From: Kishon Vijay Abraham I <kishon@ti.com>
To: <gregkh@linuxfoundation.org>
Cc: <kishon@ti.com>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 06/25] phy: miphy28lp: Tune tx impedance across Soc cuts
Date: Thu, 27 Nov 2014 11:55:58 +0530 [thread overview]
Message-ID: <1417069577-1169-7-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1417069577-1169-1-git-send-email-kishon@ti.com>
From: Gabriel FERNANDEZ <gabriel.fernandez@st.com>
This patch to compensate tx impedance (Sata, PCIe)
depending on Soc cuts the kernel is built for.
Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
.../devicetree/bindings/phy/phy-miphy28lp.txt | 1 +
drivers/phy/phy-miphy28lp.c | 16 ++++++++++++++++
2 files changed, 17 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt b/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
index 4a3b4af..46a135d 100644
--- a/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
+++ b/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
@@ -40,6 +40,7 @@ Optional properties (port (child) node):
- st,px_rx_pol_inv : to invert polarity of RXn/RXp (respectively negative line and positive
line).
- st,scc-on : enable ssc to reduce effects of EMI (only for sata or PCIe).
+- st,tx-impedance-comp : to compensate tx impedance avoiding out of range values.
example:
diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/phy-miphy28lp.c
index d8ff895..87dcc9a 100644
--- a/drivers/phy/phy-miphy28lp.c
+++ b/drivers/phy/phy-miphy28lp.c
@@ -204,6 +204,7 @@ struct miphy28lp_phy {
bool osc_rdy;
bool px_rx_pol_inv;
bool ssc;
+ bool tx_impedance;
struct reset_control *miphy_rst;
@@ -632,6 +633,12 @@ static void miphy_pcie_tune_ssc(struct miphy28lp_phy *miphy_phy)
}
}
+static inline void miphy_tune_tx_impedance(struct miphy28lp_phy *miphy_phy)
+{
+ /* Compensate Tx impedance to avoid out of range values */
+ writeb_relaxed(0x02, miphy_phy->base + MIPHY_COMP_POSTP);
+}
+
static inline int miphy28lp_configure_sata(struct miphy28lp_phy *miphy_phy)
{
void __iomem *base = miphy_phy->base;
@@ -670,6 +677,9 @@ static inline int miphy28lp_configure_sata(struct miphy28lp_phy *miphy_phy)
if (miphy_phy->ssc)
miphy_sata_tune_ssc(miphy_phy);
+ if (miphy_phy->tx_impedance)
+ miphy_tune_tx_impedance(miphy_phy);
+
return 0;
}
@@ -703,6 +713,9 @@ static inline int miphy28lp_configure_pcie(struct miphy28lp_phy *miphy_phy)
if (miphy_phy->ssc)
miphy_pcie_tune_ssc(miphy_phy);
+ if (miphy_phy->tx_impedance)
+ miphy_tune_tx_impedance(miphy_phy);
+
return 0;
}
@@ -1154,6 +1167,9 @@ static int miphy28lp_of_probe(struct device_node *np,
miphy_phy->ssc = of_property_read_bool(np, "st,ssc-on");
+ miphy_phy->tx_impedance =
+ of_property_read_bool(np, "st,tx-impedance-comp");
+
of_property_read_u32(np, "st,sata-gen", &miphy_phy->sata_gen);
if (!miphy_phy->sata_gen)
miphy_phy->sata_gen = SATA_GEN1;
--
1.7.9.5
next prev parent reply other threads:[~2014-11-27 6:26 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-27 6:25 [GIT PULL 00/25] phy: for 3.19 Kishon Vijay Abraham I
2014-11-27 6:25 ` [PATCH 01/25] phy: Add PHY header file for DT x Driver defines Kishon Vijay Abraham I
2014-11-27 6:25 ` [PATCH 02/25] phy: miphy28lp: Add Device Tree bindings for the MiPHY28lp Kishon Vijay Abraham I
2014-11-27 6:25 ` [PATCH 03/25] phy: miphy28lp: Provide support for the MiPHY28lp Generic PHY Kishon Vijay Abraham I
2014-11-27 7:00 ` sanjeev sharma
2014-11-27 6:25 ` [PATCH 04/25] phy: miphy28lp: Add SSC support for SATA Kishon Vijay Abraham I
2014-11-27 6:25 ` [PATCH 05/25] phy: miphy28lp: Add SSC support for PCIE Kishon Vijay Abraham I
2014-11-27 6:25 ` Kishon Vijay Abraham I [this message]
2014-11-27 6:25 ` [PATCH 07/25] phy: phy-core: use the np present in of_phandle_args to get the PHY Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 08/25] phy: sun4i: add support for USB phy0 Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 09/25] phy: berlin-sata: Move PHY_BASE into private data struct Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 10/25] phy: berlin-sata: Add support for BG2 SATA PHY Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 11/25] phy: berlin-sata: Document BG2 compatible Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 12/25] phy: add the Berlin USB PHY driver Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 13/25] Documentation: bindings: add doc for the Berlin USB PHY Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 14/25] phy: safer to_phy() macro Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 15/25] phy: improved lookup method Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 16/25] phy: twl4030: use the new " Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 17/25] phy: remove the old " Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 18/25] usb: dwc3: host: convey the PHYs to xhci Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 19/25] phy: exynos5-usbdrd: Add pipe-clk, utmi-clk and itp-clk support Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 20/25] phy: exynos5-usbdrd: Add facility for VBUS-BOOST-5V supply Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 21/25] phy: exynos7-usbdrd: Update dependency for ARCH_EXYNOS Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 22/25] phy: Use PTR_ERR_OR_ZERO to fix warning raised by coccinelle Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 23/25] Phy: DT binding documentation for Marvell MVEBU SATA phy Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 24/25] Phy: DT binding documentation for the Armada 375 USB cluster binding Kishon Vijay Abraham I
2014-11-27 6:26 ` [PATCH 25/25] phy: add support for USB cluster on the Armada 375 SoC Kishon Vijay Abraham I
2014-11-27 16:49 ` [GIT PULL 00/25] phy: for 3.19 Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417069577-1169-7-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome