From: Feng Wu <feng.wu@intel.com>
To: kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: pbonzini@redhat.com, alex.williamson@redhat.com, joro@8bytes.org,
eric.auger@linaro.org, feng.wu@intel.com
Subject: [v5 17/19] KVM: Update Posted-Interrupts Descriptor when vCPU is preempted
Date: Mon, 13 Jul 2015 17:47:33 +0800 [thread overview]
Message-ID: <1436780855-3617-18-git-send-email-feng.wu@intel.com> (raw)
In-Reply-To: <1436780855-3617-1-git-send-email-feng.wu@intel.com>
This patch updates the Posted-Interrupts Descriptor when vCPU
is preempted.
sched out:
- Set 'SN' to suppress furture non-urgent interrupts posted for
the vCPU.
sched in:
- Clear 'SN'
- Change NDST if vCPU is scheduled to a different CPU
- Set 'NV' to POSTED_INTR_VECTOR
Signed-off-by: Feng Wu <feng.wu@intel.com>
---
arch/x86/kvm/vmx.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 35ef4c6..dd6f3d5 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -45,6 +45,7 @@
#include <asm/debugreg.h>
#include <asm/kexec.h>
#include <asm/apic.h>
+#include <asm/irq_remapping.h>
#include "trace.h"
@@ -2000,10 +2001,43 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
vmcs_writel(HOST_IA32_SYSENTER_ESP, sysenter_esp); /* 22.2.3 */
vmx->loaded_vmcs->cpu = cpu;
}
+
+ if (irq_remapping_cap(IRQ_POSTING_CAP)) {
+ struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu);
+ struct pi_desc old, new;
+ unsigned int dest;
+
+ do {
+ old.control = new.control = pi_desc->control;
+ if (vcpu->cpu != cpu) {
+ dest = cpu_physical_id(cpu);
+
+ if (x2apic_enabled())
+ new.ndst = dest;
+ else
+ new.ndst = (dest << 8) & 0xFF00;
+ }
+
+ /* Allow posting non-urgent interrupts */
+ new.sn = 0;
+
+ /* set 'NV' to 'notification vector' */
+ new.nv = POSTED_INTR_VECTOR;
+ } while (cmpxchg(&pi_desc->control, old.control,
+ new.control) != old.control);
+ }
}
static void vmx_vcpu_put(struct kvm_vcpu *vcpu)
{
+ if (irq_remapping_cap(IRQ_POSTING_CAP)) {
+ struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu);
+
+ /* Set SN when the vCPU is preempted */
+ if (vcpu->preempted)
+ pi_set_sn(pi_desc);
+ }
+
__vmx_load_host_state(to_vmx(vcpu));
if (!vmm_exclusive) {
__loaded_vmcs_clear(to_vmx(vcpu)->loaded_vmcs);
--
2.1.0
next prev parent reply other threads:[~2015-07-13 9:59 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-13 9:47 [v5 00/19] Add VT-d Posted-Interrupts support Feng Wu
2015-07-13 9:47 ` [v5 01/19] KVM: Extend struct pi_desc for VT-d Posted-Interrupts Feng Wu
2015-07-13 9:47 ` [v5 02/19] KVM: Add some helper functions for Posted-Interrupts Feng Wu
2015-07-13 9:47 ` [v5 03/19] KVM: Define a new interface kvm_intr_is_single_vcpu() Feng Wu
2015-07-13 9:47 ` [v5 04/19] KVM: Get Posted-Interrupts descriptor address from struct kvm_vcpu Feng Wu
2015-07-13 9:47 ` [v5 05/19] KVM: Add interfaces to control PI outside vmx Feng Wu
2015-07-13 9:47 ` [v5 06/19] KVM: Make struct kvm_irq_routing_table accessible Feng Wu
2015-07-13 9:47 ` [v5 07/19] KVM: make kvm_set_msi_irq() public Feng Wu
2015-07-13 9:47 ` [v5 08/19] vfio: Select IRQ_BYPASS_MANAGER for vfio PCI devices Feng Wu
2015-07-13 9:47 ` [v5 09/19] vfio: Register/unregister irq_bypass_producer Feng Wu
2015-07-13 12:55 ` Eric Auger
2015-07-13 18:57 ` Alex Williamson
2015-07-13 9:47 ` [v5 10/19] KVM, x86: Select IRQ_BYPASS_MANAGER for KVM_INTEL Feng Wu
2015-07-13 9:47 ` [v5 11/19] KVM: create kvm_irqfd.h Feng Wu
2015-07-13 9:47 ` [v5 12/19] KVM: eventfd: add irq bypass information in irqfd Feng Wu
2015-07-13 9:47 ` [v5 13/19] KVM: x86: Update IRTE for posted-interrupts Feng Wu
2015-07-13 9:47 ` [v5 14/19] KVM: x86: Add arch specific routines for irqbypass manager Feng Wu
2015-07-13 13:17 ` Eric Auger
2015-07-13 9:47 ` [v5 15/19] KVM: eventfd: add irq bypass consumer management Feng Wu
2015-07-13 13:16 ` Eric Auger
2015-07-13 13:47 ` Paolo Bonzini
2015-07-28 5:06 ` Wu, Feng
2015-07-13 9:47 ` [v5 16/19] KVM: Add an arch specific hooks in 'struct kvm_kernel_irqfd' Feng Wu
2015-07-13 13:09 ` Eric Auger
2015-07-13 9:47 ` Feng Wu [this message]
2015-07-13 9:47 ` [v5 18/19] KVM: Update Posted-Interrupts Descriptor when vCPU is blocked Feng Wu
2015-07-13 9:47 ` [v5 19/19] KVM: Warn if 'SN' is set during posting interrupts by software Feng Wu
2015-07-13 13:19 ` [v5 00/19] Add VT-d Posted-Interrupts support Eric Auger
2015-07-14 1:08 ` Wu, Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436780855-3617-18-git-send-email-feng.wu@intel.com \
--to=feng.wu@intel.com \
--cc=alex.williamson@redhat.com \
--cc=eric.auger@linaro.org \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®