From: Kishon Vijay Abraham I <kishon@ti.com>
To: <gregkh@linuxfoundation.org>
Cc: <kishon@ti.com>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 24/25] Phy: DT binding documentation for the Armada 375 USB cluster binding
Date: Thu, 27 Nov 2014 11:56:16 +0530 [thread overview]
Message-ID: <1417069577-1169-25-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1417069577-1169-1-git-send-email-kishon@ti.com>
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
Armada 375 comes with an USB2 host and device controller and an USB3
controller. The USB cluster control register allows to manage common
features of both USB controllers. This commit adds the Device Tree
binding documentation for this piece of hardware.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
.../devicetree/bindings/phy/phy-mvebu.txt | 21 ++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu.txt b/Documentation/devicetree/bindings/phy/phy-mvebu.txt
index 6cb3364..f95b626 100644
--- a/Documentation/devicetree/bindings/phy/phy-mvebu.txt
+++ b/Documentation/devicetree/bindings/phy/phy-mvebu.txt
@@ -20,3 +20,24 @@ Example:
#phy-cells = <0>;
status = "ok";
};
+
+Armada 375 USB cluster
+----------------------
+
+Armada 375 comes with an USB2 host and device controller and an USB3
+controller. The USB cluster control register allows to manage common
+features of both USB controllers.
+
+Required properties:
+
+- compatible: "marvell,armada-375-usb-cluster"
+- reg: Should contain usb cluster register location and length.
+- #phy-cells : from the generic phy bindings, must be 1. Possible
+values are 1 (USB2), 2 (USB3).
+
+Example:
+ usbcluster: usb-cluster@18400 {
+ compatible = "marvell,armada-375-usb-cluster";
+ reg = <0x18400 0x4>;
+ #phy-cells = <1>
+ };
--
1.7.9.5
next prev parent reply other threads:[~2014-11-27 6:27 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-27 6:25 [GIT PULL 00/25] phy: for 3.19 Kishon Vijay Abraham I
2014-11-27 6:25 ` [PATCH 01/25] phy: Add PHY header file for DT x Driver defines Kishon Vijay Abraham I
2014-11-27 6:25 ` [PATCH 02/25] phy: miphy28lp: Add Device Tree bindings for the MiPHY28lp Kishon Vijay Abraham I
2014-11-27 6:25 ` [PATCH 03/25] phy: miphy28lp: Provide support for the MiPHY28lp Generic PHY Kishon Vijay Abraham I
2014-11-27 7:00 ` sanjeev sharma
2014-11-27 6:25 ` [PATCH 04/25] phy: miphy28lp: Add SSC support for SATA Kishon Vijay Abraham I
2014-11-27 6:25 ` [PATCH 05/25] phy: miphy28lp: Add SSC support for PCIE Kishon Vijay Abraham I
2014-11-27 6:25 ` [PATCH 06/25] phy: miphy28lp: Tune tx impedance across Soc cuts Kishon Vijay Abraham I
2014-11-27 6:25 ` [PATCH 07/25] phy: phy-core: use the np present in of_phandle_args to get the PHY Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 08/25] phy: sun4i: add support for USB phy0 Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 09/25] phy: berlin-sata: Move PHY_BASE into private data struct Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 10/25] phy: berlin-sata: Add support for BG2 SATA PHY Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 11/25] phy: berlin-sata: Document BG2 compatible Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 12/25] phy: add the Berlin USB PHY driver Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 13/25] Documentation: bindings: add doc for the Berlin USB PHY Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 14/25] phy: safer to_phy() macro Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 15/25] phy: improved lookup method Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 16/25] phy: twl4030: use the new " Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 17/25] phy: remove the old " Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 18/25] usb: dwc3: host: convey the PHYs to xhci Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 19/25] phy: exynos5-usbdrd: Add pipe-clk, utmi-clk and itp-clk support Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 20/25] phy: exynos5-usbdrd: Add facility for VBUS-BOOST-5V supply Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 21/25] phy: exynos7-usbdrd: Update dependency for ARCH_EXYNOS Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 22/25] phy: Use PTR_ERR_OR_ZERO to fix warning raised by coccinelle Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 23/25] Phy: DT binding documentation for Marvell MVEBU SATA phy Kishon Vijay Abraham I
2014-11-27 6:26 ` Kishon Vijay Abraham I [this message]
2014-11-27 6:26 ` [PATCH 25/25] phy: add support for USB cluster on the Armada 375 SoC Kishon Vijay Abraham I
2014-11-27 16:49 ` [GIT PULL 00/25] phy: for 3.19 Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417069577-1169-25-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®