From: Feng Wu <feng.wu@intel.com>
To: kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: pbonzini@redhat.com, alex.williamson@redhat.com, joro@8bytes.org,
eric.auger@linaro.org, feng.wu@intel.com
Subject: [v5 14/19] KVM: x86: Add arch specific routines for irqbypass manager
Date: Mon, 13 Jul 2015 17:47:30 +0800 [thread overview]
Message-ID: <1436780855-3617-15-git-send-email-feng.wu@intel.com> (raw)
In-Reply-To: <1436780855-3617-1-git-send-email-feng.wu@intel.com>
Add the following x86 specific routines for irqbypass manger:
- kvm_arch_irq_bypass_add_producer
- kvm_arch_irq_bypass_del_producer
Signed-off-by: Feng Wu <feng.wu@intel.com>
---
arch/x86/include/asm/kvm_host.h | 1 +
arch/x86/kvm/x86.c | 40 ++++++++++++++++++++++++++++++++++++++++
include/linux/kvm_host.h | 2 ++
3 files changed, 43 insertions(+)
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 1b0278e..6db761b 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -24,6 +24,7 @@
#include <linux/perf_event.h>
#include <linux/pvclock_gtod.h>
#include <linux/clocksource.h>
+#include <linux/irqbypass.h>
#include <asm/pvclock-abi.h>
#include <asm/desc.h>
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index d81ac02..62bbafe 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -49,6 +49,8 @@
#include <linux/pci.h>
#include <linux/timekeeper_internal.h>
#include <linux/pvclock_gtod.h>
+#include <linux/kvm_irqfd.h>
+#include <linux/irqbypass.h>
#include <trace/events/kvm.h>
#define CREATE_TRACE_POINTS
@@ -8023,6 +8025,44 @@ out:
return ret;
}
+void kvm_arch_irq_bypass_add_producer(struct irq_bypass_consumer *cons,
+ struct irq_bypass_producer *prod)
+{
+ int ret;
+ struct kvm_kernel_irqfd *irqfd =
+ container_of(cons, struct kvm_kernel_irqfd, consumer);
+
+ irqfd->producer = prod;
+
+ ret = kvm_arch_update_pi_irte(irqfd->kvm, prod->irq, irqfd->gsi, 1);
+ WARN_ON(ret);
+}
+
+void kvm_arch_irq_bypass_del_producer(struct irq_bypass_consumer *cons,
+ struct irq_bypass_producer *prod)
+{
+ int ret;
+ struct kvm_kernel_irqfd *irqfd =
+ container_of(cons, struct kvm_kernel_irqfd, consumer);
+
+ irqfd->producer = NULL;
+
+ /*
+ * When producer of consumer is unregistered, we change back to
+ * remapped mode, so we can re-use the current implementation
+ * when the irq is masked/disabed or the consumer side (KVM
+ * int this case doesn't want to receive the interrupts.
+ */
+ ret = kvm_arch_update_pi_irte(irqfd->kvm, prod->irq, irqfd->gsi, 0);
+ WARN_ON(ret);
+}
+
+void kvm_arch_irq_consumer_init(struct irq_bypass_consumer *cons)
+{
+ cons->add_producer = kvm_arch_irq_bypass_add_producer;
+ cons->del_producer = kvm_arch_irq_bypass_del_producer;
+}
+
EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_exit);
EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_inj_virq);
EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_page_fault);
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index f591f7c..e693b3a 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -1073,6 +1073,8 @@ extern struct kvm_device_ops kvm_xics_ops;
extern struct kvm_device_ops kvm_arm_vgic_v2_ops;
extern struct kvm_device_ops kvm_arm_vgic_v3_ops;
+void kvm_arch_irq_consumer_init(struct irq_bypass_consumer *cons);
+
#ifdef CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT
static inline void kvm_vcpu_set_in_spin_loop(struct kvm_vcpu *vcpu, bool val)
--
2.1.0
next prev parent reply other threads:[~2015-07-13 10:01 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-13 9:47 [v5 00/19] Add VT-d Posted-Interrupts support Feng Wu
2015-07-13 9:47 ` [v5 01/19] KVM: Extend struct pi_desc for VT-d Posted-Interrupts Feng Wu
2015-07-13 9:47 ` [v5 02/19] KVM: Add some helper functions for Posted-Interrupts Feng Wu
2015-07-13 9:47 ` [v5 03/19] KVM: Define a new interface kvm_intr_is_single_vcpu() Feng Wu
2015-07-13 9:47 ` [v5 04/19] KVM: Get Posted-Interrupts descriptor address from struct kvm_vcpu Feng Wu
2015-07-13 9:47 ` [v5 05/19] KVM: Add interfaces to control PI outside vmx Feng Wu
2015-07-13 9:47 ` [v5 06/19] KVM: Make struct kvm_irq_routing_table accessible Feng Wu
2015-07-13 9:47 ` [v5 07/19] KVM: make kvm_set_msi_irq() public Feng Wu
2015-07-13 9:47 ` [v5 08/19] vfio: Select IRQ_BYPASS_MANAGER for vfio PCI devices Feng Wu
2015-07-13 9:47 ` [v5 09/19] vfio: Register/unregister irq_bypass_producer Feng Wu
2015-07-13 12:55 ` Eric Auger
2015-07-13 18:57 ` Alex Williamson
2015-07-13 9:47 ` [v5 10/19] KVM, x86: Select IRQ_BYPASS_MANAGER for KVM_INTEL Feng Wu
2015-07-13 9:47 ` [v5 11/19] KVM: create kvm_irqfd.h Feng Wu
2015-07-13 9:47 ` [v5 12/19] KVM: eventfd: add irq bypass information in irqfd Feng Wu
2015-07-13 9:47 ` [v5 13/19] KVM: x86: Update IRTE for posted-interrupts Feng Wu
2015-07-13 9:47 ` Feng Wu [this message]
2015-07-13 13:17 ` [v5 14/19] KVM: x86: Add arch specific routines for irqbypass manager Eric Auger
2015-07-13 9:47 ` [v5 15/19] KVM: eventfd: add irq bypass consumer management Feng Wu
2015-07-13 13:16 ` Eric Auger
2015-07-13 13:47 ` Paolo Bonzini
2015-07-28 5:06 ` Wu, Feng
2015-07-13 9:47 ` [v5 16/19] KVM: Add an arch specific hooks in 'struct kvm_kernel_irqfd' Feng Wu
2015-07-13 13:09 ` Eric Auger
2015-07-13 9:47 ` [v5 17/19] KVM: Update Posted-Interrupts Descriptor when vCPU is preempted Feng Wu
2015-07-13 9:47 ` [v5 18/19] KVM: Update Posted-Interrupts Descriptor when vCPU is blocked Feng Wu
2015-07-13 9:47 ` [v5 19/19] KVM: Warn if 'SN' is set during posting interrupts by software Feng Wu
2015-07-13 13:19 ` [v5 00/19] Add VT-d Posted-Interrupts support Eric Auger
2015-07-14 1:08 ` Wu, Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436780855-3617-15-git-send-email-feng.wu@intel.com \
--to=feng.wu@intel.com \
--cc=alex.williamson@redhat.com \
--cc=eric.auger@linaro.org \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®