mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Denys Vlasenko <dvlasenk@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Denys Vlasenko <dvlasenk@redhat.com>,
	Oleg Nesterov <oleg@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
	Andy Lutomirski <luto@amacapital.net>,
	Frederic Weisbecker <fweisbec@gmail.com>, X86 ML <x86@kernel.org>,
	Alexei Starovoitov <ast@plumgrid.com>,
	Will Drewry <wad@chromium.org>, Kees Cook <keescook@chromium.org>
Subject: [PATCH 2/5] x86: open-code register save/restore in trace_hardirqs thunks
Date: Fri,  1 Aug 2014 16:48:15 +0200	[thread overview]
Message-ID: <1406904498-21647-2-git-send-email-dvlasenk@redhat.com> (raw)
In-Reply-To: <1406904498-21647-1-git-send-email-dvlasenk@redhat.com>

This is a preparatory patch for change in "struct pt_regs"
handling in entry_64.S.

trace_hardirqs thunks were (ab)using a part of pt_regs
handling code, namely SAVE_ARGS/RESTORE_ARGS macros,
to save/restore registers across C function calls.

Since SAVE_ARGS is going to be changed, open-code
register saving/restoring here.

Incidentally, this removes a bit of dead code:
one SAVE_ARGS was just to emit a CFI annotation,
but it also generated unreachable assembly insns.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: Oleg Nesterov <oleg@redhat.com>
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: X86 ML <x86@kernel.org>
CC: Alexei Starovoitov <ast@plumgrid.com>
CC: Will Drewry <wad@chromium.org>
CC: Kees Cook <keescook@chromium.org>
CC: linux-kernel@vger.kernel.org
---
 arch/x86/lib/thunk_64.S | 29 ++++++++++++++++++++++++-----
 1 file changed, 24 insertions(+), 5 deletions(-)

diff --git a/arch/x86/lib/thunk_64.S b/arch/x86/lib/thunk_64.S
index 92d9fea..c1c9131 100644
--- a/arch/x86/lib/thunk_64.S
+++ b/arch/x86/lib/thunk_64.S
@@ -16,10 +16,20 @@
 \name:
 	CFI_STARTPROC
 
-	/* this one pushes 9 elems, the next one would be %rIP */
-	SAVE_ARGS
+	subq  $9*8, %rsp
+	CFI_ADJUST_CFA_OFFSET 9*8
+	movq_cfi rdi, 8*8
+	movq_cfi rsi, 7*8
+	movq_cfi rdx, 6*8
+	movq_cfi rcx, 5*8
+	movq_cfi rax, 4*8
+	movq_cfi r8,  3*8
+	movq_cfi r9,  2*8
+	movq_cfi r10, 1*8
+	movq_cfi r11, 0*8
 
 	.if \put_ret_addr_in_rdi
+	/* 9*8(%rsp) is return addr on stack */
 	movq_cfi_restore 9*8, rdi
 	.endif
 
@@ -38,11 +48,20 @@
 	THUNK lockdep_sys_exit_thunk,lockdep_sys_exit
 #endif
 
-	/* SAVE_ARGS below is used only for the .cfi directives it contains. */
 	CFI_STARTPROC
-	SAVE_ARGS
+	CFI_ADJUST_CFA_OFFSET 9*8
 restore:
-	RESTORE_ARGS
+	movq_cfi_restore 0*8, r11
+	movq_cfi_restore 1*8, r10
+	movq_cfi_restore 2*8, r9
+	movq_cfi_restore 3*8, r8
+	movq_cfi_restore 4*8, rax
+	movq_cfi_restore 5*8, rcx
+	movq_cfi_restore 6*8, rdx
+	movq_cfi_restore 7*8, rsi
+	movq_cfi_restore 8*8, rdi
+	addq 9*8, %rsp
+	CFI_ADJUST_CFA_OFFSET -9*8
 	ret
 	CFI_ENDPROC
 	_ASM_NOKPROBE(restore)
-- 
1.8.1.4


  reply	other threads:[~2014-08-01 14:49 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-01 14:48 [PATCH 1/5] x86: entry_64.S: delete unused code Denys Vlasenko
2014-08-01 14:48 ` Denys Vlasenko [this message]
2014-08-01 14:48 ` [PATCH 3/5] x86: entry_64.S: fold SAVE_ARGS_IRQ macro into its sole user Denys Vlasenko
2014-08-01 18:30   ` Frederic Weisbecker
2014-08-01 14:48 ` [PATCH 4/5] x86: entry_64.S: always allocate complete "struct pt_regs" Denys Vlasenko
2014-08-01 17:04   ` Andy Lutomirski
2014-08-04 14:28     ` Denys Vlasenko
2014-08-04 14:47       ` Oleg Nesterov
2014-08-04 15:34         ` Oleg Nesterov
2014-08-04 21:03       ` Andy Lutomirski
2014-08-04 21:23         ` Borislav Petkov
2014-08-05 10:35         ` Denys Vlasenko
2014-08-05 14:53           ` Andy Lutomirski
2014-08-05 15:17             ` Denys Vlasenko
2014-08-05 23:02               ` Andy Lutomirski
2014-08-07  9:54             ` Denys Vlasenko
2014-08-01 18:09   ` Alexei Starovoitov
2014-08-01 18:30   ` Oleg Nesterov
2014-08-01 18:35   ` H. Peter Anvin
2014-08-01 22:11     ` Denys Vlasenko
2014-08-01 22:13       ` H. Peter Anvin
2014-08-02 21:14         ` Andy Lutomirski
2014-08-02 21:23           ` H. Peter Anvin
2014-08-02 21:38             ` Andy Lutomirski
2014-08-01 22:52   ` Frederic Weisbecker
2014-08-01 23:19   ` Frederic Weisbecker
2014-08-04  3:03     ` Denys Vlasenko
2014-08-04  7:57       ` Borislav Petkov
2014-08-11  0:46       ` Frederic Weisbecker
2014-08-11  8:40         ` Jan Beulich
2014-08-11  9:07           ` Andy Lutomirski
2014-08-11  9:31             ` Jan Beulich
2014-08-11 13:26           ` Denys Vlasenko
2014-08-11 14:17             ` Jan Beulich
2014-08-11 14:53               ` H. Peter Anvin
2014-08-11 15:08                 ` Jan Beulich
2014-08-11 15:13                   ` H. Peter Anvin
2014-08-12  9:31                     ` Denys Vlasenko
2014-08-12  9:50                       ` Jan Beulich
2014-08-01 14:48 ` [PATCH 5/5] x86: mass removal of ARGOFFSET Denys Vlasenko
2014-08-01 18:00 ` [PATCH 1/5] x86: entry_64.S: delete unused code Frederic Weisbecker

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1406904498-21647-2-git-send-email-dvlasenk@redhat.com \
    --to=dvlasenk@redhat.com \
    --cc=ast@plumgrid.com \
    --cc=fweisbec@gmail.com \
    --cc=hpa@zytor.com \
    --cc=keescook@chromium.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luto@amacapital.net \
    --cc=oleg@redhat.com \
    --cc=wad@chromium.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®