From: Wei Ni <wni@nvidia.com>
To: <khali@linux-fr.org>, <linux@roeck-us.net>
Cc: <broonie@kernel.org>, <swarren@wwwdotorg.org>,
<lm-sensors@lm-sensors.org>, <linux-tegra@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, Wei Ni <wni@nvidia.com>
Subject: [PATCH v3 2/2] Documentation: dt: hwmon: add OF document for LM90
Date: Mon, 9 Sep 2013 18:29:12 +0800 [thread overview]
Message-ID: <1378722552-10357-3-git-send-email-wni@nvidia.com> (raw)
In-Reply-To: <1378722552-10357-1-git-send-email-wni@nvidia.com>
Add OF document for LM90 in Documentation/devicetree/.
Signed-off-by: Wei Ni <wni@nvidia.com>
---
Documentation/devicetree/bindings/hwmon/lm90.txt | 44 ++++++++++++++++++++++
1 file changed, 44 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/lm90.txt
diff --git a/Documentation/devicetree/bindings/hwmon/lm90.txt b/Documentation/devicetree/bindings/hwmon/lm90.txt
new file mode 100644
index 0000000..5570875
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lm90.txt
@@ -0,0 +1,44 @@
+* LM90 series thermometer.
+
+Required node properties:
+- compatible: manufacture and chip name, one of
+ "<manufacture>,adm1032"
+ "<manufacture>,adt7461"
+ "<manufacture>,adt7461a"
+ "<manufacture>,g781"
+ "<manufacture>,lm90"
+ "<manufacture>,lm86"
+ "<manufacture>,lm89"
+ "<manufacture>,lm99"
+ "<manufacture>,max6646"
+ "<manufacture>,max6647"
+ "<manufacture>,max6649"
+ "<manufacture>,max6657"
+ "<manufacture>,max6658"
+ "<manufacture>,max6659"
+ "<manufacture>,max6680"
+ "<manufacture>,max6681"
+ "<manufacture>,max6695"
+ "<manufacture>,max6696"
+ "<manufacture>,nct1008"
+ "<manufacture>,w83l771"
+ "<manufacture>,sa56004"
+
+- reg: I2C bus address of the device
+
+Optional properties:
+- vcc-supply: vcc regulator for the supply voltage.
+ If this is not set, assuming vdd is always powered.
+- interrupts: Contains a single interrupt specifier which describes the
+ LM90 pin6 output.
+ See interrupt-controller/interrupts.txt for the format.
+
+Example LM90 node:
+
+temp-sensor {
+ compatible = "onnn,nct1008";
+ reg = <0x4c>;
+ vcc-supply = <&palmas_ldo6_reg>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+}
--
1.7.9.5
next prev parent reply other threads:[~2013-09-09 10:29 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-09 10:29 [PATCH v3 0/2] Add power control for lm90 Wei Ni
2013-09-09 10:29 ` [PATCH v3 1/2] hwmon: (lm90) Add power control Wei Ni
2013-09-09 11:12 ` Mark Brown
2013-09-09 11:34 ` Guenter Roeck
2013-09-09 13:50 ` Mark Brown
2013-09-09 15:50 ` Guenter Roeck
2013-09-09 16:02 ` Mark Brown
2013-09-09 16:17 ` Guenter Roeck
2013-09-09 20:39 ` Mark Brown
2013-09-10 4:05 ` Wei Ni
2013-09-10 4:50 ` Guenter Roeck
2013-09-10 5:39 ` Wei Ni
2013-09-10 5:54 ` Guenter Roeck
2013-09-10 6:30 ` Wei Ni
2013-09-10 10:13 ` Mark Brown
2013-09-10 11:29 ` Wei Ni
2013-09-10 12:11 ` Mark Brown
2013-09-11 9:40 ` Wei Ni
2013-09-10 3:22 ` Wei Ni
2013-09-10 3:36 ` Guenter Roeck
2013-09-10 3:40 ` Stephen Warren
2013-09-10 3:53 ` Guenter Roeck
2013-09-10 4:12 ` Wei Ni
2013-09-10 4:13 ` Stephen Warren
2013-09-10 4:44 ` Guenter Roeck
2013-09-10 10:09 ` Mark Brown
2013-09-10 15:07 ` Stephen Warren
2013-09-10 17:04 ` Mark Brown
2013-09-10 17:44 ` Stephen Warren
2013-09-10 18:07 ` Guenter Roeck
2013-09-10 18:18 ` Mark Brown
2013-09-10 18:37 ` Stephen Warren
2013-09-10 18:52 ` Mark Brown
2013-09-11 11:35 ` Wei Ni
2013-09-10 17:05 ` Mark Brown
2013-09-09 10:29 ` Wei Ni [this message]
2013-09-09 10:52 ` [PATCH v3 2/2] Documentation: dt: hwmon: add OF document for LM90 Guenter Roeck
2013-09-09 22:14 ` Stephen Warren
2013-09-10 4:25 ` Wei Ni
2013-09-09 10:57 ` Ramkumar Ramachandra
2013-09-10 4:35 ` Wei Ni
2013-09-10 4:36 ` Wei Ni
2013-09-09 22:15 ` Stephen Warren
2013-09-09 22:23 ` Guenter Roeck
2013-09-10 4:25 ` Wei Ni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1378722552-10357-3-git-send-email-wni@nvidia.com \
--to=wni@nvidia.com \
--cc=broonie@kernel.org \
--cc=khali@linux-fr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome