From: Feng Wu <feng.wu@intel.com>
To: kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: pbonzini@redhat.com, alex.williamson@redhat.com, joro@8bytes.org,
eric.auger@linaro.org, feng.wu@intel.com
Subject: [v5 00/19] Add VT-d Posted-Interrupts support
Date: Mon, 13 Jul 2015 17:47:16 +0800 [thread overview]
Message-ID: <1436780855-3617-1-git-send-email-feng.wu@intel.com> (raw)
VT-d Posted-Interrupts is an enhancement to CPU side Posted-Interrupt.
With VT-d Posted-Interrupts enabled, external interrupts from
direct-assigned devices can be delivered to guests without VMM
intervention when guest is running in non-root mode.
You can find the VT-d Posted-Interrtups Spec. in the following URL:
http://www.intel.com/content/www/us/en/intelligent-systems/intel-technology/vt-directed-io-spec.html
This series was part of http://thread.gmane.org/gmane.linux.kernel.iommu/7708. To make things clear, send out IOMMU part here.
This patch-set is based on the lastest x86/apic branch of tip tree.
Divide the whole series which contain multiple components into three parts:
- Prerequisite changes to irq subsystem (already merged)
- IOMMU part (already merged)
- KVM and VFIO parts (this series)
v5:
- Based on Alex and Eric's irq bypass manager:
https://lkml.org/lkml/2015/7/10/663
- Reuse some common patch from Eric
Eric Auger (3):
KVM: create kvm_irqfd.h
KVM: eventfd: add irq bypass information in irqfd
KVM: eventfd: add irq bypass consumer management
Feng Wu (16):
KVM: Extend struct pi_desc for VT-d Posted-Interrupts
KVM: Add some helper functions for Posted-Interrupts
KVM: Define a new interface kvm_intr_is_single_vcpu()
KVM: Get Posted-Interrupts descriptor address from struct kvm_vcpu
KVM: Add interfaces to control PI outside vmx
KVM: Make struct kvm_irq_routing_table accessible
KVM: make kvm_set_msi_irq() public
vfio: Select IRQ_BYPASS_MANAGER for vfio PCI devices
vfio: Register/unregister irq_bypass_producer
KVM, x86: Select IRQ_BYPASS_MANAGER for KVM_INTEL
KVM: x86: Update IRTE for posted-interrupts
KVM: x86: Add arch specific routines for irqbypass manager
KVM: Add an arch specific hooks in 'struct kvm_kernel_irqfd'
KVM: Update Posted-Interrupts Descriptor when vCPU is preempted
KVM: Update Posted-Interrupts Descriptor when vCPU is blocked
KVM: Warn if 'SN' is set during posting interrupts by software
arch/x86/include/asm/kvm_host.h | 15 ++
arch/x86/kvm/Kconfig | 1 +
arch/x86/kvm/irq_comm.c | 28 +++-
arch/x86/kvm/vmx.c | 278 +++++++++++++++++++++++++++++++++++-
arch/x86/kvm/x86.c | 160 +++++++++++++++++++--
drivers/vfio/pci/Kconfig | 1 +
drivers/vfio/pci/vfio_pci_intrs.c | 19 +++
drivers/vfio/pci/vfio_pci_private.h | 2 +
include/linux/kvm_host.h | 23 +++
include/linux/kvm_irqfd.h | 74 ++++++++++
virt/kvm/eventfd.c | 115 ++++++---------
virt/kvm/irqchip.c | 11 --
virt/kvm/kvm_main.c | 3 +
13 files changed, 632 insertions(+), 98 deletions(-)
create mode 100644 include/linux/kvm_irqfd.h
--
2.1.0
next reply other threads:[~2015-07-13 9:58 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-13 9:47 Feng Wu [this message]
2015-07-13 9:47 ` [v5 01/19] KVM: Extend struct pi_desc for VT-d Posted-Interrupts Feng Wu
2015-07-13 9:47 ` [v5 02/19] KVM: Add some helper functions for Posted-Interrupts Feng Wu
2015-07-13 9:47 ` [v5 03/19] KVM: Define a new interface kvm_intr_is_single_vcpu() Feng Wu
2015-07-13 9:47 ` [v5 04/19] KVM: Get Posted-Interrupts descriptor address from struct kvm_vcpu Feng Wu
2015-07-13 9:47 ` [v5 05/19] KVM: Add interfaces to control PI outside vmx Feng Wu
2015-07-13 9:47 ` [v5 06/19] KVM: Make struct kvm_irq_routing_table accessible Feng Wu
2015-07-13 9:47 ` [v5 07/19] KVM: make kvm_set_msi_irq() public Feng Wu
2015-07-13 9:47 ` [v5 08/19] vfio: Select IRQ_BYPASS_MANAGER for vfio PCI devices Feng Wu
2015-07-13 9:47 ` [v5 09/19] vfio: Register/unregister irq_bypass_producer Feng Wu
2015-07-13 12:55 ` Eric Auger
2015-07-13 18:57 ` Alex Williamson
2015-07-13 9:47 ` [v5 10/19] KVM, x86: Select IRQ_BYPASS_MANAGER for KVM_INTEL Feng Wu
2015-07-13 9:47 ` [v5 11/19] KVM: create kvm_irqfd.h Feng Wu
2015-07-13 9:47 ` [v5 12/19] KVM: eventfd: add irq bypass information in irqfd Feng Wu
2015-07-13 9:47 ` [v5 13/19] KVM: x86: Update IRTE for posted-interrupts Feng Wu
2015-07-13 9:47 ` [v5 14/19] KVM: x86: Add arch specific routines for irqbypass manager Feng Wu
2015-07-13 13:17 ` Eric Auger
2015-07-13 9:47 ` [v5 15/19] KVM: eventfd: add irq bypass consumer management Feng Wu
2015-07-13 13:16 ` Eric Auger
2015-07-13 13:47 ` Paolo Bonzini
2015-07-28 5:06 ` Wu, Feng
2015-07-13 9:47 ` [v5 16/19] KVM: Add an arch specific hooks in 'struct kvm_kernel_irqfd' Feng Wu
2015-07-13 13:09 ` Eric Auger
2015-07-13 9:47 ` [v5 17/19] KVM: Update Posted-Interrupts Descriptor when vCPU is preempted Feng Wu
2015-07-13 9:47 ` [v5 18/19] KVM: Update Posted-Interrupts Descriptor when vCPU is blocked Feng Wu
2015-07-13 9:47 ` [v5 19/19] KVM: Warn if 'SN' is set during posting interrupts by software Feng Wu
2015-07-13 13:19 ` [v5 00/19] Add VT-d Posted-Interrupts support Eric Auger
2015-07-14 1:08 ` Wu, Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436780855-3617-1-git-send-email-feng.wu@intel.com \
--to=feng.wu@intel.com \
--cc=alex.williamson@redhat.com \
--cc=eric.auger@linaro.org \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®