ldo_vintcore_voltages,
@@ -1290,7 +1290,7 @@ static struct ab8500_regulator_info
.name = "LDO-TVOUT",
.ops = &ab8500_regulator_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_TVOUT,
+ .id = AB8540_LDO_TVOUT,
.owner = THIS_MODULE,
.n_voltages = 1,
},
@@ -1308,7 +1308,7 @@ static struct ab8500_regulator_info
.name = "LDO-USB",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB9540_LDO_USB,
+ .id = AB8540_LDO_USB,
.owner = THIS_MODULE,
.n_voltages = 1,
},
@@ -1325,7 +1325,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUDIO",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUDIO,
+ .id = AB8540_LDO_AUDIO,
.owner = THIS_MODULE,
.n_voltages = 1,
},
@@ -1339,7 +1339,7 @@ static struct ab8500_regulator_info
.name = "LDO-ANAMIC1",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_ANAMIC1,
+ .id = AB8540_LDO_ANAMIC1,
.owner = THIS_MODULE,
.n_voltages = 1,
},
@@ -1353,7 +1353,7 @@ static struct ab8500_regulator_info
.name = "LDO-ANAMIC2",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_ANAMIC2,
+ .id = AB8540_LDO_ANAMIC2,
.owner = THIS_MODULE,
.n_voltages = 1,
},
@@ -1367,7 +1367,7 @@ static struct ab8500_regulator_info
.name = "LDO-DMIC",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_DMIC,
+ .id = AB8540_LDO_DMIC,
.owner = THIS_MODULE,
.n_voltages = 1,
},
@@ -1385,7 +1385,7 @@ static struct ab8500_regulator_info
.name = "LDO-ANA",
.ops = &ab8500_regulator_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_ANA,
+ .id = AB8540_LDO_ANA,
.owner = THIS_MODULE,
.n_voltages = 1,
},
--
1.7.9.5
next prev parent reply other threads:[~2013-02-04 11:57 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-04 11:53 [PATCH 00/73 v2] Regulators: Bring the AB8500 into the 20th century Lee Jones
2013-02-04 11:53 ` [PATCH 01/73] regulator: ab8500: Remove VBB from suspend force Lee Jones
2013-02-04 11:53 ` [PATCH 02/73] regulator: ab8500: Initialize Vrf1 regulator Lee Jones
2013-02-04 11:53 ` [PATCH 03/73] regulator: ab8500: Add init values for vsmps1/2 Lee Jones
2013-02-04 11:53 ` [PATCH 04/73] regulator: ab8500: Added SysClkReq1 control of Vpll Lee Jones
2013-02-04 11:53 ` [PATCH 05/73] ARM: ux500: Vsmps3 controlled by SysClkReq1 Lee Jones
2013-02-04 19:37 ` Mark Brown
2013-02-04 21:21 ` Linus Walleij
2013-02-05 12:01 ` Mark Brown
2013-02-05 13:03 ` Lee Jones
2013-02-26 9:44 ` Lee Jones
2013-02-26 10:16 ` Bengt Jönsson
2013-02-26 12:50 ` Mark Brown
2013-02-04 11:53 ` [PATCH 06/73] regulator: ab8500: Add set_mode/get_mode support Lee Jones
2013-02-04 11:53 ` [PATCH 07/73] regulator: ab8500: Fix for regulator_set_mode functionality Lee Jones
2013-02-04 19:38 ` Mark Brown
2013-02-04 11:53 ` [PATCH 08/73] regulator: ab8500: Added get_optimum_mode on regulators with idle mode Lee Jones
2013-02-04 11:53 ` [PATCH 09/73] ARM: ux500: regulators: Add mask for configuration Lee Jones
2013-02-04 11:53 ` [PATCH 10/73] regulator: ab8500: Added more configurable bits Lee Jones
2013-02-04 11:53 ` [PATCH 11/73] regulator: ab8500: Removed initialization of body biasing Lee Jones
2013-02-04 11:53 ` [PATCH 12/73] regulator: core: Show consumers that hold a regulator in Sysfs Lee Jones
2013-02-04 19:41 ` Mark Brown
2013-02-04 11:53 ` [PATCH 13/73] regulator: ab8500: Separate regulator and MFD platform data Lee Jones
2013-02-04 11:53 ` [PATCH 14/73] regulator: ab8500: Add support of low voltage battery Lee Jones
2013-02-04 11:53 ` [PATCH 15/73] ARM: ux500: Update displays in vaux1 consumer list Lee Jones
2013-02-04 11:53 ` [PATCH 16/73] regulator: ab8500-ext: Cosmetic changes Lee Jones
2013-02-04 11:53 ` [PATCH 17/73] regulator: ab8500-ext: Add HW request support Lee Jones
2013-02-04 11:53 ` [PATCH 18/73] regulator: ab8500-ext: Add suspend support Lee Jones
2013-02-04 11:53 ` [PATCH 19/73] regulator: ab8500-ext: Add regulator_set_mode/get_mode Lee Jones
2013-02-04 11:53 ` [PATCH 20/73] regulator: ab8500-ext: Add VextSupply1 regulator Lee Jones
2013-02-04 11:53 ` [PATCH 21/73] regulator: ab8500-ext: Add VextSupply2 regulator Lee Jones
2013-02-04 11:53 ` [PATCH 22/73] regulator: ab8500: Remove USB regulator Lee Jones
2013-02-04 11:53 ` [PATCH 23/73] regulator: ab8500: Init debug from regulator driver Lee Jones
2013-02-04 11:53 ` [PATCH 24/73] ARM: ux500: Add supply for the L3G4200D Gyroscope Lee Jones
2013-02-04 11:53 ` [PATCH 25/73] ARM: ux500: Add supply for the Proximity and Hal sensor Lee Jones
2013-02-04 11:53 ` [PATCH 26/73] ARM: ux500: Add supply for the Ambient light sensor device Lee Jones
2013-02-04 11:53 ` [PATCH 27/73] ARM: ux500: Add supply for the Pressure sensor Lee Jones
2013-02-04 11:53 ` [PATCH 28/73] ARM: ux500: Add supply for the Cypress TrueTouch Touchscreen Lee Jones
2013-02-04 11:53 ` [PATCH 29/73] ARM: ux500: Add supply for the MMIO Camera Lee Jones
2013-02-04 11:53 ` [PATCH 30/73] regulator: ab8500: Remove Vsafe voltage settings Lee Jones
2013-02-04 11:53 ` [PATCH 31/73] regulator: ab8500: Remove Vsafe settings Lee Jones
2013-02-04 11:53 ` [PATCH 32/73] regulator: ab8500: Clean out SoC registers Lee Jones
2013-02-04 11:53 ` [PATCH 33/73] regulator: ab8500: Add support for the AB9540 Lee Jones
2013-02-04 11:53 ` [PATCH 34/73] regulator: ab8500: Correct TVOUT regulator start-up delay Lee Jones
2013-02-04 11:53 ` [PATCH 35/73] regulator: ab8500-ext: Add support for AB8505/AB9540 Lee Jones
2013-02-04 11:53 ` [PATCH 36/73] ARM: ux500: Partially revert changes surrounding audio regulators Lee Jones
2013-02-04 11:53 ` [PATCH 37/73] regulator: ab8500: add support for ab8505 Lee Jones
2013-02-04 11:53 ` [PATCH 38/73] ARM: ux500: regulator: Use device IDs instead of device names Lee Jones
2013-02-04 11:53 ` [PATCH 39/73] regulator: ab8500-ext: Add support for AB9540 regulators Lee Jones
2013-02-04 11:53 ` [PATCH 40/73] regulator: ab8500: Add AB8505 register initialization Lee Jones
2013-02-04 11:53 ` [PATCH 41/73] regulator: ab8500: Provide full settings for AB8540 regulators Lee Jones
2013-02-04 11:53 ` [PATCH 42/73] regulator: ab8500: Correct init mask for AB8540 Lee Jones
2013-02-04 11:53 ` [PATCH 43/73] regulator: ab8500: Add VSDIO definition for the AB8540 Lee Jones
2013-02-04 11:53 ` [PATCH 44/73] regulator: ab8500: Vaux5/6 cannot be disabled on " Lee Jones
2013-02-04 11:54 ` [PATCH 45/73] regulator: ab8500: Update voltage handling for fixed voltage regulators Lee Jones
2013-02-04 11:54 ` [PATCH 46/73] regulator: ab8500: Delete useless fixed_uV field Lee Jones
2013-02-04 11:54 ` [PATCH 47/73] regulator: ab8500: Update AB9540 init masks Lee Jones
2013-02-04 11:54 ` [PATCH 48/73] regulator: ab8500: Use regulator_list_voltage_table() Lee Jones
2013-02-04 11:54 ` [PATCH 49/73] regulator: ab8500: Fix vsdio parameters for AB8540 based platforms Lee Jones
2013-02-04 11:54 ` Lee Jones [this message]
2013-02-04 11:54 ` [PATCH 51/73] regulator: ab8500: Regulator vaux8 not declared using correct name Lee Jones
2013-02-04 11:54 ` [PATCH 52/73] ARM ux500: Remove external regulators from AB8505 init data Lee Jones
2013-02-05 15:22 ` Linus Walleij
2013-02-04 11:54 ` [PATCH 53/73] regulator: ab8500: Don't register external regulators on AB8505 Lee Jones
2013-02-04 11:54 ` [PATCH 54/73] regulator: ab8500: Add voltage selection for AUDIO and ANA " Lee Jones
2013-02-04 11:54 ` [PATCH 55/73] regulator: ab8500: Provide ExtSupply register init values for AB8505 Lee Jones
2013-02-04 11:54 ` [PATCH 56/73] regulator: ab8500: Also check for AB8505 based platforms Lee Jones
2013-02-04 11:54 ` [PATCH 57/73] regulator: ab8500: Remove surplus include of id.h Lee Jones
2013-02-04 11:54 ` [PATCH 58/73] regulator: ab8500: Add new operations for Vaux3 Lee Jones
2013-02-04 11:54 ` [PATCH 59/73] regulator: ab8500: Change mode fix for LDO USB Lee Jones
2013-02-04 11:54 ` [PATCH 60/73] ARM: ux500: regulators: Add LDO USB consumer Lee Jones
2013-02-05 15:21 ` Linus Walleij
2013-02-04 11:54 ` [PATCH 61/73] regulator: ab8500: Default value on LDO USB to HP Lee Jones
2013-02-04 11:54 ` [PATCH 62/73] regulator: ab8500: Remove vusb from AB8540 regulator framework Lee Jones
2013-02-04 11:54 ` [PATCH 63/73] regulator: ab8500: Add mode operation for v-amic Lee Jones
2013-02-04 11:54 ` [PATCH 64/73] regulator: ab8500: Update vdmic, vamic[1|2] parameters for AB8540 Lee Jones
2013-02-04 11:54 ` [PATCH 65/73] regulator: ab8500: Update VAna supply management for the AB9540 Lee Jones
2013-02-04 11:54 ` [PATCH 66/73] regulator: ab8500-ext: Adapt regulator registration for newly changed API Lee Jones
2013-02-04 11:54 ` [PATCH 67/73] regulator: ab8500: Use a struct to select the good regulator configuration Lee Jones
2013-02-04 11:54 ` [PATCH 68/73] regulator: ab8500: Provide DT support for additional platforms Lee Jones
2013-02-04 11:54 ` [PATCH 69/73] regulator: ab8500: Introduce aux5, aux6 regulators for AB8540 Lee Jones
2013-02-04 11:54 ` [PATCH 70/73] regulator: ab8500: Set enable enable_time in regulator_desc Lee Jones
2013-02-04 11:54 ` [PATCH 71/73] regulator: ab8500: Remove the need for a 'delay' property Lee Jones
2013-02-04 11:54 ` [PATCH 72/73] regulator: ab8500: Use regulator_list_voltage_table() to look-up voltages Lee Jones
2013-02-04 11:54 ` [PATCH 73/73] ARM: ux500: Pass regulator platform data using the new format Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359978868-28736-51-git-send-email-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marcus.xm.cooper@stericsson.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®