From: Feng Wu <feng.wu@intel.com>
To: kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: pbonzini@redhat.com, alex.williamson@redhat.com, joro@8bytes.org,
eric.auger@linaro.org, feng.wu@intel.com
Subject: [v5 06/19] KVM: Make struct kvm_irq_routing_table accessible
Date: Mon, 13 Jul 2015 17:47:22 +0800 [thread overview]
Message-ID: <1436780855-3617-7-git-send-email-feng.wu@intel.com> (raw)
In-Reply-To: <1436780855-3617-1-git-send-email-feng.wu@intel.com>
Move struct kvm_irq_routing_table from irqchip.c to kvm_host.h,
so we can use it outside of irqchip.c.
Signed-off-by: Feng Wu <feng.wu@intel.com>
---
include/linux/kvm_host.h | 15 +++++++++++++++
virt/kvm/irqchip.c | 11 -----------
2 files changed, 15 insertions(+), 11 deletions(-)
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index ad45054..f591f7c 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -321,6 +321,21 @@ struct kvm_kernel_irq_routing_entry {
struct hlist_node link;
};
+#ifdef CONFIG_HAVE_KVM_IRQ_ROUTING
+
+struct kvm_irq_routing_table {
+ int chip[KVM_NR_IRQCHIPS][KVM_IRQCHIP_NUM_PINS];
+ struct kvm_kernel_irq_routing_entry *rt_entries;
+ u32 nr_rt_entries;
+ /*
+ * Array indexed by gsi. Each entry contains list of irq chips
+ * the gsi is connected to.
+ */
+ struct hlist_head map[0];
+};
+
+#endif
+
#ifndef KVM_PRIVATE_MEM_SLOTS
#define KVM_PRIVATE_MEM_SLOTS 0
#endif
diff --git a/virt/kvm/irqchip.c b/virt/kvm/irqchip.c
index 1d56a90..bac3b52 100644
--- a/virt/kvm/irqchip.c
+++ b/virt/kvm/irqchip.c
@@ -31,17 +31,6 @@
#include <trace/events/kvm.h>
#include "irq.h"
-struct kvm_irq_routing_table {
- int chip[KVM_NR_IRQCHIPS][KVM_IRQCHIP_NUM_PINS];
- struct kvm_kernel_irq_routing_entry *rt_entries;
- u32 nr_rt_entries;
- /*
- * Array indexed by gsi. Each entry contains list of irq chips
- * the gsi is connected to.
- */
- struct hlist_head map[0];
-};
-
int kvm_irq_map_gsi(struct kvm *kvm,
struct kvm_kernel_irq_routing_entry *entries, int gsi)
{
--
2.1.0
next prev parent reply other threads:[~2015-07-13 9:58 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-13 9:47 [v5 00/19] Add VT-d Posted-Interrupts support Feng Wu
2015-07-13 9:47 ` [v5 01/19] KVM: Extend struct pi_desc for VT-d Posted-Interrupts Feng Wu
2015-07-13 9:47 ` [v5 02/19] KVM: Add some helper functions for Posted-Interrupts Feng Wu
2015-07-13 9:47 ` [v5 03/19] KVM: Define a new interface kvm_intr_is_single_vcpu() Feng Wu
2015-07-13 9:47 ` [v5 04/19] KVM: Get Posted-Interrupts descriptor address from struct kvm_vcpu Feng Wu
2015-07-13 9:47 ` [v5 05/19] KVM: Add interfaces to control PI outside vmx Feng Wu
2015-07-13 9:47 ` Feng Wu [this message]
2015-07-13 9:47 ` [v5 07/19] KVM: make kvm_set_msi_irq() public Feng Wu
2015-07-13 9:47 ` [v5 08/19] vfio: Select IRQ_BYPASS_MANAGER for vfio PCI devices Feng Wu
2015-07-13 9:47 ` [v5 09/19] vfio: Register/unregister irq_bypass_producer Feng Wu
2015-07-13 12:55 ` Eric Auger
2015-07-13 18:57 ` Alex Williamson
2015-07-13 9:47 ` [v5 10/19] KVM, x86: Select IRQ_BYPASS_MANAGER for KVM_INTEL Feng Wu
2015-07-13 9:47 ` [v5 11/19] KVM: create kvm_irqfd.h Feng Wu
2015-07-13 9:47 ` [v5 12/19] KVM: eventfd: add irq bypass information in irqfd Feng Wu
2015-07-13 9:47 ` [v5 13/19] KVM: x86: Update IRTE for posted-interrupts Feng Wu
2015-07-13 9:47 ` [v5 14/19] KVM: x86: Add arch specific routines for irqbypass manager Feng Wu
2015-07-13 13:17 ` Eric Auger
2015-07-13 9:47 ` [v5 15/19] KVM: eventfd: add irq bypass consumer management Feng Wu
2015-07-13 13:16 ` Eric Auger
2015-07-13 13:47 ` Paolo Bonzini
2015-07-28 5:06 ` Wu, Feng
2015-07-13 9:47 ` [v5 16/19] KVM: Add an arch specific hooks in 'struct kvm_kernel_irqfd' Feng Wu
2015-07-13 13:09 ` Eric Auger
2015-07-13 9:47 ` [v5 17/19] KVM: Update Posted-Interrupts Descriptor when vCPU is preempted Feng Wu
2015-07-13 9:47 ` [v5 18/19] KVM: Update Posted-Interrupts Descriptor when vCPU is blocked Feng Wu
2015-07-13 9:47 ` [v5 19/19] KVM: Warn if 'SN' is set during posting interrupts by software Feng Wu
2015-07-13 13:19 ` [v5 00/19] Add VT-d Posted-Interrupts support Eric Auger
2015-07-14 1:08 ` Wu, Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436780855-3617-7-git-send-email-feng.wu@intel.com \
--to=feng.wu@intel.com \
--cc=alex.williamson@redhat.com \
--cc=eric.auger@linaro.org \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®