mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: David Daney <ddaney.cavm@gmail.com>
To: linux-mips@linux-mips.org, ralf@linux-mips.org,
	kvm@vger.kernel.org, Sanjay Lal <sanjayl@kymasys.com>
Cc: linux-kernel@vger.kernel.org, David Daney <david.daney@cavium.com>
Subject: [PATCH 04/31] mips/kvm: Add casts to avoid pointer width mismatch build failures.
Date: Fri,  7 Jun 2013 16:03:08 -0700	[thread overview]
Message-ID: <1370646215-6543-5-git-send-email-ddaney.cavm@gmail.com> (raw)
In-Reply-To: <1370646215-6543-1-git-send-email-ddaney.cavm@gmail.com>

From: David Daney <david.daney@cavium.com>

When building for 64-bits we need these cases to make it build.

Signed-off-by: David Daney <david.daney@cavium.com>
---
 arch/mips/kvm/kvm_mips.c          | 4 ++--
 arch/mips/kvm/kvm_mips_dyntrans.c | 4 ++--
 arch/mips/kvm/kvm_mips_emul.c     | 2 +-
 arch/mips/kvm/kvm_tlb.c           | 4 ++--
 4 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/mips/kvm/kvm_mips.c b/arch/mips/kvm/kvm_mips.c
index d934b01..6018e2a 100644
--- a/arch/mips/kvm/kvm_mips.c
+++ b/arch/mips/kvm/kvm_mips.c
@@ -303,7 +303,7 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id)
 	}
 
 	/* Save Linux EBASE */
-	vcpu->arch.host_ebase = (void *)read_c0_ebase();
+	vcpu->arch.host_ebase = (void *)(long)(read_c0_ebase() & 0x3ff);
 
 	gebase = kzalloc(ALIGN(size, PAGE_SIZE), GFP_KERNEL);
 
@@ -339,7 +339,7 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id)
 	offset = 0x2000;
 	kvm_info("Installing KVM Exception handlers @ %p, %#x bytes\n",
 		 gebase + offset,
-		 mips32_GuestExceptionEnd - mips32_GuestException);
+		 (unsigned)(mips32_GuestExceptionEnd - mips32_GuestException));
 
 	memcpy(gebase + offset, mips32_GuestException,
 	       mips32_GuestExceptionEnd - mips32_GuestException);
diff --git a/arch/mips/kvm/kvm_mips_dyntrans.c b/arch/mips/kvm/kvm_mips_dyntrans.c
index 96528e2..dd0b8f9 100644
--- a/arch/mips/kvm/kvm_mips_dyntrans.c
+++ b/arch/mips/kvm/kvm_mips_dyntrans.c
@@ -94,7 +94,7 @@ kvm_mips_trans_mfc0(uint32_t inst, uint32_t *opc, struct kvm_vcpu *vcpu)
 						      cop0);
 	}
 
-	if (KVM_GUEST_KSEGX(opc) == KVM_GUEST_KSEG0) {
+	if (KVM_GUEST_KSEGX((unsigned long)opc) == KVM_GUEST_KSEG0) {
 		kseg0_opc =
 		    CKSEG0ADDR(kvm_mips_translate_guest_kseg0_to_hpa
 			       (vcpu, (unsigned long) opc));
@@ -129,7 +129,7 @@ kvm_mips_trans_mtc0(uint32_t inst, uint32_t *opc, struct kvm_vcpu *vcpu)
 	    offsetof(struct mips_coproc,
 		     reg[rd][sel]) + offsetof(struct kvm_mips_commpage, cop0);
 
-	if (KVM_GUEST_KSEGX(opc) == KVM_GUEST_KSEG0) {
+	if (KVM_GUEST_KSEGX((unsigned long)opc) == KVM_GUEST_KSEG0) {
 		kseg0_opc =
 		    CKSEG0ADDR(kvm_mips_translate_guest_kseg0_to_hpa
 			       (vcpu, (unsigned long) opc));
diff --git a/arch/mips/kvm/kvm_mips_emul.c b/arch/mips/kvm/kvm_mips_emul.c
index 4b6274b..af9a661 100644
--- a/arch/mips/kvm/kvm_mips_emul.c
+++ b/arch/mips/kvm/kvm_mips_emul.c
@@ -892,7 +892,7 @@ int kvm_mips_sync_icache(unsigned long va, struct kvm_vcpu *vcpu)
 	pfn = kvm->arch.guest_pmap[gfn];
 	pa = (pfn << PAGE_SHIFT) | offset;
 
-	printk("%s: va: %#lx, unmapped: %#x\n", __func__, va, CKSEG0ADDR(pa));
+	printk("%s: va: %#lx, unmapped: %#lx\n", __func__, va, CKSEG0ADDR(pa));
 
 	mips32_SyncICache(CKSEG0ADDR(pa), 32);
 	return 0;
diff --git a/arch/mips/kvm/kvm_tlb.c b/arch/mips/kvm/kvm_tlb.c
index c777dd3..5e189be 100644
--- a/arch/mips/kvm/kvm_tlb.c
+++ b/arch/mips/kvm/kvm_tlb.c
@@ -353,7 +353,7 @@ int kvm_mips_handle_commpage_tlb_fault(unsigned long badvaddr,
 	unsigned long entrylo0 = 0, entrylo1 = 0;
 
 
-	pfn0 = CPHYSADDR(vcpu->arch.kseg0_commpage) >> PAGE_SHIFT;
+	pfn0 = CPHYSADDR((unsigned long)vcpu->arch.kseg0_commpage) >> PAGE_SHIFT;
 	pfn1 = 0;
 	entrylo0 = mips3_paddr_to_tlbpfn(pfn0 << PAGE_SHIFT) | (0x3 << 3) | (1 << 2) |
 			(0x1 << 1);
@@ -916,7 +916,7 @@ uint32_t kvm_get_inst(uint32_t *opc, struct kvm_vcpu *vcpu)
 			inst = *(opc);
 		}
 		local_irq_restore(flags);
-	} else if (KVM_GUEST_KSEGX(opc) == KVM_GUEST_KSEG0) {
+	} else if (KVM_GUEST_KSEGX((unsigned long)opc) == KVM_GUEST_KSEG0) {
 		paddr =
 		    kvm_mips_translate_guest_kseg0_to_hpa(vcpu,
 							 (unsigned long) opc);
-- 
1.7.11.7


  parent reply	other threads:[~2013-06-07 23:13 UTC|newest]

Thread overview: 81+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-07 23:03 [PATCH 00/31] KVM/MIPS: Implement hardware virtualization via the MIPS-VZ extensions David Daney
2013-06-07 23:03 ` [PATCH 01/31] MIPS: Move allocate_kscratch to cpu-probe.c and make it public David Daney
2013-06-14 11:41   ` Ralf Baechle
2013-06-14 13:11     ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 02/31] MIPS: Save and restore K0/K1 when CONFIG_KVM_MIPSVZ David Daney
2013-06-07 23:03 ` [PATCH 03/31] mips/kvm: Fix 32-bitisms in kvm_locore.S David Daney
2013-06-14 13:09   ` Ralf Baechle
2013-06-14 13:21     ` Sergei Shtylyov
2013-06-07 23:03 ` David Daney [this message]
2013-06-14 13:14   ` [PATCH 04/31] mips/kvm: Add casts to avoid pointer width mismatch build failures Ralf Baechle
2013-06-07 23:03 ` [PATCH 05/31] mips/kvm: Use generic cache flushing functions David Daney
2013-06-14 13:17   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 06/31] mips/kvm: Rename kvm_vcpu_arch.pc to kvm_vcpu_arch.epc David Daney
2013-06-14 13:18   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 07/31] mips/kvm: Rename VCPU_registername to KVM_VCPU_ARCH_registername David Daney
2013-06-14 13:18   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 08/31] mips/kvm: Fix code formatting in arch/mips/kvm/kvm_locore.S David Daney
2013-06-14 13:21   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 09/31] mips/kvm: Factor trap-and-emulate support into a pluggable implementation David Daney
2013-06-14 13:22   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 10/31] mips/kvm: Implement ioctls to get and set FPU registers David Daney
2013-06-14 16:11   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 11/31] MIPS: Rearrange branch.c so it can be used by kvm code David Daney
2013-06-14 22:03   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 12/31] MIPS: Add instruction format information for WAIT, MTC0, MFC0, et al David Daney
2013-06-14 22:07   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 13/31] mips/kvm: Add accessors for MIPS VZ registers David Daney
2013-06-14 22:10   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 14/31] mips/kvm: Add thread_info flag to indicate operation in MIPS VZ Guest Mode David Daney
2013-06-14 22:10   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 15/31] mips/kvm: Exception handling to leave and reenter guest mode David Daney
2013-06-15 10:00   ` Ralf Baechle
2013-10-11 12:51   ` James Hogan
2013-06-07 23:03 ` [PATCH 16/31] mips/kvm: Add exception handler for MIPSVZ Guest exceptions David Daney
2013-06-15 10:23   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 17/31] MIPS: Quit exposing Kconfig symbols in uapi headers David Daney
2013-06-14 11:12   ` Ralf Baechle
2013-06-15 17:13   ` Paolo Bonzini
2013-06-07 23:03 ` [PATCH 18/31] mips/kvm: Add pt_regs slots for BadInstr and BadInstrP David Daney
2013-06-15 10:25   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 19/31] mips/kvm: Add host definitions for MIPS VZ based host David Daney
2013-06-16  8:49   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 20/31] mips/kvm: Hook into TLB fault handlers David Daney
2013-06-07 23:34   ` Sergei Shtylyov
2013-06-08  0:15     ` David Daney
2013-06-16  8:51   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 21/31] mips/kvm: Allow set_except_vector() to be used from MIPSVZ code David Daney
2013-06-16 11:22   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 22/31] mips/kvm: Split get_new_mmu_context into two parts David Daney
2013-06-16 11:26   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 23/31] mips/kvm: Hook into CP unusable exception handler David Daney
2013-06-16 11:28   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 24/31] mips/kvm: Add thread_struct fields used by MIPSVZ hosts David Daney
2013-06-16 11:29   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 25/31] mips/kvm: Add some asm-offsets constants used by MIPSVZ David Daney
2013-06-16 11:31   ` Ralf Baechle
2013-08-06 17:23     ` David Daney
2013-06-07 23:03 ` [PATCH 26/31] mips/kvm: Split up Kconfig and Makefile definitions in preperation for MIPSVZ David Daney
2013-06-16 11:33   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 27/31] mips/kvm: Gate the use of kvm_local_flush_tlb_all() by KVM_MIPSTE David Daney
2013-06-16 11:42   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 28/31] mips/kvm: Only use KVM_COALESCED_MMIO_PAGE_OFFSET with KVM_MIPSTE David Daney
2013-06-16 12:03   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 29/31] mips/kvm: Add MIPSVZ support David Daney
2013-06-16 11:47   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 30/31] mips/kvm: Enable MIPSVZ in Kconfig/Makefile David Daney
2013-06-16 11:44   ` Ralf Baechle
2013-06-07 23:03 ` [PATCH 31/31] mips/kvm: Allow for upto 8 KVM vcpus per vm David Daney
2013-06-16 11:37   ` Ralf Baechle
2013-06-07 23:15 ` [PATCH 00/31] KVM/MIPS: Implement hardware virtualization via the MIPS-VZ extensions David Daney
2013-06-09  7:31   ` Gleb Natapov
2013-06-09 23:23     ` David Daney
2013-06-09 23:40       ` Maciej W. Rozycki
2013-06-10 11:16         ` Ralf Baechle
2013-06-10  6:18       ` Gleb Natapov
2013-06-10 16:37       ` Sanjay Lal
2013-06-16 11:59       ` Ralf Baechle
2013-06-10 16:43 ` Sanjay Lal
2013-06-10 17:14   ` David Daney
2013-06-14 11:12 ` Ralf Baechle
2013-06-19  9:06 ` Ralf Baechle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1370646215-6543-5-git-send-email-ddaney.cavm@gmail.com \
    --to=ddaney.cavm@gmail.com \
    --cc=david.daney@cavium.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    --cc=sanjayl@kymasys.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®