* Re: Please [not found] <NCBBLCAMGIICAAEFKIENIEOECDAA.henrik@lassen.dk> @ 2002-03-02 15:43 ` Hans-Peter Jansen 2002-03-02 23:03 ` Please john slee 0 siblings, 1 reply; 5+ messages in thread From: Hans-Peter Jansen @ 2002-03-02 15:43 UTC (permalink / raw) To: Henrik Lassen; +Cc: linux-kernel, Andre Hedrick, ataraid-list On Saturday, 2. March 2002 00:27, Henrik Lassen wrote: > Hi > > I saw your posting Promise TX4 - I bought two controllers (shit). Confirmed. > Using: Redhat 7.2 Egnima Kernel 2.4.7-10 > > I can se the first two disk, but redhat crashes if I try to connect the > others. The problem is called Andre Hedrick, a guy who is talking in miracles, but seems to be unable to fix either the issues with: - the single TX4 with multiple PDC20270 nor: - multiple TX2 with PDC20268 or at least ignores further communication on that problems, if you don't use some magic storage peoples language.(*) TM in a parallel universe, not too far from here... Most other kernel guys prefer SCSI or simple IDE solutions. > Please tell how you got IDE3-4 working and if you are up and running > satisfactory. Nope. In one board, I got two TX2 running fine. In different other boards (tyan thunder dual athlon), only a single TX2 is working fine. (System crashed shortly after IDE driver init in above mentioned combinations. BTW: This is a 2 way communication problem: - Andre ignores bugging user requests to some extend - He gets ignored by leading kernel hackers to some extend both based on (*) One can only hope, that Andre gets his bablefish running, and using it then to communicate with the rest of _this_ universe. > > Rgds > > Henrik Cheers, Hans-Peter ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Please 2002-03-02 15:43 ` Please Hans-Peter Jansen @ 2002-03-02 23:03 ` john slee 2002-03-03 0:25 ` Please Andre Hedrick 0 siblings, 1 reply; 5+ messages in thread From: john slee @ 2002-03-02 23:03 UTC (permalink / raw) To: Hans-Peter Jansen Cc: Henrik Lassen, linux-kernel, Andre Hedrick, ataraid-list On Sat, Mar 02, 2002 at 04:43:58PM +0100, Hans-Peter Jansen wrote: > The problem is called Andre Hedrick, a guy who is talking in miracles, > but seems to be unable to fix either the issues with: > - the single TX4 with multiple PDC20270 > nor: > - multiple TX2 with PDC20268 > > or at least ignores further communication on that problems, if you > don't use some magic storage peoples language.(*) TM in a parallel > universe, not too far from here... so you're going to fix the problems yourself then? j. -- R N G G "Well, there it goes again... And we just sit I G G G here without opposable thumbs." -- gary larson ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Please 2002-03-02 23:03 ` Please john slee @ 2002-03-03 0:25 ` Andre Hedrick 2002-03-03 13:49 ` Please Hans-Peter Jansen 0 siblings, 1 reply; 5+ messages in thread From: Andre Hedrick @ 2002-03-03 0:25 UTC (permalink / raw) To: john slee; +Cc: Hans-Peter Jansen, Henrik Lassen, linux-kernel, ataraid-list On Sun, 3 Mar 2002, john slee wrote: > On Sat, Mar 02, 2002 at 04:43:58PM +0100, Hans-Peter Jansen wrote: > > The problem is called Andre Hedrick, a guy who is talking in miracles, > > but seems to be unable to fix either the issues with: > > - the single TX4 with multiple PDC20270 > > nor: > > - multiple TX2 with PDC20268 > > > > or at least ignores further communication on that problems, if you > > don't use some magic storage peoples language.(*) TM in a parallel > > universe, not too far from here... > > so you're going to fix the problems yourself then? > > j. You mean this does not work for you? Serious question, not being flip. Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD7441: IDE controller on PCI bus 00 dev 39 AMD7441: chipset revision 3 AMD7441: not 100% native mode: will probe irqs later AMD7441: disabling single-word DMA support (revision < C4) ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio PDC20270: IDE controller on PCI bus 03 dev 08 PDC20270: chipset revision 2 PDC20270: not 100% native mode: will probe irqs later ide2: BM-DMA at 0x9000-0x9007, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0x9008-0x900f, BIOS settings: hdg:pio, hdh:pio PDC20270: IDE controller on PCI bus 03 dev 10 PDC20270: chipset revision 2 PDC20270: not 100% native mode: will probe irqs later PDC20270: ROM enabled at 0x000dc000 ide4: BM-DMA at 0xa400-0xa407, BIOS settings: hdi:pio, hdj:pio ide5: BM-DMA at 0xa408-0xa40f, BIOS settings: hdk:pio, hdl:pio hda: IBM-DTLA-307075, ATA DISK drive hdc: LTN242, ATAPI CD/DVD-ROM drive hde: Maxtor 4G160J8, ATA DISK drive hdg: Maxtor 4G160J8, ATA DISK drive hdi: Maxtor 4G160J8, ATA DISK drive hdk: Maxtor 4G160J8, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0x8000-0x8007,0x8402 on irq 11 ide3 at 0x8800-0x8807,0x8c02 on irq 11 ide4 at 0x9400-0x9407,0x9802 on irq 11 ide5 at 0x9c00-0x9c07,0xa002 on irq 11 hda: 150136560 sectors (76870 MB) w/1916KiB Cache, CHS=9345/255/63, UDMA(100) hde: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(100) hdg: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(100) hdi: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(100) hdk: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 > /dev/ide/host2/bus0/target0/lun0: p1 /dev/ide/host2/bus1/target0/lun0: p1 /dev/ide/host4/bus0/target0/lun0: p1 /dev/ide/host4/bus1/target0/lun0: p1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD7441: IDE controller on PCI bus 00 dev 39 AMD7441: chipset revision 3 AMD7441: not 100% native mode: will probe irqs later AMD7441: disabling single-word DMA support (revision < C4) ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:DMA, hdd:pio PDC20269: IDE controller on PCI bus 00 dev 40 PDC20269: chipset revision 2 PDC20269: not 100% native mode: will probe irqs later ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio PDC20269: IDE controller on PCI bus 00 dev 48 PDC20269: chipset revision 2 PDC20269: not 100% native mode: will probe irqs later ide4: BM-DMA at 0xe800-0xe807, BIOS settings: hdi:pio, hdj:pio ide5: BM-DMA at 0xe808-0xe80f, BIOS settings: hdk:pio, hdl:pio hda: IBM-DTLA-307075, ATA DISK drive hdc: LTN242, ATAPI CD/DVD-ROM drive hde: Maxtor 4G160J8, ATA DISK drive hdg: Maxtor 4G160J8, ATA DISK drive hdi: Maxtor 4G160J8, ATA DISK drive hdk: Maxtor 4G160J8, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0xc400-0xc407,0xc802 on irq 10 ide3 at 0xcc00-0xcc07,0xd002 on irq 10 ide4 at 0xd800-0xd807,0xdc02 on irq 11 ide5 at 0xe000-0xe007,0xe402 on irq 11 hda: 150136560 sectors (76870 MB) w/1916KiB Cache, CHS=9345/255/63, UDMA(100) hde: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(133) hdg: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(133) hdi: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(133) hdk: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(133) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 > /dev/ide/host2/bus0/target0/lun0: p1 /dev/ide/host2/bus1/target0/lun0: p1 /dev/ide/host4/bus0/target0/lun0: p1 /dev/ide/host4/bus1/target0/lun0: p1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Clearly they work, the obvious point that is missed is the work is not being accepted. Oh and I am human, too, regardless what most think or hate about me. Regards, Andre Hedrick Linux Disk Certification Project Linux ATA Development ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Please 2002-03-03 0:25 ` Please Andre Hedrick @ 2002-03-03 13:49 ` Hans-Peter Jansen 2002-03-03 20:14 ` Please Andre Hedrick 0 siblings, 1 reply; 5+ messages in thread From: Hans-Peter Jansen @ 2002-03-03 13:49 UTC (permalink / raw) To: Andre Hedrick, john slee Cc: Hans-Peter Jansen, Henrik Lassen, linux-kernel, ataraid-list On Sunday, 3. March 2002 01:25, Andre Hedrick wrote: > On Sun, 3 Mar 2002, john slee wrote: > > On Sat, Mar 02, 2002 at 04:43:58PM +0100, Hans-Peter Jansen wrote: > > > The problem is called Andre Hedrick, a guy who is talking in miracles, > > > but seems to be unable to fix either the issues with: > > > - the single TX4 with multiple PDC20270 > > > nor: > > > - multiple TX2 with PDC20268 > > > > > > or at least ignores further communication on that problems, if you > > > don't use some magic storage peoples language.(*) TM in a parallel > > > universe, not too far from here... > > > > so you're going to fix the problems yourself then? > > > > j. > > You mean this does not work for you? Serious question, not being flip. > > Uniform Multi-Platform E-IDE driver Revision: 6.31 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > AMD7441: IDE controller on PCI bus 00 dev 39 > AMD7441: chipset revision 3 > AMD7441: not 100% native mode: will probe irqs later > AMD7441: disabling single-word DMA support (revision < C4) > ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio > PDC20270: IDE controller on PCI bus 03 dev 08 > PDC20270: chipset revision 2 > PDC20270: not 100% native mode: will probe irqs later > ide2: BM-DMA at 0x9000-0x9007, BIOS settings: hde:pio, hdf:pio > ide3: BM-DMA at 0x9008-0x900f, BIOS settings: hdg:pio, hdh:pio > PDC20270: IDE controller on PCI bus 03 dev 10 > PDC20270: chipset revision 2 > PDC20270: not 100% native mode: will probe irqs later > PDC20270: ROM enabled at 0x000dc000 > ide4: BM-DMA at 0xa400-0xa407, BIOS settings: hdi:pio, hdj:pio > ide5: BM-DMA at 0xa408-0xa40f, BIOS settings: hdk:pio, hdl:pio > hda: IBM-DTLA-307075, ATA DISK drive > hdc: LTN242, ATAPI CD/DVD-ROM drive > hde: Maxtor 4G160J8, ATA DISK drive > hdg: Maxtor 4G160J8, ATA DISK drive > hdi: Maxtor 4G160J8, ATA DISK drive > hdk: Maxtor 4G160J8, ATA DISK drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > ide2 at 0x8000-0x8007,0x8402 on irq 11 > ide3 at 0x8800-0x8807,0x8c02 on irq 11 > ide4 at 0x9400-0x9407,0x9802 on irq 11 > ide5 at 0x9c00-0x9c07,0xa002 on irq 11 > hda: 150136560 sectors (76870 MB) w/1916KiB Cache, CHS=9345/255/63, > UDMA(100) hde: 320173056 sectors (163929 MB) w/2048KiB Cache, > CHS=19929/255/63, UDMA(100) hdg: 320173056 sectors (163929 MB) w/2048KiB > Cache, CHS=19929/255/63, UDMA(100) hdi: 320173056 sectors (163929 MB) > w/2048KiB Cache, CHS=19929/255/63, UDMA(100) hdk: 320173056 sectors (163929 > MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(100) Partition check: > /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 > > /dev/ide/host2/bus0/target0/lun0: p1 > /dev/ide/host2/bus1/target0/lun0: p1 > /dev/ide/host4/bus0/target0/lun0: p1 > /dev/ide/host4/bus1/target0/lun0: p1 > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > > > > Uniform Multi-Platform E-IDE driver Revision: 6.31 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > AMD7441: IDE controller on PCI bus 00 dev 39 > AMD7441: chipset revision 3 > AMD7441: not 100% native mode: will probe irqs later > AMD7441: disabling single-word DMA support (revision < C4) > ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:DMA, hdd:pio > PDC20269: IDE controller on PCI bus 00 dev 40 > PDC20269: chipset revision 2 > PDC20269: not 100% native mode: will probe irqs later > ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio > ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio > PDC20269: IDE controller on PCI bus 00 dev 48 > PDC20269: chipset revision 2 > PDC20269: not 100% native mode: will probe irqs later > ide4: BM-DMA at 0xe800-0xe807, BIOS settings: hdi:pio, hdj:pio > ide5: BM-DMA at 0xe808-0xe80f, BIOS settings: hdk:pio, hdl:pio > hda: IBM-DTLA-307075, ATA DISK drive > hdc: LTN242, ATAPI CD/DVD-ROM drive > hde: Maxtor 4G160J8, ATA DISK drive > hdg: Maxtor 4G160J8, ATA DISK drive > hdi: Maxtor 4G160J8, ATA DISK drive > hdk: Maxtor 4G160J8, ATA DISK drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > ide2 at 0xc400-0xc407,0xc802 on irq 10 > ide3 at 0xcc00-0xcc07,0xd002 on irq 10 > ide4 at 0xd800-0xd807,0xdc02 on irq 11 > ide5 at 0xe000-0xe007,0xe402 on irq 11 > hda: 150136560 sectors (76870 MB) w/1916KiB Cache, CHS=9345/255/63, > UDMA(100) hde: 320173056 sectors (163929 MB) w/2048KiB Cache, > CHS=19929/255/63, UDMA(133) hdg: 320173056 sectors (163929 MB) w/2048KiB > Cache, CHS=19929/255/63, UDMA(133) hdi: 320173056 sectors (163929 MB) > w/2048KiB Cache, CHS=19929/255/63, UDMA(133) hdk: 320173056 sectors (163929 > MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(133) Partition check: > /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 > > /dev/ide/host2/bus0/target0/lun0: p1 > /dev/ide/host2/bus1/target0/lun0: p1 > /dev/ide/host4/bus0/target0/lun0: p1 > /dev/ide/host4/bus1/target0/lun0: p1 > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > Looks promising, indeed. Will try it again, soon... In general, I fear, that the whole ATA technology commits suiside because of it's own inherent complexity and historical development. > Clearly they work, the obvious point that is missed is the work is not > being accepted. Oh and I am human, too, regardless what most think or > hate about me. And I understand your point. But light appears on the horizon. Your work is being accepted for 2.5 and 2.4-ac now, and there is hope, that sometimes in the near future a generally accepted, and (nearly) flawless version of 2.4 will be released. For now, diff/patch seems to remain everyone's favorite tools ;) > Regards, > > Andre Hedrick > Linux Disk Certification Project Linux ATA Development Cheers, Hans-Peter ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Please 2002-03-03 13:49 ` Please Hans-Peter Jansen @ 2002-03-03 20:14 ` Andre Hedrick 0 siblings, 0 replies; 5+ messages in thread From: Andre Hedrick @ 2002-03-03 20:14 UTC (permalink / raw) To: Hans-Peter Jansen; +Cc: john slee, Henrik Lassen, linux-kernel, ataraid-list I am sorry, that was done a long time agin and even updated a few times to no acceptance. http://www.kernel.org/pub/linux/kernel/people/hedrick/2.4.{16,17,18} Sorry it is not clear. Regards, On Sun, 3 Mar 2002, Hans-Peter Jansen wrote: > On Sunday, 3. March 2002 01:25, Andre Hedrick wrote: > > On Sun, 3 Mar 2002, john slee wrote: > > > On Sat, Mar 02, 2002 at 04:43:58PM +0100, Hans-Peter Jansen wrote: > > > > The problem is called Andre Hedrick, a guy who is talking in miracles, > > > > but seems to be unable to fix either the issues with: > > > > - the single TX4 with multiple PDC20270 > > > > nor: > > > > - multiple TX2 with PDC20268 > > > > > > > > or at least ignores further communication on that problems, if you > > > > don't use some magic storage peoples language.(*) TM in a parallel > > > > universe, not too far from here... > > > > > > so you're going to fix the problems yourself then? > > > > > > j. > > > > You mean this does not work for you? Serious question, not being flip. > > > > Uniform Multi-Platform E-IDE driver Revision: 6.31 > > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > > AMD7441: IDE controller on PCI bus 00 dev 39 > > AMD7441: chipset revision 3 > > AMD7441: not 100% native mode: will probe irqs later > > AMD7441: disabling single-word DMA support (revision < C4) > > ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio > > ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio > > PDC20270: IDE controller on PCI bus 03 dev 08 > > PDC20270: chipset revision 2 > > PDC20270: not 100% native mode: will probe irqs later > > ide2: BM-DMA at 0x9000-0x9007, BIOS settings: hde:pio, hdf:pio > > ide3: BM-DMA at 0x9008-0x900f, BIOS settings: hdg:pio, hdh:pio > > PDC20270: IDE controller on PCI bus 03 dev 10 > > PDC20270: chipset revision 2 > > PDC20270: not 100% native mode: will probe irqs later > > PDC20270: ROM enabled at 0x000dc000 > > ide4: BM-DMA at 0xa400-0xa407, BIOS settings: hdi:pio, hdj:pio > > ide5: BM-DMA at 0xa408-0xa40f, BIOS settings: hdk:pio, hdl:pio > > hda: IBM-DTLA-307075, ATA DISK drive > > hdc: LTN242, ATAPI CD/DVD-ROM drive > > hde: Maxtor 4G160J8, ATA DISK drive > > hdg: Maxtor 4G160J8, ATA DISK drive > > hdi: Maxtor 4G160J8, ATA DISK drive > > hdk: Maxtor 4G160J8, ATA DISK drive > > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > ide1 at 0x170-0x177,0x376 on irq 15 > > ide2 at 0x8000-0x8007,0x8402 on irq 11 > > ide3 at 0x8800-0x8807,0x8c02 on irq 11 > > ide4 at 0x9400-0x9407,0x9802 on irq 11 > > ide5 at 0x9c00-0x9c07,0xa002 on irq 11 > > hda: 150136560 sectors (76870 MB) w/1916KiB Cache, CHS=9345/255/63, > > UDMA(100) hde: 320173056 sectors (163929 MB) w/2048KiB Cache, > > CHS=19929/255/63, UDMA(100) hdg: 320173056 sectors (163929 MB) w/2048KiB > > Cache, CHS=19929/255/63, UDMA(100) hdi: 320173056 sectors (163929 MB) > > w/2048KiB Cache, CHS=19929/255/63, UDMA(100) hdk: 320173056 sectors (163929 > > MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(100) Partition check: > > /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 > > > /dev/ide/host2/bus0/target0/lun0: p1 > > /dev/ide/host2/bus1/target0/lun0: p1 > > /dev/ide/host4/bus0/target0/lun0: p1 > > /dev/ide/host4/bus1/target0/lun0: p1 > > Floppy drive(s): fd0 is 1.44M > > FDC 0 is a post-1991 82077 > > > > > > > > Uniform Multi-Platform E-IDE driver Revision: 6.31 > > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > > AMD7441: IDE controller on PCI bus 00 dev 39 > > AMD7441: chipset revision 3 > > AMD7441: not 100% native mode: will probe irqs later > > AMD7441: disabling single-word DMA support (revision < C4) > > ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:DMA, hdb:pio > > ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:DMA, hdd:pio > > PDC20269: IDE controller on PCI bus 00 dev 40 > > PDC20269: chipset revision 2 > > PDC20269: not 100% native mode: will probe irqs later > > ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio > > ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio > > PDC20269: IDE controller on PCI bus 00 dev 48 > > PDC20269: chipset revision 2 > > PDC20269: not 100% native mode: will probe irqs later > > ide4: BM-DMA at 0xe800-0xe807, BIOS settings: hdi:pio, hdj:pio > > ide5: BM-DMA at 0xe808-0xe80f, BIOS settings: hdk:pio, hdl:pio > > hda: IBM-DTLA-307075, ATA DISK drive > > hdc: LTN242, ATAPI CD/DVD-ROM drive > > hde: Maxtor 4G160J8, ATA DISK drive > > hdg: Maxtor 4G160J8, ATA DISK drive > > hdi: Maxtor 4G160J8, ATA DISK drive > > hdk: Maxtor 4G160J8, ATA DISK drive > > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > ide1 at 0x170-0x177,0x376 on irq 15 > > ide2 at 0xc400-0xc407,0xc802 on irq 10 > > ide3 at 0xcc00-0xcc07,0xd002 on irq 10 > > ide4 at 0xd800-0xd807,0xdc02 on irq 11 > > ide5 at 0xe000-0xe007,0xe402 on irq 11 > > hda: 150136560 sectors (76870 MB) w/1916KiB Cache, CHS=9345/255/63, > > UDMA(100) hde: 320173056 sectors (163929 MB) w/2048KiB Cache, > > CHS=19929/255/63, UDMA(133) hdg: 320173056 sectors (163929 MB) w/2048KiB > > Cache, CHS=19929/255/63, UDMA(133) hdi: 320173056 sectors (163929 MB) > > w/2048KiB Cache, CHS=19929/255/63, UDMA(133) hdk: 320173056 sectors (163929 > > MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(133) Partition check: > > /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 > > > /dev/ide/host2/bus0/target0/lun0: p1 > > /dev/ide/host2/bus1/target0/lun0: p1 > > /dev/ide/host4/bus0/target0/lun0: p1 > > /dev/ide/host4/bus1/target0/lun0: p1 > > Floppy drive(s): fd0 is 1.44M > > FDC 0 is a post-1991 82077 > > > > Looks promising, indeed. Will try it again, soon... > > In general, I fear, that the whole ATA technology commits suiside because > of it's own inherent complexity and historical development. > > > Clearly they work, the obvious point that is missed is the work is not > > being accepted. Oh and I am human, too, regardless what most think or > > hate about me. > > And I understand your point. But light appears on the horizon. > Your work is being accepted for 2.5 and 2.4-ac now, and there is > hope, that sometimes in the near future a generally accepted, and > (nearly) flawless version of 2.4 will be released. > > For now, diff/patch seems to remain everyone's favorite tools ;) > > > Regards, > > > > Andre Hedrick > > Linux Disk Certification Project Linux ATA Development > > Cheers, > Hans-Peter > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > Andre Hedrick Linux Disk Certification Project Linux ATA Development ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2002-03-03 20:15 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <NCBBLCAMGIICAAEFKIENIEOECDAA.henrik@lassen.dk>
2002-03-02 15:43 ` Please Hans-Peter Jansen
2002-03-02 23:03 ` Please john slee
2002-03-03 0:25 ` Please Andre Hedrick
2002-03-03 13:49 ` Please Hans-Peter Jansen
2002-03-03 20:14 ` Please Andre Hedrick
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®